Russia
Russia
Description
PTK MASTER MIG 230 SYNERGY D88 is a modern digital semi—automatic welding machine for welding in a protective gas environment with synergetics. The device is equipped with an additional function of manual arc welding MMA and argon arc welding in the environment of protective gases Lift TIG. Synergetic welding process control settings allow you to select the optimal parameters of pulses and welding current. In this case, the thickness, properties of the metal product and welding materials are taken into account — the diameter of the welding wire, the type and composition of the protective gas.
The functionality of the MIG and MIG SYN mode:
- Gas selection: welding in Carbon dioxide, in a mixture of Argon and Carbon dioxide, welding without gas for powder wire, not used in MIG SYN mode.
- The inductance adjustment allows you to additionally adjust the stiffness of the welding arc.
- The ability to select 2-stroke and 4-stroke modes of operation of the welding torch. The function is applicable when welding short or long seams.
- The hot start in MIG mode ensures easy and smooth arc excitation.
- The wire feed rate is up to the primary circuit, which facilitates arc ignition in MIG mode.
The functionality of the MMA mode:
- The adjustable arc afterburner improves the stability of the electrode gorenje.
- Hot start in MMA mode makes it easy to ignite the welding electrode due to a short-term increase in the welding current at the beginning of welding.
- Reducing the idle voltage for safe operation.
- The anti-sticking function of the electrode reduces the likelihood of the electrode sticking to the product when the arc is ignited.
- Welding on forward and reverse polarity.
Features:
- Wire idling function.
- Welding wire diameter selection function
- Digital display of welding parameters.
- Automatic overheating protection.
- Metal wire feed mechanism.
- A coil with a wire weighing up to 5 kg can be installed in the device.
- The warranty is 2 years.
Technical specifications:
- Supply voltage: 220±15% V.
- Power supply frequency: 50 Hz.
- MIG current adjustment range: 40 - 230 A.
- MMA current adjustment range: 40 - 190 A.
- TIG current adjustment range: 10 - 230 A.
- MIG power consumption: 7.3 kW.
- MMA power consumption: 6.5 kW.
- TIG power consumption: 4.5 kW.
- No-load voltage: 60 V.
- Power factor: 0.73.
- PV: 60%.
- EFFICIENCY: 80%.
- Type of feeding mechanism: Built-in.
- Maximum weight of the coil with wire: 5 kg.
- Welding wire diameter: 0.6 - 1.0 mm.
- MMA electrode diameter: 1.5 - 5.0 mm.
- Diameter of the TIG electrode: 1.0 - 4.0 mm.
- Degree of insulation: F.
- Protection class: IP21.
- Power panel connectors: 35 - 50.
Equipment:
- Inverter semi-automatic welding machine - 1 pc.
- Semi-automatic burner MIG 15 series - 1 pc.
- Grounding terminal - 1 pc.
- Electrode holder - 1 pc.
- Spare parts and accessories - 1 set.
- Instruction manual - 1 pc.
Characteristics
General Specifications
Russia
Russia
Dimensions of packaged product
Dimensions of product
Specifications
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
