Inverter semi-automatic welding machine AURORA PROGRESS 500 PULSE St
Russia
China
Description
The device is made in a decompact case with a removable feeding mechanism. The recommended type of wire coils is D200 and D300 (5-15kg). The powerful feeding mechanism is designed to work with burners up to 5 meters long. The trolley with a stand for the cylinder and the high layout of the device significantly facilitate the work of the welder.
The device is equipped with the ability to work in two settings: fully manual and synergetic. The PULSE drip transfer technology on the inverter is focused on working with black steel.
The PROGRESS series is an advanced IGBT inverter unit technology, excellent welding performance and superior control ergonomics. The welding arc control is provided by a modern microprocessor based on the ARM platform, which guarantees high-precision adjustment, control and stability of welding. The electronics of the inverter made it possible to achieve an increase in the feedback speed of the device. This means that the arc is monitored at a higher frequency and is better controlled at any given time.
An important feature of the device is the high performance PROGRESS 500 PULSE St. The current of the long-term load of the source at +40C is 420A. This means that at a given temperature and operating current, the device will not overheat and will not go into protection even during prolonged continuous operation.
The honest characteristics of the AURORA devices will help to cope with any welding task.
Characteristics Inverter semi-automatic welding machine AURORA PROGRESS 500 PULSE St
General Specifications
China
Russia
Specifications
The voltage at the terminals is switched on before the arc is ignited. The higher this value (closer to 80-100 V), the easier and faster the initial ignition occurs, and the more stable the arc burns (especially on rusty metal or with base-coated electrodes). Low values are typical for devices with a safe voltage reduction system (VRD).
The voltage at the terminals is switched on before the arc is ignited. The higher this value (closer to 80-100 V), the easier and faster the initial ignition occurs, and the more stable the arc burns (especially on rusty metal or with base-coated electrodes). Low values are typical for devices with a safe voltage reduction system (VRD).
The duration of activation (PV). This is the ratio of continuous operation time to cooling time in a 10-minute cycle. The value "200/40" means that at a current of 200 A, the device cooks for 4 minutes, and then cools down for 6 minutes. For intensive production and production lines, models with PV from 60% to 100% at operating currents should be selected.
The duration of activation (PV). This is the ratio of continuous operation time to cooling time in a 10-minute cycle. The value "200/40" means that at a current of 200 A, the device cooks for 4 minutes, and then cools down for 6 minutes. For intensive production and production lines, models with PV from 60% to 100% at operating currents should be selected.
The minimum thickness of the supported wire. The use of 0.6–0.8 mm wire is critically important for car body repair and work with sheet metal (up to 1-1.5 mm), as this minimizes heat build-up and avoids burning of parts.
The minimum thickness of the supported wire. The use of 0.6–0.8 mm wire is critically important for car body repair and work with sheet metal (up to 1-1.5 mm), as this minimizes heat build-up and avoids burning of parts.
The maximum diameter of the welding wire for which the feeding mechanism is designed. Thick wire (from 1.2 mm and above) is used for high-performance welding of massive industrial metal structures, providing fast filling of the welding pool.
The maximum diameter of the welding wire for which the feeding mechanism is designed. Thick wire (from 1.2 mm and above) is used for high-performance welding of massive industrial metal structures, providing fast filling of the welding pool.
The lower threshold of current regulation. The minimum values (10-30 A) are necessary for jewelry work, restoration, welding of tinplate and automobile panels without the risk of their warping or formation of through holes.
The lower threshold of current regulation. The minimum values (10-30 A) are necessary for jewelry work, restoration, welding of tinplate and automobile panels without the risk of their warping or formation of through holes.
Maximum current in semi-automatic mode. It directly affects the maximum thickness of the metal being melted in one pass. 160-200 A is sufficient for household needs, and devices with a current of 300 to 500 A are required for welding heavy steel structures in production.
Maximum current in semi-automatic mode. It directly affects the maximum thickness of the metal being melted in one pass. 160-200 A is sufficient for household needs, and devices with a current of 300 to 500 A are required for welding heavy steel structures in production.
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
Similar products
Buy with this product
Reviews about Inverter semi-automatic welding machine AURORA PROGRESS 500 PULSE St ( 0 )