Platinum contour profilometers from M.ERA: a new level of accuracy in industrial measurements.

Devices for measuring contour and roughness parameters combine the functions of a profilometer and a conturograph to assess the micro- and macrogeometry of the surface under study. To perform the measurement, an appropriate contour or roughness sensor must be installed.

Contour profilometers are widely used in the ball bearing industry, metalworking, automotive and aircraft industries.

Advantages of PLATINUM D1, D2, D3 contour profilometers

• Contour and roughness measurement on the same device using two different drives.
• Estimation of linear contour dimensions - distances, radii, angles, center-to-center distances, steps, and steps.
• Quick change of probes for roughness measurement.
• Magnetic mounting of the probe console for the contour.
• The possibility of manufacturing probes for any task.
• They are equipped with an ergonomic workstation.
• Save the latest settings to save time measuring the same type of parts.
• Output of the protocol with measurement results.
• Output of data in formats .txt, .xlsx, .csv, .ascii.

PLATINUM D1

Features of the model:

• A budget-friendly and easy-to-learn device.
• The measuring range of the roughness sensor is ± 420 microns.
• Motorized movement along the column without reference to coordinates.
• Measurement of the one-sided contour of the part from the outside or in the hole.
• It is equipped with a slide table and precision vise.
• Output of measurement results in PDF and Excel® format.

PLATINUM D2

Model features:

• Extended sensor measurement range up to ± 620 microns.
• Measurement of the one-sided contour of the part from the outside or in the hole.
• A ruler with coordinates for moving along the column.
• Improved drive straightness to reduce measurement error.
• Improved scale resolution of the drive and sensor.
• Automation of the movement and measurement process

	Column height: 320 mm, 420 mm, 520 mm or 620 mm Drive stroke: 100 mm, 120 mm, 150 mm, 160 mm, 180 mm, 200 mm or 220 mm Sensor measurement range: ± 30 mm, ± 25, ± 20, ± 15, ± 10 or ± 5 mm

PLATINUM D3

Features of the model:

• The measuring range of the roughness sensor is up to ± 620 microns.
• Measurements and analysis of diametrically arranged contours outside and in the hole, for example, the average diameter of the thread.
• The minimum measured inner diameter is 8 mm.
• The maximum measured inner diameter is 120 mm.
• The maximum measured outer diameter is 50 mm.
• The possibility of equipping with additional motorized axes for operation in the CNC mode.
• Advanced management and analysis software features.

Column height: 320 mm, 420 mm, 520 mm or 620 mm Drive stroke: 100 mm, 120 mm, 150 mm, 160 mm, 180 mm, 200 mm or 220 mm Sensor measurement range: ± 30 mm, ± 25, ± 20, ± 15, ± 10 or ± 5 mm

CASR software

Platinum series contour profilometers work with CASR software, which has the most comprehensive set of functions for contour and roughness analysis, including the ability to compare the measured contour with the nominal contour, as well as the ability to work with additional software modules such as "Bearing measurement", "Thread parameter measurement" with a full-fledged surface texture analysis.