New to Enex? Get 500 welcome bonuses when you sign up!
Sing in
0
Comparison
0
Order template
0
Cart

Micrometer MK-100 0.01 CHEESE

To order template
Remove from template
Compare
Remove from comparison
Micrometer MK-100 0.01 CHEESE
Manufacturer
CHEESE
Brand Country
Russia Russia
Country of origin
Russia Russia
Warrantee period
12 months
Weight, kg
0.58
Measuring range, mm
100
Division price, mm
0.01
Micrometer MK-100 0.01 CHEESE
Vendor code: 211763
Leave feedback
4 924 rub.
The price is set by the manufacturer.
Manufacturer CHEESE trades with VAT 20%
The price is valid for today, 20.05.2024.
+ 98 bonus rub. for purchase
Manufacturing time:
in stock
The total quantity of this product must be a multiple of the package size (1 pcs.)
The manufacturer has set a minimum order limit for this product
Add to cart
Delivery to the address:
Delivery to TC:
Pickup:
Payment:
by card or by account
Description

Description

The smooth micrometer of the MK-100 0.01 CHIP model is used in cases when it is necessary to measure the length or width of a part with high accuracy. With the help of this tool, measurements of external surfaces are made. The maximum length of the measured part is 100 mm, the permissible error does not exceed 0.01 mm. The manufacturer produces other models of micrometers for smaller and larger ranges and with greater accuracy. Products with the C index equipped with a digital block are available in the catalog. All CHIZ measuring instruments comply with the requirements set forth in GOST 6507-90. Smooth micrometers are equipped with a micrometer screw with a cylindrical metric scale to determine the required dimensions. The screw has a special design, thanks to which it reduces the load when the contact surface approaches the measured part. As a result, it is impossible to turn the screw with a greater load than is necessary for measuring. Therefore, there is no danger of deformation of the surface of the device and an increase in the measurement error. The body of the micrometer has the shape of the letter C. Measuring sponges made of hard alloy are installed at its ends. They do not wear out when in contact with the measured metal surface, so the accuracy of measurements is maintained throughout the entire service life. End length measures can be used for calibration. To protect against thermal deformation due to the heating of the housing from the heat of the human palm, there are thermal insulation pads made of a material with low thermal conductivity on the micrometer. This makes it possible to hold the instrument when taking measurements without gloves.
Characteristics

Characteristics

General Specifications

Manufacturer
CHEESE
Vendor code
211763
Country of origin
Russia
Brand Country
Russia
Warrantee period
12 months
Production time
Available from the manufacturer
Minimum order
1

Specifications

Measuring range, mm
100
Division price, mm
0.01
Reviews (0)
Reviews (0)
Terms of delivery

Terms of delivery

Who provides the delivery of goods?

On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.

What are the delivery methods?

You can choose any convenient way for you to receive an order:
  • Pickup from partner locations or from the manufacturer's warehouse

    If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge.
  • Delivery to the terminal by a transport company

    Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering.
  • Delivery to the door by courier of the transport company

    Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
You can find out the exact information about the delivery methods of your order when placing an order or by contacting us by phone 8 800 707-56-00 or email info@enex.market .

How can I keep track of the shipped product?

After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.

Payment methods

Payment methods

Payment by bank card online

You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.

To make a transaction, you will need:
  • your bank card number;
  • expiration date of your bank card;
  • CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
  • confirm the card transaction, for example, with a one-time password from an SMS.

Payment according to the invoice

On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.

In order for the order to be accepted, the invoice must be paid within 3 days.

Payment with bonuses

The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.

The seller's indication on the marketplace

Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.

Information about the supplier is always indicated when placing an order, as well as in the invoice (when paying by invoice) or in the receipt (when paying by card). The invoice contains the terms of delivery of the goods, which are accepted by the buyer when paying for it.

Read more about the rules of Sale and delivery
Return of the product

Return of goods

Is it possible to return the purchased product?

If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.

Rules for the sale of goods.

Return of goods of proper quality

For individuals

The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.

The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.

In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.

For legal entities

The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.

Return of goods of inadequate quality

For individuals

The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.

For legal entities

The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.

Distribution of responsibility

In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.

If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.

If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace. 

Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.

The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.

For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .

Full list of refund and exchange conditions

Micrometer MK-100 0.01 CHEESE
4 924 rub.
Micrometer MK-100 0.01 CHEESE
Micrometer MK-100 0.01 CHEESE
Leave feedback
Vendor code: 211763
4 924 rub.
+1 offer
from 6 204 rub.
The Chelyabinsk Tool Factory manufactures more than 1000 types of products for high-quality measurement of all types of threads, trouble -free operation of coupling systems of railway cars and other components, as well as measuring tools for all industries.
Exhibitor page at the Enex exhibition
Already 219585 products from 685 manufacturers
Selling tools directly from the manufacturer
Comparison of prices of producers and trading companies
Direct dialogue with the manufacturer on commercial and technical issues