Inverter semi-automatic welding machine AURORA Dynamics 200 EXPERT
Russia
China
Description
The AURORA inverter can operate in 6 modes:
- MIG/MAG
- NO GAS
- PULSE
- DOUBLE PULSE
- LIFT TIG DC
- MMA
Dynamics 200 EXPERT will help you solve a variety of tasks from welding aluminum and stainless steel to working with ferrous metal. PULSE and DOUBLE PULSE modes will allow welding products at a much more "advanced" level in comparison with pulse-free sources. Aurora engineers have tried to equip the new product line in accordance with their many years of experience in selling equipment in Russia. Prior to the launch of mass production, the devices underwent a long cycle of testing of electronic components, power components and repeated inspections of welding properties. AURORA Dynamics 200 EXPERT meets all the stated characteristics and requirements of the European standard EN60974-1. The EXPERT demonstrates excellent welding results in the entire range of settings.
The machine's library of synergetic welding programs allows you to work with the following materials:
- Fe + CO2
- Fe + MIX 80/20
- AlMg + Ar100%
- AlSi + Ar100%
- CrNi MIX 98/2
- NO GAS
A distinctive feature of the device is the European control logic. There is no unnecessary information on the main screen, at the same time, the welder controls all the basic welding parameters. The large, contrasting fonts are easy to read.
The intuitive cyclogram of the welding mode allows a professional welder to easily adjust almost 2 dozen parameters of special modes:
- soft start
- pre-gas
- starting
- current voltage
- start current corrector start current
- time transition time to main current peak current voltage
- peak current
- corrector
- base current voltage base current
- corrector
- pulse
- rate pulse
- rate transition time to finish current
- finish
- current voltage finish current corrector
- finish current time
- post gas
The burner operating modes can be adjusted in standard modes 2T and 4T, in special modes S2T, S4T, as well as in rare modes:
- TWIN - change of 2 operating currents by pressing the burner button
- SPOT - spot welding mode
- CONTINUOUS SPOT is a point welding mode with a preset pause interval.
The machine is equipped with an all-wheel drive 4x4 4-roller feeding mechanism. The large feeding compartment allows the installation of standard D200 bobbins and large D300 bobbins. There are gas purge and wire pulling buttons in the feeder compartment.
The inverter is equipped with the MMA function: ANTISTICK prevents the electrode from calcining. The VRD switchable function protects the welder when working in difficult conditions. Hot start and arc forcing can be customized by the welder for a specific task.
The LIFT TIG DC mode, if necessary, will help in the work for decorative seams or when working with thin metals.
The honest characteristics of the AURORA Dynamics 200 EXPERT will help you cope with any welding task.
Dynamics 200 EXPERT is a professional semi-automatic machine for welding aluminum. The device is equipped with a special consumable from the factory: a set of rollers with a U-shaped groove, a current-removing tip, a three-meter SN 24 burner with a preset red Teflon channel. This is a professional burner from the American manufacturer NORTH, focused on welding aluminum. The rotary gander will help when working in difficult spatial positions. The red twisted channel (for 1.0-1.2mm wire) is also in the box and can be installed in the burner if it is necessary to work with steel wire.
Additional functions in MMA mode:
- Switchable VRD - the function of reducing the no-load voltage to 12V, for the safety of the master
- Antistick (anti—sticking of the electrode) is a function that automatically reduces the welding current when the electrode sticks. Prevents calcination of the electrode, preserves its suitability and makes it easy to separate the electrode from the metal to continue working while maintaining welding parameters.;
- Configurable Hot Start - peak current at the moment of arc ignition for a smooth start.
- Adjustable forceArc is a function of the device that increases the welding current at the moment of separation of the metal droplet from the electrode. Reduces the chance of electrode sticking and increases the stability of arc burning. Gorenje
Settings in LIFT TIG DC mode:
- lifting time
- welding current
The most versatile version of the TIG burner for this unit is the TIG 26V valve, for connection you will need a TIG PLUG adapter.
Characteristics Inverter semi-automatic welding machine AURORA Dynamics 200 EXPERT
General Specifications
China
Russia
Dimensions of product
Specifications
Indicates the degree of protection of the device body from penetration of solid objects and moisture.
-
IP21 provides protection against large particles and vertically falling droplets (suitable only for dry, indoor areas).
- IP23 means protection against oblique rain (splashes at an angle up to 60°), which allows safe operation of the device on open construction sites.
Indicates the degree of protection of the device body from penetration of solid objects and moisture.
-
IP21 provides protection against large particles and vertically falling droplets (suitable only for dry, indoor areas).
- IP23 means protection against oblique rain (splashes at an angle up to 60°), which allows safe operation of the device on open construction sites.
The voltage at the terminals is switched on before the arc is ignited. The higher this value (closer to 80-100 V), the easier and faster the initial ignition occurs, and the more stable the arc burns (especially on rusty metal or with base-coated electrodes). Low values are typical for devices with a safe voltage reduction system (VRD).
The voltage at the terminals is switched on before the arc is ignited. The higher this value (closer to 80-100 V), the easier and faster the initial ignition occurs, and the more stable the arc burns (especially on rusty metal or with base-coated electrodes). Low values are typical for devices with a safe voltage reduction system (VRD).
The duration of activation (PV). This is the ratio of continuous operation time to cooling time in a 10-minute cycle. The value "200/40" means that at a current of 200 A, the device cooks for 4 minutes, and then cools down for 6 minutes. For intensive production and production lines, models with PV from 60% to 100% at operating currents should be selected.
The duration of activation (PV). This is the ratio of continuous operation time to cooling time in a 10-minute cycle. The value "200/40" means that at a current of 200 A, the device cooks for 4 minutes, and then cools down for 6 minutes. For intensive production and production lines, models with PV from 60% to 100% at operating currents should be selected.
The minimum thickness of the supported wire. The use of 0.6–0.8 mm wire is critically important for car body repair and work with sheet metal (up to 1-1.5 mm), as this minimizes heat build-up and avoids burning of parts.
The minimum thickness of the supported wire. The use of 0.6–0.8 mm wire is critically important for car body repair and work with sheet metal (up to 1-1.5 mm), as this minimizes heat build-up and avoids burning of parts.
The maximum diameter of the welding wire for which the feeding mechanism is designed. Thick wire (from 1.2 mm and above) is used for high-performance welding of massive industrial metal structures, providing fast filling of the welding pool.
The maximum diameter of the welding wire for which the feeding mechanism is designed. Thick wire (from 1.2 mm and above) is used for high-performance welding of massive industrial metal structures, providing fast filling of the welding pool.
The lower threshold of current regulation. The minimum values (10-30 A) are necessary for jewelry work, restoration, welding of tinplate and automobile panels without the risk of their warping or formation of through holes.
The lower threshold of current regulation. The minimum values (10-30 A) are necessary for jewelry work, restoration, welding of tinplate and automobile panels without the risk of their warping or formation of through holes.
Maximum current in semi-automatic mode. It directly affects the maximum thickness of the metal being melted in one pass. 160-200 A is sufficient for household needs, and devices with a current of 300 to 500 A are required for welding heavy steel structures in production.
Maximum current in semi-automatic mode. It directly affects the maximum thickness of the metal being melted in one pass. 160-200 A is sufficient for household needs, and devices with a current of 300 to 500 A are required for welding heavy steel structures in production.
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
Similar products
Buy with this product
Reviews about Inverter semi-automatic welding machine AURORA Dynamics 200 EXPERT ( 0 )