Guiding pilots of the STC58
Pilots are guide rods that are used in various industries such as mechanical engineering, metalworking and tool manufacturing.
- Pilots are used in various types of machine tools, including drilling, turning, milling and boring machines.
- They provide the exact direction of movement of the cutting tool or the workpiece, which allows you to obtain high-quality surfaces and increase work efficiency.
- Depending on the type of machine and the operations performed, pilots can have different shapes and sizes. For example, round pilots are used for drilling holes, and conical or stepped pilots are used for threading.
- When choosing pilots, it is necessary to take into account the material of the workpiece, the type of machine and the requirements for accuracy and quality of processing.
We produce guide pilots made of tungsten carbide for all types of cylinder head repair machines. Pilot guides are cylindrical (for Serdi, Newen machines), light-cone with a cone of 0.03 mm (for Rottler, Azz, Sunnen machines). You can also find pilot guides for Mira hand-held cars.
Cylindrical pilot guides
Cylindrical pilot guides are made of VK10 alloy (tungsten carbide with a cobalt content of 10%), have a hardness of 90...92 HRA on the Rackwell scale. With an accuracy of 0.002 microns along the entire length of the pilot. Cylindrical pilots are used on machine tools of companies: Serdi, Newen, SJMC, TendTool, as well as on Chinese, Turkish and Indian analogues.Available sizes: length 160 mm, Ø 4 - 14 mm; length 190 mm, Ø 4 - 14 mm;length 220 mm, Ø 6.94 - 14 mm.
 |
 |
 |
Cylindrical guide pilots Mira
The cylindrical guide rails of Mira pilots are made of VK10 alloy (tungsten carbide with a cobalt content of 10%), have a hardness of 90...92 HRA on the Rackwell scale. With an accuracy of 0.002 microns along the entire length of the pilot. Cylindrical pilots are designed for use on hand-held machines: Mira VGX-21, Mira HMX-2000, suitable for DT1, DT2, DT3 tool heads.
Available sizes: length 120 mm, Ø 4 - 14 mm; length 92 mm, Ø 4 - 6 mm.
 |
 |
Light-cone pilot guides
The light-cone pilot guides are made of VK10 alloy (tungsten carbide with a cobalt content of 10%), have a hardness of 90...92 HRA on the Rackwell scale. With an accuracy of 0.002 microns along the entire length of the pilot. Pilots are made with a cone of 0.03 mm to a length of 35 mm (it is possible to make any cone you need). Light-cone pilots are used on the machines of companies: Rottler, Azz, Comec, Micron, Robins as well as on Chinese, Turkish and Indian analogues.
Available sizes: length 190 mm, Ø 4 - 14 mm.
|
/span>
/span>