Battery cleaning machine with operator's seat UNICA 100, with Gel 240 Ah battery
Italy
Italy
Description
Purpose and resource.An industrial scrubber with a place for an operator, designed for long—term operation in harsh conditions, is a real proven service life in Russiafor more than 20 years. Designed for general and maintenance cleaning of floors with various types of hard surfaces in indoor areas at temperaturesfrom +5 to +35 °C.
Configurations of the brush assembly.The machine can be produced withdisc brush unitsor ina cylindrical design(with a pre-sweeping function). In the disk version, the basic working area is1000 mmdue to two disk units2×Ø500 mm; with a cylindrical configuration, a sweeping and suction device is availablethat allows you to collect garbage and clean the floorin one passwithout prior manual cleaning.
Performance and speed.The nominal area capacity isup to 6000 m2/hour. Operating speed —0-8 km/h(in some certified deliveries, there is a limitto 0-5 km/h; the actual value depends on the selected control configuration and the conditions of the facility).
Water supply and drainage system.Separate high-capacity tanks —225 litersfor clean water and225 litersfor dirty — provide long-term autonomous operation without frequent stops. The supply of detergent solution to the brush assemblyis regulated by an electromagnetic valvewith a fine filter, which eliminates clogging of the paths and stabilizes the consumption of chemicals. The solution is collected and dischargedby a suction beam with a width of 1150 mm;electronic lifting/lowering controlandautomatic lifting of the beam when reversingare provided to protect the blades and prevent air intake.
Running gear and stability.The chassis design is focused on stable operation on uneven and mixed surfaces.The front twin wheelincreases stability on undulating floors, whilethe rear-wheel driveensures confident movement and operation on slopes and ramps. Maneuverability and a small turning radius make it possible to effectively handle areas along walls and in cramped passages.
Power supply and autonomy.Food —36 In. It is allowed to install batteries with increased capacity in the range of240-450 Ah(the type is selected for the operating mode), which ensures long-term operation without recharging. It can be equipped with lead-acid (including gel) or lithium batteries, depending on the requirements for charge cycling and available infrastructure.The chargeris included in the delivery.
Service availability and security.The machine is designed for fast routine maintenance: the design providesconvenient access to the battery, components and assemblies, speeding up daily and periodic maintenance operations. On board there isan electronic control system for lifting/lowering the beamanda status indicatorinforming about malfunctions. The safety system blocks operator errors and prevents damage to components when maneuvering in reverse.
Dimensions and weight.The compact dimensions of the case simplify transportation and operation in narrow corridors:length 1680 mm, width 1050 mm, height 1450 mm.. The weight of the car in running order with batteries isabout 600 kg.(individual specifications specify a limit valueof up to 620 kg).
Key technical parameters (integrated):
- working width1000 mm(disk configuration2×Ø500 mm),
- suction beam1150 mm,
- tanks225/225 l,
- capacityup to 6000 m2/h,
- power supply36 V(BATTERY240-450 Ah),
- operating speed0-8 km/h,
- weight with battery≈ 600 kg,
- dimensions1680×1050×1450 mm.
Basic equipment.Two nylon disc brush assemblies2×Ø500 mm, suction beam1150 mm, battery pack36 V(according to the selected capacity),a charger, a set of service accessories for daily maintenance.
Options.
- Sweeping and suction device(for the disc version) with a cylindrical brush — for complex cleaning "sweeping + washing" in one pass.
- Choosing the type of battery (with liquid electrolyte, gel, lithium) with the required capacity and the appropriate storage.
- Brush assemblies of different stiffness, pad holders and consumables for the task of the object.
UNICA 100-N1— it is a balanced industrial platform with a long lifecycle, high autonomy and sustainable performance. Large tanks225/225 L, working area1000 mm(2×Ø500 mm), real productivityup to 6000 m2/h, power supply36 Vwith a battery capacity of upto 450 Ah, as well as structures that increase the stability and security of components (dual front wheel, rear-wheel drive, auto-lifting of the beam during reverse), make the model the optimal choice for large facilities with intensive operation and strict requirements for cleaning quality.
Characteristics
General Specifications
Italy
Italy
Dimensions of packaged product
Dimensions of product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
