BELMASH EOS-91 edge grinding machine
Belarus
Belarus
Description
The BELMASH EOS-91 machine is designed for the final abrasive treatment of the surfaces of workpieces made of wood, wood materials and plastic using a moving sanding belt.
Structurally, it is a grinding unit with a drive and two work tables placed on the base. The tape unit has an adjustment of the angle of inclination from 0 to 90 degrees. Designed for connection to a 230 V network. There is a similar model BELMASH EOS-91/380 for connection to the 400 V power grid.
The tape is driven by a single-phase asynchronous motor with a power of 2200 watts. Its speed of movement is 16 m/s. The oscillation mechanism improves the quality of the grinding process. The oscillation amplitude is -12.5 mm. Therefore, with a belt width of 152 mm, the maximum processing height is 160 mm. The work tables are made of cast iron and have been milled, have height adjustment. A parallel guide or an angular stop can be installed in the groove of the main desktop. Therefore, it is possible to process not only the edges, but also the layer. The purpose of the small table is the grinding of workpieces with an internal radius of rounding up to 55 mm.
The rapid tension system allows you to quickly change or adjust the tape, eliminate "running away".
A special casing with a nozzle with a diameter of 100 mm is provided to connect to the exhaust units to the right of the grinding block.
The base of the machine deserves special attention. It is completely closed and has swing doors in the front. A shelf is installed inside, which allows you to use the space under the bed for storing accessories and tools.
Advantages of BELMASH EOS-91:
Oscillation mechanism
The oscillation mechanism improves the quality of the grinding process. The oscillation amplitude is -12.5 mm. Therefore, with a belt width of 152 mm, the maximum processing height is 160 mm.
Simple grinding of internal radii
An additional work table is provided on the machine, its purpose is to grind workpieces with an internal radius of rounding up to 55 mm.
Changing the position of the desktop by height
It is possible to change the position of the desktop in height, which is necessary for uniform wear of the tape over the entire width.
Adjusting the tape
The machine is equipped with a fast belt tension system, which allows you to quickly change it.
In addition, there is a screw next to the quick tension lever that regulates the position of the counter shaft, which eliminates the "escape" of the tape.
The slope of the grinding block
Thanks to the design of the grinding block, it is possible to adjust its angle of inclination from 0 to 90 degrees.
Roomy base - cabinet
The base of the machine is made in the form of a tool cabinet, which is excellent for storing consumables, tools and additional equipment.
Two cast iron tables
The work tables are made of high-quality cast iron, which increases the accuracy of material processing
- Package contents:Grinding machine assembly -
- 1Fasteners -
- 1Operation Manual -
- 1Hex key -
- 2Special key -
- 1Handle -
- 1Rack -
- 1Handles -
- 2Fasteners of the parallel guide -
- 2Grinding machine assembly -
- 1Fastening unit -
- 2Desktop bracket -
- 1Angular stop -
- 1Stop -
- 1Parallel guide -
- 1The nozzle of the dust collector -
- 1Working table (small) -
- 1Package -
2
- Specifications:
- Dimensions of the additional table, L×W - 300 × 250 mm
- The angle of inclination of the grinding belt assembly is 0-90 °
- The vibration amplitude of the sanding belt is 12.5 mm
Characteristics
General Specifications
Belarus
Belarus
Dimensions of packaged product
Dimensions of product
Specifications
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
