Industrial inverter semi-automatic welding machine AURORA RESOURCE 5000 DOUBLE PULSE + feed, trolley, water cooling. + NAKS certificate
Russia
China
Description
The device is supplied with a NAKS certificate!
The voluntary certification system of the National Welding Control Agency (NAKS) allows you to obtain a state-issued document that permits the use of welding equipment in hazardous production facilities (PTO, KO, GO, NGDO, OHNVP, SK, KSM). Work at such enterprises should be carried out exclusively by certified personnel using proven equipment and materials.
Power electronics, component base, cooling system – all elements of the RESOURCE devices ensure the fulfillment of the main task: uninterrupted daily operation in several shifts. The duration of the load at maximum current is 100%.
The DOUBLE PULSE resource is a competitor to modern professional European welding equipment. The device is designed for daily operation in industrial enterprises where there are high quality requirements for welding structures of any thickness.
All devices of the Resource line have an analog and digital interface and can be easily prepared to work with welding robots. The digital interface supports industrial communication standards DeviceNet, CAN, CANOPEN and others. Tested in working with FANUC, ABB, KUKA, Yaskawa and other robots.
AURORA engineers used gilding for resource management contacts. Gold-plated contacts are used in electrical engineering to ensure reliable and long-lasting operation of electrical connections. Due to its high conductivity, chemical stability and corrosion resistance, gold prevents oxidation and reduces contact resistance, which is especially important in conditions of high humidity, frequent heating and cooling cycles, as well as exposure to aggressive media.
THREE MIG/MAG SHORT CIRCUIT WELDING TECHNOLOGIES
1. MIG / Optimized semi-automatic MIG/MAG mode
Optimized classic MIG/MAG process. The electrode is transferred to the welding bath with a short circuit.
- Simple and stable mode
- Wide range of operating currents from minimum to maximum
- Wide range of materials and protective gases
- Aluminum welding and MIG soldering are possible in pure argon Ar100%.
2.LSC/LOW SPATTER CONTROL Welding without splashing Modified MIG/MAG mode with short circuit. At each stage of the short circuit, a short-term "shutdown" of the current occurs to gently detach and flow the electrode droplet into the welding bath. The process has minimal energy input.
- High quality of root suture formation
- Formation of reverse rollers during gap welding
- Formation of vertical seams with a large gap
- Low splash formation
- Effective for thin materials
3. PF / POWER FOCUS / Focused arc
An energetically powerful high-pressure plasma welding arc process. The focused arc and high energy make it possible to improve the formation of the weld. Even at low modes, when welding with a short circuit, the arc becomes very stable, concentrated, and there are no splashes.
- Deep melting
- High speed operation
- Stable arc even with large wire overhang
- Smaller cutting angle and welding of hard-to-reach corner seams
- Effective for medium and large thicknesses
THREE PULSE ELECTRODE DRIP TRANSFER TECHNOLOGIES:
1.PULSE / PULSE Technology
Controlled drip transfer of the electrode into the welding bath on a long arc without forming a short circuit. PULSE technology provides deep penetration and eliminates the formation of splashes.
- Reduced splashing, clean decorative seams
- Deep melting
- High quality aluminum welding
- High quality welding of various steels in gas mixtures
- Optimal transfer and formation of the seam at low, medium currents
- Efficient welding of large thicknesses in the lower position
2. DP / DUAL PULSE / Dual pulse
Welding is performed alternately with two different current values, each of which "works" in PULSE technology. Thus, the thermal effect on the metal is reduced and at the same time an attractive, uniform scale is formed.
- Better weld formation
- High decorative qualities
- Reduction of running energy and heat investment
- Working in difficult spatial positions
3. HS / HIGH SPEED PULSE / High SPEED pulse
PULSE technology with high welding speed. High transfer dynamics allows for deeper penetration, while reducing the thermal effect on the area around the weld and increasing the welding speed.
- Very stable arc
- No splashes
- Adaptation to the change in wire departure
- High speed
- Reduced heat input
Characteristics Industrial inverter semi-automatic welding machine AURORA RESOURCE 5000 DOUBLE PULSE + feed, trolley, water cooling. + NAKS certificate
General Specifications
China
Russia
Dimensions of product
Specifications
Indicates the degree of protection of the device body from penetration of solid objects and moisture.
-
IP21 provides protection against large particles and vertically falling droplets (suitable only for dry, indoor areas).
- IP23 means protection against oblique rain (splashes at an angle up to 60°), which allows safe operation of the device on open construction sites.
Indicates the degree of protection of the device body from penetration of solid objects and moisture.
-
IP21 provides protection against large particles and vertically falling droplets (suitable only for dry, indoor areas).
- IP23 means protection against oblique rain (splashes at an angle up to 60°), which allows safe operation of the device on open construction sites.
The voltage at the terminals is switched on before the arc is ignited. The higher this value (closer to 80-100 V), the easier and faster the initial ignition occurs, and the more stable the arc burns (especially on rusty metal or with base-coated electrodes). Low values are typical for devices with a safe voltage reduction system (VRD).
The voltage at the terminals is switched on before the arc is ignited. The higher this value (closer to 80-100 V), the easier and faster the initial ignition occurs, and the more stable the arc burns (especially on rusty metal or with base-coated electrodes). Low values are typical for devices with a safe voltage reduction system (VRD).
The duration of activation (PV). This is the ratio of continuous operation time to cooling time in a 10-minute cycle. The value "200/40" means that at a current of 200 A, the device cooks for 4 minutes, and then cools down for 6 minutes. For intensive production and production lines, models with PV from 60% to 100% at operating currents should be selected.
The duration of activation (PV). This is the ratio of continuous operation time to cooling time in a 10-minute cycle. The value "200/40" means that at a current of 200 A, the device cooks for 4 minutes, and then cools down for 6 minutes. For intensive production and production lines, models with PV from 60% to 100% at operating currents should be selected.
The minimum thickness of the supported wire. The use of 0.6–0.8 mm wire is critically important for car body repair and work with sheet metal (up to 1-1.5 mm), as this minimizes heat build-up and avoids burning of parts.
The minimum thickness of the supported wire. The use of 0.6–0.8 mm wire is critically important for car body repair and work with sheet metal (up to 1-1.5 mm), as this minimizes heat build-up and avoids burning of parts.
The maximum diameter of the welding wire for which the feeding mechanism is designed. Thick wire (from 1.2 mm and above) is used for high-performance welding of massive industrial metal structures, providing fast filling of the welding pool.
The maximum diameter of the welding wire for which the feeding mechanism is designed. Thick wire (from 1.2 mm and above) is used for high-performance welding of massive industrial metal structures, providing fast filling of the welding pool.
The lower threshold of current regulation. The minimum values (10-30 A) are necessary for jewelry work, restoration, welding of tinplate and automobile panels without the risk of their warping or formation of through holes.
The lower threshold of current regulation. The minimum values (10-30 A) are necessary for jewelry work, restoration, welding of tinplate and automobile panels without the risk of their warping or formation of through holes.
Maximum current in semi-automatic mode. It directly affects the maximum thickness of the metal being melted in one pass. 160-200 A is sufficient for household needs, and devices with a current of 300 to 500 A are required for welding heavy steel structures in production.
Maximum current in semi-automatic mode. It directly affects the maximum thickness of the metal being melted in one pass. 160-200 A is sufficient for household needs, and devices with a current of 300 to 500 A are required for welding heavy steel structures in production.
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
Similar products
Buy with this product
Reviews about Industrial inverter semi-automatic welding machine AURORA RESOURCE 5000 DOUBLE PULSE + feed, trolley, water cooling. + NAKS certificate ( 0 )