FTP4 CAT5E 24AWG Cu RIPO Twisted Pair Cable(200m)
Russia
China
Description
Grey Twisted Pair FTP 4 CAT5E 24AWG Cu RIPO (indoor) 200 m long shielded copper cable with four pairs of conductors. All the individual wiring inside has its own braid. The veins are covered with a shell made of dense PE. It has different color codes according to the accepted standard. There is a single-layer protective shield under the shell. The cable is protected from stray currents and interference, reliably transmits the signal over long distances.
The FTP 4 CAT5E twisted pair is designed for mounting networks for various purposes: computer, video surveillance, access control systems, telephony, and others. Today, this wire is the main one for connecting wired local area networks. The product is in high demand among Internet service providers, as it provides good signal quality at a low cost. Twisted pair FTP is mainly used indoors.
Main features:
- Simultaneous use of four pairs allows for data transfer speeds of up to 100 Gbit/sec (1000 Mbit/sec).
- Color code of this cable according to GOST 28763 - GY (color gray)
- Single-core cable (solid)
- The common name is FTP (with a screen)
- The designation according to ISO/IEC 11801 - F/UTP (there is a common foil screen, there is no screen for pairs)
- Has high strength
- Category: 5e
- Bandwidth, MHz: 100
- Number of pairs: 4
- Conductor Material: Copper (Cu)
- Conductor Type: Single Core
- Conductor diameter, mm: 0.46 ± 0.01 mm
- Conductor insulation material: High density polyethylene (HDPE)
- Outer shell material: Polyvinyl Chloride (PVC)
- Application: For internal gaskets
- Shell Color: Grey
- Protective film: Polyester (PET)
- Breaking thread: Yes
- Common screen design: AL/PET/AL
- Running weight, kg/km: 20.6
- Bending radius during laying, D: At least 8
- Bending radius during operation, D: At least 4
- Tensile force, H: Not more than 80
- Maximum allowable voltage: 80 V
- Wave resistance, Ohms: 100±15
- Compliance with standards: Meets the requirements of the following standards: ISO/IEC 11801, EN 50173 and TIA/EIA-568
- "Supported applications: 10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, ATM-25, ATM-51, ATM-155, 100VG-AnyLAN, TR-4, TR-16 Active, TR-16 Passive"
- Length, m: 200
- Packaging: Individual - cardboard box / 2 packages in a common box
- Warranty: 1 year
The manufacturer reserves the right to change the appearance and characteristics of the product without reducing its consumer properties.
Electrical characteristics:
- The frequency range is up to 100 MHz.
- The electrical capacity of the pairs is not more than 56 nF/km.
- The resistance of the conductive core is not more than 96 ohms/km.
- The insulation resistance of the conductor is at least 5 GOm/km.
The wire is combined with the widely used 8P8C connector. When installing the cable, it is important not to bend it too much. If the bending radius is greater than 8 external bends of the cord itself, it will damage and fail faster. The unnatural position of the twisted pair also leads to a decrease in signal quality due to external interference.
During the installation process, experienced craftsmen check the integrity of the external cable shield and prevent it from bending. Strong tension can also damage the protection. In this case, there is a high probability that the wire will no longer be able to send a signal without interference. How long should the wire sheath be removed during installation? There are no strict requirements in this regard.
Characteristics FTP4 CAT5E 24AWG Cu RIPO Twisted Pair Cable(200m)
General Specifications
China
Russia
Dimensions of packaged product
Specifications
- 1 and 2 pairs are commonly used for telephone communication and legacy low-speed networks
- 4 pairs are the standard for building modern computer networks and connecting the Internet
- Multi-pair cables (from 10 to 24 pairs) are used for trunk lines and connection of server equipment
- Affects the bandwidth and maximum data transfer rate
- Determines the thickness of the cable and the complexity of the installation work
- 1 and 2 pairs are commonly used for telephone communication and legacy low-speed networks
- 4 pairs are the standard for building modern computer networks and connecting the Internet
- Multi-pair cables (from 10 to 24 pairs) are used for trunk lines and connection of server equipment
- Affects the bandwidth and maximum data transfer rate
- Determines the thickness of the cable and the complexity of the installation work
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
Reviews about FTP4 CAT5E 24AWG Cu RIPO Twisted Pair Cable(200m) ( 0 )