Semi-automatic welding machine PTK MASTER MIG 200 DOUBLE PULSE SYNERGY D99-4
Russia
Russia
Description
PTK MASTER MIG 200 DOUBLE PULSE SYNERGY D99-4 is an updated model of semi—automatic machines with double pulse and synergetic control settings. The uniqueness of the model lies in the 4-roller welding wire feed mechanism. When using the pulse mode, the device welds stainless steels, aluminum alloys and sheet metal products with ease and special quality. And with the help of a 4-roller mechanism, the welding wire is fed more smoothly and evenly, which is especially important when welding aluminum.
Features:
- Metal 4-roller welding wire feed mechanism. This mechanism contributes to a more stable and uniform wire feed, without jerks. This has a direct impact on the quality of work when welding aluminum and sheet metal. A coil with a wire weighing 5 and 1 kg can be installed in the device. The device is supplied with installed 30x10x10 feed rollers for steel wire with a diameter of 0.8 - 1.0 mm.
- The synergetic control function allows you to select the optimal welding current parameters, while the welding voltage (arc length) is adjusted automatically. Additionally, the features of welding materials are taken into account – the diameter of the welding wire, the type and composition of the protective gas, the material to be welded.
- It is possible to disable synergetics and welding in the "Manual" mode, i.e. welding with manual process settings.
- In the DOUBLE PULSE MIG mode, adjustments of the base current, pulse frequency and pulse filling (duty cycle) are provided. In PULSE MIG mode (in 4T mode), there is also an adjustment of the crater welding current and the crater welding voltage. In 4TL mode, the starting current and voltage are adjusted, as well as the crater welding current and the crater welding voltage.
- In the MIG and PULSE MIG modes, there is a function of pre-purging and post-purging with gas to reduce the formation of defects and protect the welded product from oxidation.
- The Run In function facilitates arc ignition in MIG mode.
- In MIG mode, there is a hot start function for improved welding arc ignition.
- The settings provide an inductance adjustment to change the stiffness or softness of the arc.
- 2T/4T/4TL welding torch operating modes. 4TL is the burner mode when the welding current and welding voltage change according to the cyclogram.
- SPOT function for welding with dots or small potholders.
- Welding without gas with a powder wire.
- The device has memory slots for recording welding process settings.
- Additional function of argon arc welding in the environment of protective gases Lift TIG. Allows the use of tungsten electrodes with a diameter from 1.0 to 4.0 mm.
- Additional function of manual MMA arc welding. Allows the use of coated electrodes with a diameter from 1.5 to 5.0 mm.
- In the MMA mode, there is a functional of arc Force, Hot Start, electrode anti-sticking (Anti Stick) and no-load voltage reduction (VRD).
- 2 years service warranty.
Technical specifications:
- Supply voltage: 220±15% V.
- Power supply frequency: 50 Hz.
- Current consumption: 31 A.
- MIG current adjustment range: 40 - 200 A.
- MMA current adjustment range: 20 - 200 A.
- TIG current adjustment range: 10 - 200 A.
- MIG voltage adjustment range: 16 - 24 V.
- TIG voltage range: 10.4 - 18 V.
- MMA voltage range: 20.4 - 28 V.
- MIG power consumption: 6.6 kW.
- MMA power consumption: 7.7 kW.
- TIG power consumption: 4.9 kW.
- No-load voltage: 65 V.
- VRD idle voltage in MMA mode: 17 V.
- Gas pre-purge time: 0 - 20 sec.
- Gas post-purge time: 0 - 20 sec.
- SPOT time: 0 - 15 sec.
- Pulse frequency: 0 - 5.0 (5 - 250) Hz.
- Pulse duty cycle: 10-80%.
- Power factor: 0.73
- PV: 60%.
- EFFICIENCY: 85%.
- Type of feeding mechanism: Built
- -in welding wire feeding mechanism: 4-roller.
- Wire feed speed: 2 - 15 m/min.
- Diameter of MIG welding wire: 0.6 - 1.0mm.
- MMA electrode diameter: 1.5 - 5.0 mm.
- Diameter of the TIG electrode: 1.0 - 4.0 mm.
- Degree of insulation: F.
- Protection class: IP21.
- Power panel connectors: 35 - 50.
Equipment:
- Inverter semi-automatic welding machine - 1 pc.
- Semi-automatic burner MIG 15 series - 1 pc.
- Grounding terminal - 1 pc.
- Feed roller 30x22x10 U 0,8–1,0 - 2 pcs.
- Feed roller 30x22x10 V 0,8–1,0 - 2 pcs.
- TEFLON guide channel - 1 pc.
- Straight welding tip M6 d0.8 and 1.0 mm - 1 piece each.
- Welding tip M6 d0,8 and 1.0 mm - 1 piece each.
- Universal key - 1 pc.
- Instruction manual - 1 pc.
Characteristics
General Specifications
Russia
Russia
Dimensions of packaged product
Dimensions of product
Specifications
Defines the supported welding modes.
- MIG/MAG — classic semi-automatic machine (wire + gas)
- MMA — manual welding with a piece electrode
- TIG — argon arc welding with a non-melting electrode (for stainless steel and neat seams)
- FCAW — powder wire welding without cylinder
- Universal devices save space and allow you to solve a wide range of tasks with one device
Defines the supported welding modes.
- MIG/MAG — classic semi-automatic machine (wire + gas)
- MMA — manual welding with a piece electrode
- TIG — argon arc welding with a non-melting electrode (for stainless steel and neat seams)
- FCAW — powder wire welding without cylinder
- Universal devices save space and allow you to solve a wide range of tasks with one device
Indicates the degree of protection of the device body from penetration of solid objects and moisture.
-
IP21 provides protection against large particles and vertically falling droplets (suitable only for dry, indoor areas).
- IP23 means protection against oblique rain (splashes at an angle up to 60°), which allows safe operation of the device on open construction sites.
Indicates the degree of protection of the device body from penetration of solid objects and moisture.
-
IP21 provides protection against large particles and vertically falling droplets (suitable only for dry, indoor areas).
- IP23 means protection against oblique rain (splashes at an angle up to 60°), which allows safe operation of the device on open construction sites.
The voltage at the terminals is switched on before the arc is ignited. The higher this value (closer to 80-100 V), the easier and faster the initial ignition occurs, and the more stable the arc burns (especially on rusty metal or with base-coated electrodes). Low values are typical for devices with a safe voltage reduction system (VRD).
The voltage at the terminals is switched on before the arc is ignited. The higher this value (closer to 80-100 V), the easier and faster the initial ignition occurs, and the more stable the arc burns (especially on rusty metal or with base-coated electrodes). Low values are typical for devices with a safe voltage reduction system (VRD).
The minimum thickness of the supported wire. The use of 0.6–0.8 mm wire is critically important for car body repair and work with sheet metal (up to 1-1.5 mm), as this minimizes heat build-up and avoids burning of parts.
The minimum thickness of the supported wire. The use of 0.6–0.8 mm wire is critically important for car body repair and work with sheet metal (up to 1-1.5 mm), as this minimizes heat build-up and avoids burning of parts.
The maximum diameter of the welding wire for which the feeding mechanism is designed. Thick wire (from 1.2 mm and above) is used for high-performance welding of massive industrial metal structures, providing fast filling of the welding pool.
The maximum diameter of the welding wire for which the feeding mechanism is designed. Thick wire (from 1.2 mm and above) is used for high-performance welding of massive industrial metal structures, providing fast filling of the welding pool.
Maximum current for manual arc welding. Provides the ability to work with thick electrodes. The high current reserve allows the device to operate for a long time at medium currents without overheating.
Maximum current for manual arc welding. Provides the ability to work with thick electrodes. The high current reserve allows the device to operate for a long time at medium currents without overheating.
Minimum current strength for manual welding. It is important when using the thinnest electrodes (for welding elements 1-2 mm thick) and for maintaining a stable arc at low currents.
Minimum current strength for manual welding. It is important when using the thinnest electrodes (for welding elements 1-2 mm thick) and for maintaining a stable arc at low currents.
The lower threshold of current regulation. The minimum values (10-30 A) are necessary for jewelry work, restoration, welding of tinplate and automobile panels without the risk of their warping or formation of through holes.
The lower threshold of current regulation. The minimum values (10-30 A) are necessary for jewelry work, restoration, welding of tinplate and automobile panels without the risk of their warping or formation of through holes.
Maximum current in semi-automatic mode. It directly affects the maximum thickness of the metal being melted in one pass. 160-200 A is sufficient for household needs, and devices with a current of 300 to 500 A are required for welding heavy steel structures in production.
Maximum current in semi-automatic mode. It directly affects the maximum thickness of the metal being melted in one pass. 160-200 A is sufficient for household needs, and devices with a current of 300 to 500 A are required for welding heavy steel structures in production.
Lower current limit in TIG mode. Values from 5 A make it possible to weld capillary tubes, the thinnest foil, and repair miniature parts where the slightest overheating leads to edge destruction.
Lower current limit in TIG mode. Values from 5 A make it possible to weld capillary tubes, the thinnest foil, and repair miniature parts where the slightest overheating leads to edge destruction.
Peak power for argon arc welding. High current is required when working with heat-intensive parts (for example, massive aluminum or steel assemblies) in order to quickly form a welding bath.
Peak power for argon arc welding. High current is required when working with heat-intensive parts (for example, massive aluminum or steel assemblies) in order to quickly form a welding bath.
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
