Semi-automatic inverter welding machine MIG/MMA-230 DPP (220V) "BRIMA"
Russia
China
Description
The MIG/MMA-230 DPP 220V inverter welding machine Brima CB-00000053 is a new generation digital inverter semi–automatic welding machine designed for welding with welding wire in protective gases (this welding method in accordance with ISO 4063-90 has the following abbreviation – MIG Metal Inert Gas, MAG Metal Active Gas). This machine is used for welding carbon and alloy steels, as well as aluminum. Active gases (carbon dioxide, gas mixture) are used as protective gases when welding MAG, which take part in the formation of the welded joint, and inert – when welding MIG (argon, helium), which do not chemically interact with metals and practically do not dissolve in them. Due to the protection, the welding zone is not exposed to harmful oxidative effects of the environment and the quality of the welded joint increases dramatically.
Advantages:
- With the help of this device, it is possible to weld thin-sheet metal, thanks to the double pulsation mode.
- Double pulsation allows welding in any spatial position.
- Supports burner operating modes such as 2T, 4T, special 4T, SPOT
- It is possible to install and save up to 10 working welding programs.
- In MMA mode, it is equipped with the functions of hot Start, Arc Force, AntiStick, and also has a built-in no-load voltage limitation unit (VRD unit).
- It is possible to use a wire with a diameter of 08/10/12 mm.
- Using the control panel and digital devices, welding modes, current and voltage values, welding wire diameter, type of protective gas, and current polarity can be selected and set.
- Reliable grounding of the source is carried out due to the presence of a grounding wire in the network cable, and in the absence of grounding contacts in the network itself, grounding should be done using the grounding bolt located on the back panel of the source.
- There is a power indicator on the front panel. There is also a protection indicator that is triggered as a result of an overload. The device will turn on on its own when the temperature inside drops to the required level.
- The BRIMA MIG/MMA230 DPP has stable welding characteristics when the mains voltage fluctuates up to ±10%. The welding voltage is adjusted based on the optimal values of seam width, seam reinforcement, weld depth and other required parameters specified in the relevant standards.
- When welding in a protective gas environment, a unique control scheme operates, which ensures less splashing, stable arc during welding, excellent weld quality and high productivity.
- It has a good load period of PN=60% and protection class IP21S
- The BRIMA MIG/MMA230 DPP is easy to move around the work area thanks to the handle located on the top of the case.
Technical specifications:
- Welding mode - with or without gas
- Max current - 230 A
- Min current - 50 A
- PV at maximum current - 60 %
- No-load voltage - 69 V
- The rated input voltage is 220 V
- Welding type - MIG/MAG, MMA, TIG, FCAW, SYN
- Min input voltage - 220 V
- Degree of protection - IP21S
- Burner connector - EURO
- Max wire diameter - 1.2
- Min wire diameter - 0.8
- Number of feed rollers - 2
- MMA Welding - yes
- TIG welding - yes
- Pulse welding mode - yes
- Water cooling is not included.
- Welding of aluminum - yes
- Digital display - yes
- Eurocat - D100/D200
- The presence of a network plug - yes
- The case is not
- Dimensions without packaging - 545x310x380 mm
- Net weight - 14.5 kg
- Max welding current MMA - 230 A
- Min welding current MMA - 50 A
- Max welding current MIG-MAG - 23 A
- Min welding current MIG-MAG - 50 A
- The presence of synergy - yes
- Burner length - 2 m
Characteristics Semi-automatic inverter welding machine MIG/MMA-230 DPP (220V) "BRIMA"
General Specifications
China
Russia
Dimensions of packaged product
Dimensions of product
Specifications
Defines the supported welding modes.
- MIG/MAG — classic semi-automatic machine (wire + gas)
- MMA — manual welding with a piece electrode
- TIG — argon arc welding with a non-melting electrode (for stainless steel and neat seams)
- FCAW — powder wire welding without cylinder
- Universal devices save space and allow you to solve a wide range of tasks with one device
Defines the supported welding modes.
- MIG/MAG — classic semi-automatic machine (wire + gas)
- MMA — manual welding with a piece electrode
- TIG — argon arc welding with a non-melting electrode (for stainless steel and neat seams)
- FCAW — powder wire welding without cylinder
- Universal devices save space and allow you to solve a wide range of tasks with one device
Indicates the degree of protection of the device body from penetration of solid objects and moisture.
-
IP21 provides protection against large particles and vertically falling droplets (suitable only for dry, indoor areas).
- IP23 means protection against oblique rain (splashes at an angle up to 60°), which allows safe operation of the device on open construction sites.
Indicates the degree of protection of the device body from penetration of solid objects and moisture.
-
IP21 provides protection against large particles and vertically falling droplets (suitable only for dry, indoor areas).
- IP23 means protection against oblique rain (splashes at an angle up to 60°), which allows safe operation of the device on open construction sites.
The voltage at the terminals is switched on before the arc is ignited. The higher this value (closer to 80-100 V), the easier and faster the initial ignition occurs, and the more stable the arc burns (especially on rusty metal or with base-coated electrodes). Low values are typical for devices with a safe voltage reduction system (VRD).
The voltage at the terminals is switched on before the arc is ignited. The higher this value (closer to 80-100 V), the easier and faster the initial ignition occurs, and the more stable the arc burns (especially on rusty metal or with base-coated electrodes). Low values are typical for devices with a safe voltage reduction system (VRD).
The minimum thickness of the supported wire. The use of 0.6–0.8 mm wire is critically important for car body repair and work with sheet metal (up to 1-1.5 mm), as this minimizes heat build-up and avoids burning of parts.
The minimum thickness of the supported wire. The use of 0.6–0.8 mm wire is critically important for car body repair and work with sheet metal (up to 1-1.5 mm), as this minimizes heat build-up and avoids burning of parts.
The maximum diameter of the welding wire for which the feeding mechanism is designed. Thick wire (from 1.2 mm and above) is used for high-performance welding of massive industrial metal structures, providing fast filling of the welding pool.
The maximum diameter of the welding wire for which the feeding mechanism is designed. Thick wire (from 1.2 mm and above) is used for high-performance welding of massive industrial metal structures, providing fast filling of the welding pool.
Maximum current for manual arc welding. Provides the ability to work with thick electrodes. The high current reserve allows the device to operate for a long time at medium currents without overheating.
Maximum current for manual arc welding. Provides the ability to work with thick electrodes. The high current reserve allows the device to operate for a long time at medium currents without overheating.
Minimum current strength for manual welding. It is important when using the thinnest electrodes (for welding elements 1-2 mm thick) and for maintaining a stable arc at low currents.
Minimum current strength for manual welding. It is important when using the thinnest electrodes (for welding elements 1-2 mm thick) and for maintaining a stable arc at low currents.
The lower threshold of current regulation. The minimum values (10-30 A) are necessary for jewelry work, restoration, welding of tinplate and automobile panels without the risk of their warping or formation of through holes.
The lower threshold of current regulation. The minimum values (10-30 A) are necessary for jewelry work, restoration, welding of tinplate and automobile panels without the risk of their warping or formation of through holes.
Maximum current in semi-automatic mode. It directly affects the maximum thickness of the metal being melted in one pass. 160-200 A is sufficient for household needs, and devices with a current of 300 to 500 A are required for welding heavy steel structures in production.
Maximum current in semi-automatic mode. It directly affects the maximum thickness of the metal being melted in one pass. 160-200 A is sufficient for household needs, and devices with a current of 300 to 500 A are required for welding heavy steel structures in production.
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
Reviews about Semi-automatic inverter welding machine MIG/MMA-230 DPP (220V) "BRIMA" ( 0 )