FTP4 CAT5E 24AWG Cu RIPO Cable(100m)
Russia
China
Description
FTP4 CAT5E 24 AWG– shielded, mono-core, copper, 4-pair, classified by category 5E. The conductive cores are insulated with a high-density polyethylene shell with color identification. There is a protective shield layer under the shell.
Application
It is used in telecommunication and computer networks, video surveillance systems (IP cameras), security and access control systems, telephony for digital signal transmission. Currently, it is the main element in the laying of wired local area networks.
It is mainly used indoors. It is used in almost all large wired networks. This is due to the fact that with its high-quality operation and stable signal transmission, it has a fairly low price, which allows many Internet service providers to connect their subscribers absolutely free of charge, without charging even for equipment.
This made such a cable (twisted pair FTP) the most used and popular material for organizing communication. It usually consists of eight veins twisted together in pairs. More precisely, inside the polyethylene braid of the cable, you can find four pairs of strands twisted together. At the same time, each individual wire is enclosed in its own polyethylene braid. It also has special protection against stray currents and other electromagnetic influences that can occur in electrical circuits and have a negative impact on communication conductors. That is why the FTP cable has twisted pairs.
The cable is easy to compress with a standard unified 8P8C connector with 8 pins for standard RJ45 connectors (8P8C) and RJ45 jack (8P8C) with a screen. Each bay has a length of 305 meters. The screen allows you to significantly reduce interference, so that the cable can transmit a high-speed signal over long distances.
Features
- Simultaneous use of four pairs allows you to develop an information transfer rate of up to 100Gbit/sec (1000Mbit/sec)
- Color code of this cable according to GOST 28763 - GY (color gray)
- Single-core cable (solid)
- The common name is FTP (with a screen)
- ISO/IEC 11801 - F/UTP designation (there is a common foil screen, there is no screen for pairs)
- Has high strength
- Category: 5e
- Bandwidth, MHz: 100
- Number of pairs: 4
- Conductor Material: Copper (Cu)
- Conductor Type: Single Core
- Conductor diameter, mm: 0.46 ± 0.01 mm
- Conductor insulation material: High density Polyethylene (HDPE)
- Outer shell material: Polyvinyl chloride (PVC)
- Application: For internal gaskets
- Shell Color: Grey
- Protective film: Polyester (PET)
- Breaking thread: Yes
- Common screen design: AL/PET/AL
- Running weight, kg/km: 20.6
- Bending radius during laying, D: At least 8
- Bending radius during operation, D: At least 4
- Tensile force, H: Not more than 80
- Maximum permissible voltage: 80 V
- Wave resistance, Ohms: 100±15
- Compliance with standards: Meets the requirements of the following standards: ISO/IEC 11801, EN 50173 and TIA/EIA-568
- "Supported Applications: 10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T
- ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive"
- Temperature ranges, With: Storage from -20 to +60. The gasket is from 0 to +50. Operation from -20 to +60
- Length, m: 305
- Packaging: Individual - cardboard box / 2 packages in a common box
- Warranty: 1 year
The manufacturer reserves the right to change the appearance and characteristics of the product without reducing its consumer properties.
Construction
- The conductor is a soft wire made of annealed electrolytic copper.
- The diameter of the conductor is 24AWG.
- The insulation thickness is 0.2 mm.
- The outer shell is polyvinyl chloride.
- The type of insulation is high–density polyethylene.
- The screen is aluminum, spirally wound with an overlap of 5mm.
- The total diameter of the cable is 5.4mm.
- The thickness of the outer shell is 0.4 mm.
- The gasket temperature is -5°C.. +50°C.
- The length of the wire on the bay is 100m.
Electrical characteristics
- The frequency range is up to 100 MHz.
- The electrical capacity of the pairs is no more than 56 nF/km.
- The resistance of the conductive core is no more than 96 ohms / km.
- The insulation resistance of the conductor is at least 5 GOm/km.
Installation features
The most important rule when installing a category 5e ftp cable is that the twisted pair must withstand the minimum and necessary permissible bending radius, which should be eight external diameters of the cable itself. If the bending becomes stronger, then this can lead to the fact that external interference to the signal may increase and the cable sheath may collapse. During the installation of a shielded twisted pair cable, it is recommended to carefully monitor the integrity of the screen located along the entire surface of the cable length.
With strong stretching or greater bending of the cable, the screen may collapse, which will lead to a decrease in resistance to interference, including electromagnetic interference. The drain wire must be connected to the connector screen. There are no specific requirements for the permissible maximum length of the twisted pair to which the cable sheath must be removed during installation.
There is an opinion that every installer, guided by his common sense, can remove the cable sheath himself for as long as the correct termination of cable pairs requires. But still, when solving the wiring of a twisted pair, it is necessary to take into account the above recommendations for the installation of a category 5e twisted pair FTP cable.
Characteristics
General Specifications
China
Russia
Specifications
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
