AURORA Spektr 85 Plasma cutting machine COMPRESSOR
Russia
China
Description
Three-phase plasma cutting source with integrated compressor and MMA welding capability.
The owner of the Spektr 85 COMPRESSOR can choose a source of compressed air for cutting: a coaxial compressor built into the housing, or an external air source. When operating from a standard compressor, the device can handle cutting steel up to 30mm, and when connecting an external high-performance compressed air source up to 40mm. This feature sets the device apart from competitors and corresponds to much higher cutting current ratings of third-party sources.
The device is equipped with a special Leaf mode/Mesh, for working with metal of different textures. In the "Sheet" mode, when the burner reaches the edge of the product, the arc turns off. In the "Grid" mode, when contact with metal is lost, the plasma torch switches to low-current mode and within 5 seconds. waits for the end of the air gap for the next arc start.
The principle of tunnel cooling reduces the temperature inside the housing by 15%, compared to sources of traditional design. The efficiency of the inverter when operating from an external compressor is 60%. The continuous load current (PN100%), at which the device will not go into protection, even when operating at extreme temperatures (+40C) reaches 70A.
The control unit is isolated from the power unit. The control boards are covered with a compound layer that prevents the electronics from failing if moisture or conductive dust gets into the case. The ARM platform Spectrum 85 COMPRESSOR increases the quality and speed of signal processing. The two-module full-bridge power supply circuit based on IGBT transistors guarantees high reliability and a long service life of the source.
The standby arc of the device ensures a successful start of the process on any surface and in any spatial position. Two air valves of different capacities are mounted on the source for the standby and cutting arc.
The device is equipped with a system of stepwise increase of the cutting current. The processor incrementally increases the current from a small value of maintaining the pilot arc to the operating level set by the welder. As a result, the starting process becomes more stable, which is especially useful for thin and mesh materials. The load on the consumable parts of the plasma torch is also reduced, and their service life is extended.
The inverter can be retrofitted for industrial use: a power cable up to 80 m (subject to the correct selection of the core cross-section) and a plasma torch up to 20 m.
The Spectrum 85 COMPRESSOR is equipped with several types of protection: overcurrent, overheating, voltage drop, phase distortion, etc. In case of an emergency, the device will go into protection and display the error code on the scoreboard.
The source has passed a full cycle of production tests: exposure to low (-25C) and high (+55C) temperatures, high humidity and precipitation, overloads, 300 hours of continuous operation, vibration, multiple cycles of switching on and off the source, and even jammed compressor rotor failed to disable the device. At the end of the tests, the source remained operational.
MMA
The RDS welding mode is suitable for working with electrodes from 2.5 to 5mm in diameter. The current range is 70-250A. MON in MMA mode is 100%, at maximum current (250A) and +40C. The device is equipped with software Arc Boost and Antistick function.
Characteristics AURORA Spektr 85 Plasma cutting machine COMPRESSOR
General Specifications
China
Russia
Dimensions of product
Specifications
- IP21 — work only in a dry workshop;
- IP23 and IP23S — it is allowed to work outdoors and on the construction site in drizzling rain.
Plasma cutting generates a lot of metal dust, so choose a class of at least IP23 for work in metal warehouses and in billet shops.
- IP21 — work only in a dry workshop;
- IP23 and IP23S — it is allowed to work outdoors and on the construction site in drizzling rain.
Plasma cutting generates a lot of metal dust, so choose a class of at least IP23 for work in metal warehouses and in billet shops.
- Ease of ignition: The higher the voltage (in this case, from 210 to 430 V), the faster and more stable the plasma arc is ignited.
- Working with metal: A high value allows you to confidently break through a layer of paint, rust or dirt on the metal surface, ensuring a "clean" start.
- Cutting stability: Facilitates the re-ignition of the arc when transitioning between parts or on discontinuous surfaces.
- Ease of ignition: The higher the voltage (in this case, from 210 to 430 V), the faster and more stable the plasma arc is ignited.
- Working with metal: A high value allows you to confidently break through a layer of paint, rust or dirt on the metal surface, ensuring a "clean" start.
- Cutting stability: Facilitates the re-ignition of the arc when transitioning between parts or on discontinuous surfaces.
This parameter indicates the "endurance" of the device and its readiness for loads.
- The first number (A) is the current in Amperes at which the measurements were made.
- The second number (%) is PV (duration of activation). This is the percentage of time in a 10-minute cycle during which the machine can cut continuously without overheating.
How to understand this using the example of 100/60: At a maximum current of 100 A, the device can operate for 6 minutes out of 10, and it will take 4 minutes for cooling.
- A value of 100% means that the device can operate continuously (industrial grade).
- The higher the percentage at high current, the higher the performance and fewer pauses in operation.
This parameter indicates the "endurance" of the device and its readiness for loads.
- The first number (A) is the current in Amperes at which the measurements were made.
- The second number (%) is PV (duration of activation). This is the percentage of time in a 10-minute cycle during which the machine can cut continuously without overheating.
How to understand this using the example of 100/60: At a maximum current of 100 A, the device can operate for 6 minutes out of 10, and it will take 4 minutes for cooling.
- A value of 100% means that the device can operate continuously (industrial grade).
- The higher the percentage at high current, the higher the performance and fewer pauses in operation.
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
Similar products
Buy with this product
Reviews about AURORA Spektr 85 Plasma cutting machine COMPRESSOR ( 0 )