Composition of HS-500 GREY RAL 7001 (semi-finished product with hardener No. 5)
Description
Type:The compositions are two-component systems consisting of a semi-finished product of the composition and hardener No. 5 (TU 6-10-1093).
The semi-finished product of the composition HS-500 is a suspension of pigments in a solution of vinyl chloride copolymer with vinyl acetate in a mixture of organic solvents with the addition of epoxy resin, plasticizer and corrosion inhibitor.
The semi-finished product of the HS-500 K composition is a suspension of pigments in a solution of vinyl chloride copolymer with vinyl acetate in a mixture of organic solvents with the addition of epoxy resin, plasticizer, corrosion inhibitor and rust converter.
Scope of application:The compositions XC-500 and XC-500 K are designed to protect the external surfaces of equipment, metal, reinforced concrete structures and pipelines from corrosion in the industrial atmosphere of chemical industries exposed to aggressive gases and other chemical reagents having a temperature not exceeding 60 ° C as independent coatings, as well as for protection in complex multi-layer coating with weather-resistant enamels, varnishes of the type XC, XB, EP, ML, PF. The composition XC-500 K is designed for painting metal surfaces with remnants of tightly adhering rust (the thickness of the layer of corrosion products is up to 100 microns).
Surface preparation:Preparation of the surface of the product for painting with the composition of HS-500 is carried out in accordance with the requirements of the TNPA for the product, GOST 9.402 or STB ISO 12944-4.
Oil, grease, marking paint, dirt and other substances, such as mineral impurities, water-soluble salts, affecting the quality of surface preparation, must be removed from the metal surface. It is necessary to remove notches, burrs, welding splashes, round off sharp edges, corners, teeth and welding seams. Then the surface must be thoroughly cleaned of rust, scale and other contaminants, dust-free, degreased and dried. It is most carefully necessary to clean the surface in the area of welds up to 3 cm wide from the remnants of fluxes, alkaline slags and oxides formed during welding.
To improve the protective properties of the surface, it is recommended to pre-clean by sandblasting or shot blasting to the degree of purification from oxides 1-2 according to GOST 9.402. Painting should be done no later than 4 hours after surface preparation.
On welds, end edges and hard-to-reach places, the composition is applied with a brush in the form of a "strip layer" before painting.
Previously painted surfaces are cleaned of fragile layers of the old coating, the exfoliated old coating is removed, the entire surface is cleaned mechanically, dedusted, degreased and dried. If the type of old paintwork is not known, then it must be checked for compatibility (it is recommended to carry out a control staining of a small area of the surface). In case of swelling or peeling, the old coating must be removed.
Before applying the composition of HS-500 K, the metal surface must be cleaned of the old loose coating, dust, dirt, loose rust and scale, dust-free, degreased and dried.
To avoid condensation of moisture, the temperature of the painted surface must be at least 3 °C above the dew point temperature.
Painting is not allowed during precipitation, as well as on wet and icy surfaces.
Reinforced concrete surfaces should be clean, dry, durable, without cracks, loose areas, dust and dirt. If necessary, reinforced concrete surfaces are cleaned dry (with brushes) and dedusted.
Application:Before use, semi-finished formulations are thoroughly mixed, 2.6 mass parts of hardener No. 5 (TU 6-10-1093) are added to 100 mass parts of semi-finished formulations, then the formulations are thoroughly mixed, diluted with solvent P-4 or P-4A
(GOST 7827) in an amount of 10 - 60% of the mass of the compositions and applied by pneumatic spraying. When applied with a roller or brush, the compositions are not diluted.
The consumer independently selects the working viscosity depending on the production conditions (ambient temperature in the room, the diameter of the spray nozzle, the working pressure of compressed air and other factors).
In case of storage at low temperatures, the primer-enamel is kept in a warm room before application (to avoid condensation of moisture on the surface to be painted during painting).
To obtain an independent coating, the compositions are applied in 4-5 layers with intermediate drying at a temperature of (20 ± 2) ° C for 10-15 minutes and final drying at a temperature of (70 ± 2) ° C for 3 hours or at a temperature of (20 ± 2) ° C for 24 hours and relative humidity (65 ± 5) %.
The compositions used in the complex coating as a primer layer (under enamels and varnishes of the type XC, XB, EP, ML, PF) are applied in 1-2 layers. When applying two layers of compositions, the interlayer drying is 10-15 minutes at a temperature of (20 ± 2) ° C. Final drying of the coating at a temperature of (70 ± 2) ° C for 3 hours or at (20 ± 2) ° C for 24 hours and relative humidity (65 ± 5)%.
The exposure time of the coating before use is at least 7 days.
The thickness of the single-layer coating should be at least 25 microns. In the case of surface cleaning by sandblasting or shot blasting, the coating thickness should be increased taking into account the degree of surface roughness Ra (GOST 2789).
The consumptionof compositions for a single-layer coating is 130-160 g/m2, without taking into account the complexity of the surface to be painted, the method of application, color, personnel qualifications and other factors.
Storage: Semi-finished formulations should be stored at a temperature not exceeding 30 ° C, in a tightly closed container, protecting from moisture and direct sunlight. Keep away from fire. After using the formulations and hardener No. 5 for its intended purpose, the container with product residues should be tightly closed with capping agents and sent to a household landfill.
Precautions:During the painting works, as well as after their completion, it is necessary to thoroughly ventilate the room. Persons involved in the painting work must be provided with personal protective equipment (overalls, goggles and rubber gloves).
Work with hardener No. 5 is carried out in rubber gloves, overalls and protective glasses, as well as in a well-ventilated room. In case of contact with the skin, hardener No. 5 is washed off with plenty of soap and water. The dried coating does not have a toxic effect on the environment and the human body.
Characteristics
General Specifications
Dimensions of packaged product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .