Cordless drill-screwdriver BORT BAB-16X (2x2Ah)
Germany
China
Description
Cordless drill-screwdriver BORT BAB-16X– It is a lightweight tool with a brushless motor designed for drilling and turning fasteners. The model weighs only 1 kg, which allows you to work with one hand without getting tired quickly. The tool comes complete with two batteries and a storage and carrying case.
What tasks is this screwdriver suitable for?
The BORT BAB-16X covers a wide range of household and construction tasks. It is a tool for solving specific everyday tasks where compactness, autonomy and strength are important.
Examples of use in real life:
- Furniture and home improvement:The assembly of cabinet and upholstered furniture (cabinets, dressers, beds). Installation of household products — cornices, shelves, mirrors, paintings and television brackets. Tightening of hinges, eccentric ties and handles without risk of tearing the thread.
- Construction and rough finishing:Fixing drywall and plywood, fixing corrugated board and siding. Unscrewing old self-tapping screws and screws. Roofing at height — the low weight of 1 kg plays a crucial role here.
- Country and garden chores:Assembling polycarbonate greenhouses and greenhouses, repairing fences or gates. Drilling holes in the boards for the beds, twisting long self-tapping screws into the logs.
- Repair work in the garage and workshop:Minor car repairs (replacement of cladding, mounting protection), bicycle maintenance, repair of garden equipment and wheelbarrows. Thanks to the two speeds, the tool can handle both the delicate tightening of plastic and the drilling of metal.
- Working with mortars:Mixing a small amount of building mixes (putty, tile adhesive, paint, lime) using a special mixer nozzle.
Key advantages of the BORT BAB-16X power drill
Low weight
The weight of the tool is 1 kg. The drill does not overload the brush when working for a long time at height, under the ceiling or in uncomfortable positions. The compact size makes it easy to place the tool in a bag or drawer. Lightness is especially important when working with an outstretched arm or in cramped spaces such as narrow niches or interior furniture cavities.
Brushless motor
A brushless motor is installed in the drill. The absence of carbon brushes eliminates their wear and sparking, increases the life of the motor and reduces energy loss. Unlike collector analogues, a brushless motor converts more electrical energy into mechanical work rather than heat, which provides a longer battery life. The engine life is 3-5 times higher than that of a classic brush motor.
Maximum torque 55 Nm
The 55 Nm torque allows you to wrap long self-tapping screws in dense wood without pre-drilling, drill holes up to 23 mm in diameter in wood and up to 10 mm in metal. This moment is enough for most household and semi-professional tasks: from assembling cabinet furniture to drilling steel corners and profile pipes.
Two speeds and 23+1 torque adjustment position
The first speed (0-450 rpm) is used for turning and unscrewing fasteners, working with large bits and drilling large diameter holes. The high torque at first speed allows you to work with dense materials without the risk of engine shutdown. The second speed (0-1500 rpm) is designed for drilling small holes in metal, wood and plastic. The coupling with 23 positions allows you to precisely dose the force when turning the screws, so as not to damage the material and not tear off the slot. Drilling mode (position 24) disables the torque limitation, which is necessary when drilling thick materials and using crowns.
Rotating ring
A rotating ring is located on the cartridge, around the place where the bit is installed. Upon contact with the surface, it does not scroll along with the cartridge, remaining in the same position, thereby not scratching or damaging the work area. The ring also distributes the load, reducing the likelihood of wear and damage to the thread, which extends the service life of the fastener.
Two 16.8V and 2 Ah batteries
The kit includes two lithium-ion batteries with a capacity of 2 Ah each. The 16.8 V voltage provides stable power throughout the entire discharge cycle. Two batteries allow you to work without pauses: while one is in use, the other is on charge. The charging time of one battery is 2 hours. Lithium-ion technology eliminates the memory effect and allows you to charge the battery at any time without the need for a full discharge.
Quick-release chuck (Keyless)
The cartridge allows you to change the equipment without additional keys. The drill bit or bits are clamped manually, which saves time with frequent nozzle changes. The quick-release design is especially convenient when working at height or in places where it is easy to drop the key.
Reverse and instant stop
The reverse changes the direction of rotation of the spindle to unscrew jammed drills and self-tapping screws. The instant stop stops the rotation immediately after releasing the start button, which increases safety and allows precise control of the process. The absence of inertial run-out is especially important when working with fragile materials and in places where positioning accuracy is important.
Spindle lock
The lock locks the spindle, which makes it easier to replace the tooling in the quick-release chuck. The spindle does not rotate when the chuck is tightened or loosened. This allows you to change drills and bits with one hand, which is convenient when working on stairs or in confined spaces.
Illumination of the work area
An LED backlight is built into the case. It turns on when the trigger is pressed and illuminates the place of drilling or wrapping. This is useful when working in dark corners, inside cabinets, under a table, in basements with insufficient lighting or when the electric lighting is turned off at the facility. The backlight does not cast shadows from the tool body, which increases drilling accuracy.
Charging indicator
The indicator on the case shows the battery charge level. This allows you to plan battery replacement in advance and avoid an unexpected stop in the middle of work. Visual charge monitoring is especially important when performing long-term operations, when stopping can lead to damage to the workpiece.
Equipment
The package includes: charger (1 pc), additional battery (1 pc), storage and carrying case (1 pc). Two batteries are included as standard, which allows you to immediately start working with backup power. The plastic case protects the drill, batteries and charger from shock, dust and moisture during transportation and storage. The internal compartments of the case are organized in such a way that each component has its own place, which eliminates accidental damage during carrying.
The benefit of the purchase
The model solves several tasks: it replaces a conventional drill for drilling, a screwdriver for furniture assembly and installation, as well as a tool for precise force metering when working with soft materials. Two batteries included ensure continuous operation without downtime for charging. The weight of 1 kg allows you to use the drill where a heavy tool is not applicable, and the brushless motor and a torque of 55 Nm make it a full-fledged tool for daily professional work.
Characteristics
General Specifications
China
Germany
Dimensions of packaged product
Specifications
- A nickel-cadmium battery (NiCd) is a type of rechargeable battery with electrodes made of nickel hydroxide and cadmium metal. Such batteries have a higher energy density than lead-acid batteries, better charge and discharge characteristics, and resistance to external influences.
- Lithium-ion battery (Li-ion) is the most common type of rechargeable batteries after lead-acid batteries according to world estimates in recent years. Intercalated lithium compounds are used as electrodes. Hence, there are many varieties of electrochemical systems in Li-ion from cobalt to titanate.They have the highest energy density, high specific power and low self-discharge rate during storage. There is no conventionally called "memory effect" (they do not need to be "trained", unless in case of problems with the display, it is calibrated, not the battery).
- Lead-acid battery is one of the oldest and most widely used types of rechargeable batteries. Electrodes made of lead dioxide and lead metal immersed in a sulfuric acid electrolyte. The main disadvantage is a short service life, a low energy—to-weight-to-volume ratio, you need to monitor the electrolyte and the condition of the plates, you can not discharge completely. But it is inexpensive to produce, an affordable price for the consumer. It works reliably for the prescribed (albeit short) period.Such batteries are used for car starters, uninterruptible power supplies and large-scale energy storage devices.
- A nickel-cadmium battery (NiCd) is a type of rechargeable battery with electrodes made of nickel hydroxide and cadmium metal. Such batteries have a higher energy density than lead-acid batteries, better charge and discharge characteristics, and resistance to external influences.
- Lithium-ion battery (Li-ion) is the most common type of rechargeable batteries after lead-acid batteries according to world estimates in recent years. Intercalated lithium compounds are used as electrodes. Hence, there are many varieties of electrochemical systems in Li-ion from cobalt to titanate.They have the highest energy density, high specific power and low self-discharge rate during storage. There is no conventionally called "memory effect" (they do not need to be "trained", unless in case of problems with the display, it is calibrated, not the battery).
- Lead-acid battery is one of the oldest and most widely used types of rechargeable batteries. Electrodes made of lead dioxide and lead metal immersed in a sulfuric acid electrolyte. The main disadvantage is a short service life, a low energy—to-weight-to-volume ratio, you need to monitor the electrolyte and the condition of the plates, you can not discharge completely. But it is inexpensive to produce, an affordable price for the consumer. It works reliably for the prescribed (albeit short) period.Such batteries are used for car starters, uninterruptible power supplies and large-scale energy storage devices.
- brush motors (collector motors) are equipped with two carbon brushes that supply electricity from the battery to the motor. During operation, friction occurs, heat is released, and energy is spent. Brushless motors (brushless) transmit electricity directly, creating a magnetic field. They have a minimum of moving parts and work without friction.
- brush motors (collector motors) are equipped with two carbon brushes that supply electricity from the battery to the motor. During operation, friction occurs, heat is released, and energy is spent. Brushless motors (brushless) transmit electricity directly, creating a magnetic field. They have a minimum of moving parts and work without friction.
The battery capacity is the maximum amount of electrical energy that is accumulated by a given battery or rechargeable battery in one complete charging cycle.
This value shows how long a battery device with a certain level of current consumption connected to this energy storage device will work during one discharge cycle.
The unit of measurement of electrical capacity is ampere-hour (A·h or A·h).The battery capacity is the maximum amount of electrical energy that is accumulated by a given battery or rechargeable battery in one complete charging cycle.
This value shows how long a battery device with a certain level of current consumption connected to this energy storage device will work during one discharge cycle.
The unit of measurement of electrical capacity is ampere-hour (A·h or A·h).Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
