Digital multimeter DT-9928T CEM (State Register of the Russian Federation)
China
China
Description
DT-9928T Digital Multimeter
Opportunities:
- True RMS measurements
- IP67 safe design
- Setting the zero
- Holding the maximum/minimum/current values
- Peak Detector
Technical Specifications:
- Insulation: Class 2, Double insulation.
- Overvoltage category: CATIV 600V,CATIII 1000V
- Maximum voltage between terminal and ground: 1000V DC/AC RMS
- Display: 11,000-unit LCD
- Polarity: Automatic, (-) negative polarity indication.
- Exceeding the range: the "OL” icon
- Low battery indication
- Measurement frequency: 4 times per second.
- Auto power off after 15 minutes in standby mode
- Safety: The device complies with IEC/EN 61010-1:2001-02 and IEC/EN 61010-031:2002
- Constant voltage: Measurement limits 600 mV; 6, 60, 600, 1000 V; Error ± (0.09 % + 2 emr); Max. resolution 0.1 mV; Vx. Resistance 7.8 mOhm; Input protection 1000 V
- AC voltage: Measurement limits 600 mV; 6, 60, 600, 1000 V; Error ± (0.8 % ± 3 nm); Max. resolution 0.1 mV; Frequency band 50 – 400 Hz; High. Resistance 7.8 mOhm; Input protection 1000 V
- Direct current: Measurement limits 600 Ma; 6, 60, 600 mA; 10 A; Error ± (1 % ± 3 nm); Max. resolution 0.01 Ma; Input protection; Fuse 0.5 A/1000 V (input "mA"); 10 A/1000 V (input "A")
- Alternating current: Measurement limits 600 Ma; 6, 60, 600 mA; 10 A; Error ± (1.5 % ± 5 nm); Max. resolution 0.01 Ma; Frequency band 50 – 400 Hz; Input protection; Fuse 0.5 A/1000 V (input "mA"); 10 A/1000V (input "A")
- Resistance: Measurement limits 600 ohms; 6, 60, 600 kOhms; 6, 60 mOhm; Error ± (0.3% ± 4 nm); Max. resolution 1 pF; Input protection 1000 V
- Capacity: Measurement limits 11, 110, 1100 nF; 11; 110, 1100 UF; Error ± (3% ± 5 nm); Max. resolution 1 pF; Input protection 600 V
- Frequency: Measurement limits 10, 100, 1000 Hz; 10, 100, 1000 kHz; 10 MHz; Error ± (0.1% + 1 EMR); Max. resolution 0.001 Hz; Input protection 600 V
- Pulse filling factor: Measuring range 0.1 – 99.9%; Error ± (1.2% ± 2 nm); Max. resolution 0.1%; Input protection 600 V
- Temperature: Measuring range -20°C ~ 760°C; Error ± (3% ± 3 E.M.R.); Max. resolution 1°C; Input protection 600 V
- The P-N test: Max. test current 0.3 mA; Test voltage 1 mV; Input protection 600 V
- Circuit ringing: Trigger threshold < 150 ohms; Test current < 0.3 mA; Input protection 600 V
General information:
- Measurement of C.K. in the values of an arbitrary waveform
- Peak detector signal duration > 1 ms
- Max. The displayed number is 11000
- 21 mm Liquid crystal display with backlight
- Power Supply: One 9V battery, NEDA 1604, IEC 6F22.
Characteristics
General Specifications
China
China
Dimensions of packaged product
Dimensions of product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
