New to Enex? Get 500 welcome bonuses when you sign up!
Sing in
0
Comparison
0
Order template
0
Cart

Downhole pump VORTEX CH-60

To order template
Remove from template
Compare
Remove from comparison
Downhole pump VORTEX CH-60
Downhole pump VORTEX CH-60
Downhole pump VORTEX CH-60
Downhole pump VORTEX CH-60
Downhole pump VORTEX CH-60
Downhole pump VORTEX CH-60
Downhole pump VORTEX CH-60
Downhole pump VORTEX CH-60
Downhole pump VORTEX CH-60
Downhole pump VORTEX CH-60
Manufacturer
The Vortex
Brand Country
Russia Russia
Country of origin
China China
Warrantee period
12 months
Power, W
800
Voltage, V
220
Maximum capacity, l/h
3000
Maximum feed height, m
60
Cable length, m
20
Downhole pump VORTEX CH-60
Vendor code: 68/3/7
Leave feedback
11 390 rub.
The price is set by the manufacturer.
Manufacturer The Vortex trades with VAT 20%
The price is valid for today, 05.11.2024.
+ 228 bonus rub. for purchase
To be requested to manufacturer
Request
Description

Description

The Vortex CH-60 centrifugal downhole pump will provide water supply from a depth of up to 50 m from an artesian well, a mine well.

The device is characterized by design features typical for pumping equipment of this type. Inside the stainless steel housing there is an 800 Watt electric motor and a block with impellers made of durable plastic. The fence is made in the middle: between this unit and the motor. The downhole pump has a high capacity of up to 50 l/min. It can provide water rise to a height of up to 60 m, while admixtures of sand are allowed in it, the content of which can reach 180 g/m3. The temperature of the pumped liquid should not exceed +35 degrees. The protection class of this device is IPX8: it can operate for a long time when fully submerged without the risk of damage. The model has thermal protection, which is triggered when the source dries out or the unit is overloaded. The thermal relay turns off the engine to avoid possible failure.

The reliable, high-quality, effective Vortex CH-60 model is useful in the country and in other places where it is necessary to provide an autonomous water supply.

Characteristics

Characteristics

General Specifications

Manufacturer
The Vortex
Vendor code
68/3/7
Country of origin
China
Brand Country
Russia
Warrantee period
12 months
Minimum order
1

Dimensions of packaged product

The length of the packed goods, mm
1150
Height of the packed goods, mm
90
Width of the packed goods, mm
195

Specifications

Power, W
800
Voltage, V
220
Cable length, m
20
Protection class
IPX8
Maximum capacity, l/h
3000
Maximum feed height, m
60
Material of manufacture
stainless steel
Maximum diving depth, m
50
Pump diameter, mm
75
Weight,
11.55
Diameter of the outlet, inch
1

Additional characteristics

Frequency, Hz
50
The maximum temperature of the water used, °C
35
Barcode
4606059019244
Reviews (0)
Reviews (0)
Terms of delivery

Terms of delivery

Who provides the delivery of goods?

On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.

What are the delivery methods?

You can choose any convenient way for you to receive an order:
  • Pickup from partner locations or from the manufacturer's warehouse

    If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge.
  • Delivery to the terminal by a transport company

    Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering.
  • Delivery to the door by courier of the transport company

    Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
You can find out the exact information about the delivery methods of your order when placing an order or by contacting us by phone 8 800 707-56-00 or email info@enex.market .

How can I keep track of the shipped product?

After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.

Payment methods

Payment methods

Payment by bank card online

You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.

To make a transaction, you will need:
  • your bank card number;
  • expiration date of your bank card;
  • CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
  • confirm the card transaction, for example, with a one-time password from an SMS.

Payment according to the invoice

On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.

In order for the order to be accepted, the invoice must be paid within 3 days.

Payment with bonuses

The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.

The seller's indication on the marketplace

Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.

Information about the supplier is always indicated when placing an order, as well as in the invoice (when paying by invoice) or in the receipt (when paying by card). The invoice contains the terms of delivery of the goods, which are accepted by the buyer when paying for it.

Read more about the rules of Sale and delivery
Return of the product

Return of goods

Is it possible to return the purchased product?

If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.

Rules for the sale of goods.

Return of goods of proper quality

For individuals

The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.

The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.

In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.

For legal entities

The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.

Return of goods of inadequate quality

For individuals

The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.

For legal entities

The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.

Distribution of responsibility

In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.

If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.

If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace. 

Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.

The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.

For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .

Full list of refund and exchange conditions

Downhole pump VORTEX CH-60
11 390 rub.
Downhole pump VORTEX CH-60
Downhole pump VORTEX CH-60
Leave feedback
Vendor code: 68/3/7
11 390 rub.
+1 offer
from 11 390 rub.
Vikhr is a leading Russian brand of pumping equipment and power tools. Historically, pumping stations, borehole, drainage, and surface pumps have been the main line of production.
Exhibitor page at the Enex exhibition
Already 240015 products from 777 manufacturers
Selling tools directly from the manufacturer
Comparison of prices of producers and trading companies
Direct dialogue with the manufacturer on commercial and technical issues