NEVA MB2 tillers

• Plowing
• Cultivation
• Furrow cutting
• Hoeing
• Row spacing weeding
• Planting potatoes

• Digging up potatoes
• Snow and garbage removal
• Mowing grass
• Cargo transportation
• Chopping wood
• Shredding branches
  

The Briggs&Stratton CR950 gasoline engine is a single-cylinder, four-stroke. The cast-iron sleeve increases the reliability and durability of the motor, preventing wear and compensating for the consequences of improper handling, while at the same time providing reduced oil consumption. The Lo-Tone ™ muffler guarantees low noise and good sound quality. The float carburetor provides optimal fuel supply for increased reliability and performance.

The Yamaha MX200 petrol engine meets high quality and safety standards. The key elements of the engine are made by forging and hardened by HDPE. Thanks to this, the engine can deservedly be called reliable and durable. The motor life of the engine is 3000 hours. The volume of the fuel tank is 3.9 liters .

The transmission of the NEVA MB2 motoblock is a gear-chain gearbox in an aluminum housing. The advantage of this gearbox is its high efficiency and durability. The gearbox provides the tillerblock with high torque and sufficient traction force. As a result, the machine perfectly handles all types of soils, as well as transports goods in difficult conditions of movement.

Initially, the NEVA MB2 motor unit has a set of reduced gears consisting of 2 forward and 1 reverse gears. However, if the belt is rearranged on two-hand pulleys, a set of increased gears becomes available, also including 2 forward and 1 reverse gears. Thus, the operator has 4 forward and 2 reverse gears in use. The applicability of each of these gears is determined by the type of operation performed, as well as the operating conditions. For example, plowing can be done on any of the front gears. However, preference will be given to the transmission that is more suitable for a particular type of soil.

The NEVA MB2 tillerblock has the function of disconnecting the left wheel. This function is especially useful when during plowing or cultivation you reach the end of the field and you need to turn the tillerblock 180 degrees to continue working. By pressing the wheel separation lever, you can easily make a turn even on a small area.

The gearshift lever in the NEVA MB2 motor unit is located on the gearbox. The design is characterized by reliability and durability. Transmissions are easily and silently switched on, gently and smoothly turned off. The lever is located at a convenient distance from the steering wheel, which allows you to quickly change gears.

For the convenience of the user, the steering handles in the NEVA MB2 motor unit have independent adjustment, which is especially important when cutting furrows. During this operation, the tillerblock tilts to the side, as one of its wheels goes along the furrow, and the second - on untreated soil. If the steering wheel is installed in the standard position, it is extremely inconvenient to work on the tillerblock. Therefore, an appropriate height is selected for each handle, convenient for the user.

The NEVA MB2 tillerblock is capable of working with a different number of cutters. Usually 4 or 6 cutters are installed on the machine, depending on the width of the treated area. In the case of processing light soil, it is possible to simultaneously install 8 cutters on the tillerblock, which allows you to process the site faster. To ensure safety during cultivation, it is mandatory to install flaps on the tillers.