Diamond circle 11V9 D50-T30-H20-U10-X3 D46 C100 HY-T10
Russia
China
Description
Diamond grinding wheels of shape 11V9— cup wheels with a conical working surface (45° angle), designed for profile and flat grinding, sharpening and finishing tools made of hard alloys, ceramics and other hard-to-process materials.
Decoding the labeling and assigning parameters
- 11V9(according to GOST 24747): a cup circle with a 45° cone angle is optimal for sharpening on the front/back surface, processing chamfers, grooves and profile edges. The conical shape gives access to difficult areas without touching the body.
- D50–D125(outer diameter):
- D50–D75: compact circles for small parts, sharpening miniature tools, working on desktop sharpening machines.
- D100: Universal size for most tasks on industrial and semi-industrial machines.
- D125: Increased rigidity and service life, suitable for batch processing and heavier modes.
- T30–T40(total circle height):
- T30: Lightweight design, less inertia — convenient for delicate finishing.
- T35–T40: increased rigidity, better dampens vibrations during heavy shooting.
- H20, H31.75(mounting hole):
- H20: a common size for small and medium-sized machines.
- H31.75(1 ¼"): a specific size for the flanges of imported machines; requires precise alignment.
- U10, U3, S70(diamond bearing layer height):
- U10: standard layer — optimal balance of resource and precision.
- U3: a thin layer for finishing and fine profiles.
- S70: specific geometry (possibly a bevel or segment) for special tasks — check the manufacturer's catalog.
- X3, X10(Diamond bearing layer thickness):
- X3: thin layer for high precision and minimum machining width.
- X10: Extended service life, suitable for serial operation.
- J75(diameter of the support end): an element for precise installation and alignment on the flanges — important for minimizing runout.
- D20–D251(grain size according to FEPA):
- D20–D46: very fine grain — for finishing, polishing, obtaining a sharp edge without chips.
- D64–D91: universal grain — for finishing and easy finishing.
- D126: medium grain — for active removal while maintaining good surface cleanliness.
- D181–D251: coarse grain — for roughing and quick removal of allowances.
- C75–C125(diamond concentration):
- C75: Reduced concentration — better chip removal and less heating, suitable for viscous materials and delicate processing.
- C100: Standard — optimal balance of durability and cutting ability.
- C125: increased concentration — maximum life and durability, but higher risk of overheating in case of incorrect modes.
Differences between circles:
- In terms of grain size and concentration: there are options for all stages — from rough removal (D126 C75) to ultra-fine finishing (D20 C100). The C125 and coarse–grain (D64–D76) laps are designed for intensive work, and the fine—grain (D20-D46) laps are designed for finishing.
- According to the mounting hole: H20 and H31.75 — fit the flanges of your machine.
- According to the geometry of the diamond—bearing layer: U10/X3 — universal, U3/X10 - specialized (thin layer for precision or wide for resource).
- By bundle: different bundles (RB, HY, NB51, etc.) can be optimized for different materials and modes — for example, some work better with COOLANT, others allow short-term dry treatment.
- In diameter and height: D50–D75 for small jobs, D100 for most tasks, D125 for heavy duty.
What tasks are these circles suitable for?
- Sharpening and finishing of carbide tools: cutters, drills, cutters, reamers — the 11V9 conical shape is convenient for processing the front surface and chamfers.
- Profile grinding: grooves, radii, shaped edges — due to the 45° angle and precise geometry of the layer.
- Processing of hard and brittle materials: hard alloys, technical ceramics, glass, composites — the diamond layer effectively cuts without strong heating under the right conditions.
- Fine-tuning measuring and precision tools: where a sharp edge and minimal roughness are important.
Characteristics
General Specifications
China
Russia
Specifications
- Coarse grain ensures high cutting speed
- Fine grain is necessary for finishing without chipping
- It is selected according to the hardness of the material
- Coarse grain ensures high cutting speed
- Fine grain is necessary for finishing without chipping
- It is selected according to the hardness of the material
The size of the working part of the segment, which determines the resource of the tool.
- The higher the layer, the longer the disk will last
- Affects the cooling of the cutting area
- As you work, the layer is worn off
The size of the working part of the segment, which determines the resource of the tool.
- The higher the layer, the longer the disk will last
- Affects the cooling of the cutting area
- As you work, the layer is worn off
The transverse size of the cutting segment of the disc or crown.
- Affects the width of the cut
- Determines the strength of a segment under lateral loads
- Depends on the diameter of the disk
The transverse size of the cutting segment of the disc or crown.
- Affects the width of the cut
- Determines the strength of a segment under lateral loads
- Depends on the diameter of the disk
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
