Straight radial pneumatic grinding machine IP-20100 TORNERI T027592
Russia
China
Description
The IP-20100 straight radial pneumatic machine is designed for grinding, stripping, removing rust and burrs from metal parts. The radial layout is used when working with abrasive tooling, when surface treatment is required with the direction of the working action across the axis of the housing.
The tool is suitable for locksmith, repair and production operations on flat and profile areas, as well as for surface preparation before subsequent processing. The drive is powered by compressed air, so the selection takes into account the parameters of the pneumatic network, air quality and the possibility of convenient supply of the tool to the part.
The TORNERI model is 410 mm long and 55 mm wide. Before use, the compatibility of the working equipment, the reliability of its installation, the condition of the connections and the absence of foreign objects in the rotation zone are checked. The specific tooling is selected based on the operation performed and the material being processed.
Characteristics Straight radial pneumatic grinding machine IP-20100 TORNERI T027592
General Specifications
China
Russia
Specifications
The inlet air pressure at which the grinder outputs the nominal RPM. The standard is 6.2–6.3 bar.
If there is insufficient pressure, the speed drops: the disk begins to "get salty", and the processing speed decreases. Grinders consume a lot of air, so the compressor must maintain pressure during continuous operation.
The inlet air pressure at which the grinder outputs the nominal RPM. The standard is 6.2–6.3 bar.
If there is insufficient pressure, the speed drops: the disk begins to "get salty", and the processing speed decreases. Grinders consume a lot of air, so the compressor must maintain pressure during continuous operation.
The thread of the fitting for connecting the hose. The standard for pneumatic grinders is 1/4".
Grinders work continuously and consume a lot of air, so take a hose with an internal diameter of at least 8 mm and a length no longer than necessary, otherwise pressure will be lost on the long line and the speed will drop.
The thread of the fitting for connecting the hose. The standard for pneumatic grinders is 1/4".
Grinders work continuously and consume a lot of air, so take a hose with an internal diameter of at least 8 mm and a length no longer than necessary, otherwise pressure will be lost on the long line and the speed will drop.
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
Similar products
Buy with this product
Reviews about Straight radial pneumatic grinding machine IP-20100 TORNERI T027592 ( 0 )