SEVIRAL T300-S Thermal Ultrasound Camera
Russia
Russia
Description
The innovative SEVIRAL T300S IR camera is an innovative product that combines a thermal imaging camera and an ultrasonic flaw detector.
Using a thermal imaging camera, you can perform an IR examination for temperature anomalies. And with the latest ultrasonic detector, conduct an examination for leaks of air, gas, vacuum and other substances, but not only to detect the presence of a leak, but also to quantify it. In addition to leaks, energy specialists can assess the condition of electrical equipment for partial discharges.
Advantages
- The latest technology for combining a thermal imager and an ultrasound camera. Thanks to this combination, you can replace a whole set of diagnostic devices: a thermal imager, a gas analyzer, an ultrasonic flaw detector, a partial discharge detector – now it's one device!
- Highest performance Thanks to the 384x288 pixel IR detector, the camera has an IMIX function that allows you to get the most detailed images. Continuous focusing in three modes: automatic/manual and continuous makes the SEVIRAL T300S a fully automatic camera.
- Highest efficiency: Using the functionality of the SEVIRAL T300S camera, you can analyze the images you have taken. On the large 12-centimeter touchscreen, you can select the necessary areas, lines and points and find out all the information you need on temperature.
Optical data
- IR resolution 384x288 pixels
- Thermal sensitivity / (NETD) < 0.04 °C at 30 °C / <30 mK
- Field of view:
- Lens 24° - 24.6°x18.5°
- Lens 48° - 48.5°x35.5°
- Lens 12° - 12.3°x8.5°
- Lens 6° - 6.5°x 5.5°
- Minimum focusing distance
- The lens is 24° - 0.15 m.
- The lens is 48° - 0.15 m.
- The lens is 12° - 0.5 m.
- The lens is 6° - 2.0 m.
- Spatial Resolution (IFOV)
- The lens is 24° - 1.30 mrad.
- The lens is 48° - 2.26 mrad.
- The lens is 12° - 0.68 mrad.
- The lens is 6° - 0.34 mrad.
- Frame rate 30 Hz
- Focusing is Automatic / manual / Electric
- Identification of interchangeable lenses is automatic
- Digital zoom From 1 to 8x
- Availability of interchangeable lenses 48°, 12°, 6°
Information about the ultrasonic detector
- Functional features Detection of partial, corona discharges. Detection of substance leaks and their quantitative analysis
- Number of microphones 136 silicon microphones
- High frequency range 2 kHz-100 kHz
- Useful working distance 0.3 – 130 m (depending on the sound source)
- Sound intensity indicator Dynamic point
- The frequency of the sound image is 30 Hz
- Minimal detectable leakage
- 0.5 m, minimum detectable leakage 0.078 ml/s at 0.6 MPa
- 1 m, minimum detectable leakage of 0.122 ml/s at 0.5 MPa
- Sound intensity range
- Lower limit: -15 dB;
- Upper limit: 120 dB
- Partial discharge schedule Availability
- Microphone sampling rate 200 kHz
- Quantification of substance leakage Yes (support for multiple sound sources)
- Partial discharge type identification Yes (Particle discharge, suspension, surface discharge, particle discharge)
IR detector information
- Detector Type Uncooled Microbolometer
- Spectral range 7.5 – 14 microns
- The detector pitch is 17 nm.
Information about the display
- Display Type Color Touch LCD display
- Display brightness 400 cd/m2
- IPS Display Technology
- Sunlight Visual Glass Coating Technology
- Display resolutions are 1280x768 pixels
- Display size 5 inches / 12.6cm
- Built-in viewfinder, color with a resolution of 1024x768 pixels
Image Modes
- Image modes IR, Visible spectrum, picture in picture, IMIX*, Thermal mixing
- Ultra-high resolution mode is supported. Magnification of the image by 4 times
- Alarm mode Automatic sound and light alarms at a set temperature value (above/below)
Temperature measurement
- The measured temperature range is -20 °C to +2000 °C
- Setting the temperature range
- -20 °C to +150 °C
- From 0 °C to 410 °C
- From 300 °C to 2000 °C
- Temperature measurement error ±2°C or ±2%
Image Analysis
- Isotherm is lower or higher than the set temperature
- Emissivity correction is variable from 0.1 to 1.0
- Temperature analysis Maximum / Minimum / Central
- Custom settings For up to 10 custom points, up to 10 custom squares, 5 custom lines
- Distance correction Manual adjustment of the distance to the measured object
- Ambient temperature correction Variable from -270 °C to +300 °C
- Correction of ambient humidity from 0 to 100%
- Correction of weather conditions Changing the state of weather conditions: clear, cloudy, rain, fog, snow
- Wind speed correction Setting the required wind speed
- Load correction of electrical equipment Changes in voltage and current
Image Settings
- 10 color palettes (iron, rainbow, black and white, etc.)
System settings
- Command settings Time, Date, Language, units, Brightness
- Alarm Setting the temperature value, setting the parameter – lower / higher, alarm – light and sound
- Laser Laser pointer, Class 2
- Laser rangefinder Availability
- The range of the laser rangefinder is from 0.01 to 40 meters
- The accuracy of the laser rangefinder is ±1% of the measured distance
- Laser alignment The laser position is automatically displayed on the image
- GPS Built-in GPS, automatically add location information to the image
- Text comments The ability to create a text annotation for an image
- Voice comments The ability to create voice annotations to an image
- Automatic shutdown Availability
Data storage
- in the IR image format.jpg / .png (radiometric)
- H.264 video format (radiometric)
- The format of the image in the visible spectrum .jpg
Digital Camera
- The focus is Fixed
- The resolution of the digital camera is 5 MP
- Field of view 55°x42°
- Backlight Built-in LED flashlight
Data transfer interfaces
- Data transfer to PC Via USB
- Wi-Fi Real-time image transfer to mobile phone/computer via Wi-fi
- Bluetooth Support for recording and playback using Bluetooth headset
- HDMI The presence of a Micro HDMI output
- 4G Real-time wireless data transmission to mobile devices/computers via 4G
- Network input LAN slot for connection to the thermal imager
Memory capacity
- SD Card Type High-speed Micro SD Card
- 32 GB of memory (more than 10,000 infrared images)
Power supply system
- Battery Type Removable Lithium polymer battery
- Supply voltage 11.1 V
- Battery capacity is 2100 mAh
- The operating time of the thermal imager is at least 4 hours
- Charging Method Two-piece 12V charger
- Charging time is 2 hours
Environmental data
- Enclosure protection class IP54 (IEC 60529)
- Operating temperature range -20 °C to + 55 °C
- Storage temperature -40°C to 70°C
- Vibration resistance 2G (IEC 60068-2-6)
- Shock resistance 25G (IEC 60068-2-27)
- Drop resistance Safe fall from 2 meters
- Humidity (during operation and storage) <95%, non-condensing
Physical data
- Weight 1.48 kg.
- Dimensions 192x173x116 mm
- Color Black
- Material Plastic, Glass, Metal
- Tripod mount UNC ¼" -20
Guarantee
- Guarantee
- The basic warranty is 36 months from the date of commissioning
- 36 months warranty on the camera
- 36 months warranty on the battery
- 10 years on the IR detector
- Additional warranty The possibility of extending the warranty for up to 5 years
Delivery Information
- Packing type Cardboard box
- Package weight 5 kg
- Package dimensions 440x360x200 mm
- Country of manufacture Russian Federation
- Scope of delivery
- Thermal imaging camera – 1 piece
- Transportation shockproof plastic case – 1 piece
- Battery pack – 2 pieces
- Two–piece charger - 1 piece
- Power supply for the charger – 1 piece
- 32 GB SD card – 1 piece
- Card reader – 1 piece
- Micro HDMI cable – 1 piece
- USB cable – 1 piece
- User Manual – 1 piece
- Factory calibration certificate – 1 piece
- Technical data sheet – 1 piece
- Bluetooth headset – 1 piece
Thermal imaging data processing
- Software Free software of "SEVIRAL IR Research"
- Compatibility of Linux-based OS (Astra Linux) and Windows from version XP and above
- The number of simultaneous users is unlimited
Characteristics
General Specifications
Russia
Russia
Dimensions of packaged product
Dimensions of product
Specifications
- The first digit (from 0 to 6): Protection from dust and solid particles.
- The second digit (from 0 to 9): Protection from moisture and water.
- The first digit (from 0 to 6): Protection from dust and solid particles.
- The second digit (from 0 to 9): Protection from moisture and water.
Accuracy (or error) is the maximum allowable deviation of the measurement result from the actual temperature of the object. The smaller these numbers are, the more reliable the data you will receive.
- ±1°C / ±1% (High): Professional grade. It is necessary for energy audit, searching for microcracks in electronics and accurate scientific research. ±2°C / ±2% (Standard): The most common option. It is ideal for finding heat leaks in homes, checking the operation of underfloor heating and radiators.
- ±3°C and above (Basic): Budget models. They are suitable for household needs, when you just need to understand "hot or cold", without being tied to exact numbers.
Accuracy (or error) is the maximum allowable deviation of the measurement result from the actual temperature of the object. The smaller these numbers are, the more reliable the data you will receive.
- ±1°C / ±1% (High): Professional grade. It is necessary for energy audit, searching for microcracks in electronics and accurate scientific research. ±2°C / ±2% (Standard): The most common option. It is ideal for finding heat leaks in homes, checking the operation of underfloor heating and radiators.
- ±3°C and above (Basic): Budget models. They are suitable for household needs, when you just need to understand "hot or cold", without being tied to exact numbers.
- What it affects: When going beyond the specified limits (for example, in severe frost or in a hot workshop), the screen may start to "slow down", the battery will run out in a matter of minutes, and the measurement error will increase dramatically.
- For outdoor work in winter: Choose models with a lower threshold of -20°C or -30°C. Conventional appliances (from -10°C) can switch off at the most crucial moment.
- To inspect roofs in summer or industrial facilities: Pay attention to the upper limit (+50°C or +60°C), as the device body heats up in the sun or from the equipment.
- What it affects: When going beyond the specified limits (for example, in severe frost or in a hot workshop), the screen may start to "slow down", the battery will run out in a matter of minutes, and the measurement error will increase dramatically.
- For outdoor work in winter: Choose models with a lower threshold of -20°C or -30°C. Conventional appliances (from -10°C) can switch off at the most crucial moment.
- To inspect roofs in summer or industrial facilities: Pay attention to the upper limit (+50°C or +60°C), as the device body heats up in the sun or from the equipment.
Lower threshold:
- Usually -10...-20 °C: Important for finding heat leaks in winter, checking the quality of thermal insulation of walls and windows, and identifying "cold bridges" outside the building.
Upper threshold:
- Up to +120...+150 °C: Sufficient for checking heating systems, underfloor heating and finding blockages in radiators.
- Up to +300...+400 °C: Necessary for diagnostics of electrical panels, circuit breakers, loaded bearings and industrial equipment.
Lower threshold:
- Usually -10...-20 °C: Important for finding heat leaks in winter, checking the quality of thermal insulation of walls and windows, and identifying "cold bridges" outside the building.
Upper threshold:
- Up to +120...+150 °C: Sufficient for checking heating systems, underfloor heating and finding blockages in radiators.
- Up to +300...+400 °C: Necessary for diagnostics of electrical panels, circuit breakers, loaded bearings and industrial equipment.
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
