Multifunctional Thermal Imaging Camera 4 in 1 SEVIRAL ATS600
Russia
Russia
Description
The SEVIRAL ATS series is a modern line of combined thermal imaging cameras. In addition to IR diagnostics, thermal imaging cameras of this line can monitor partial discharges, and most importantly, this is an ultrasonic remote method.
Simultaneous detection of equipment malfunctions has never been easier and more reliable.
Advantages
- Reliability and versatility. The ATS series has a solid construction, light weight and can withstand a fall from a height of 2 meters.
- Large buttons, an informative touchscreen with a clear and friendly interface.
- The optimal price-quality ratio. The equipment has high performance, with an IR resolution of 640x512 pixels, convenient operation and ergonomics at an affordable price.
Optical data
- The IR resolution is 640x512 pixels
- Thermal sensitivity / (NETD) < 0.04 °C at 30 °C / <40 mK
- Field of view:
- Lens 24° - 24.6°x18.5°
- Lens 48° - 48.5°x35.5°
- Lens 12° - 12.3°x8.5°
- Lens 6° - 6.5°x 5.5°
- Minimum focusing distance
- The lens is 24° - 0.15 m.
- The lens is 48° - 0.15 m.
- The lens is 12° - 0.5 m.
- The lens is 6° - 1.0 m.
- Spatial Resolution (IFOV)
- The lens is 24° - 0.66 mrad.
- The lens is 48° - 1.39 mrad.
- The lens is 12° - 0.33 mrad.
- The lens is 6° - 0.16 mrad.
- Frame rate 30 Hz
- Manual Focus
- The identification of interchangeable lenses is automatic
- Digital zoom From 1 to 10x
- Availability of interchangeable lenses 48°, 12°, 6°
Information about the IR detector
- Detector Type Uncooled Microbolometer
- Spectral range 7.5 – 14 microns
- The detector pitch is 12 nm.
Acoustic characteristics
- Number and type of microphones 136-channel digital silicon microphone array
- Frequency range 2kHz~100kHz
- Anomaly detection distance 0.3-130m (Depends on the signal level of the sound source)
- Pseudo-color audio and video mode White on black, black on white, rainbow, iron red, merge, rain, etc
- . Sound intensity display is the highest point
- Acoustic detection mode Gas leak detection mode, partial discharge detection mode
- The audio and video frequency is 25 Hz
- Minimal leakage
- Min. detectedleakage 0.078 ml/s at 0.5 m, 0.6 MPa;
- Min. detected leakage of 0.122 ml/s at 1 m, 0.5 MPa
- Sound intensity range
- Lower limit: <-15dB;
- Upper limit: >120dB
- Microphone sampling rate is supported
- Sound sampling rate 200kHz
- The display of loss in case of gas leakage is supported
- Gas leak indicator On the device screen
- The gas leak level indicator is dynamic
- Partial discharge type identification End discharge, stopped, surface and partial
- The acoustic measurement function Supports multiple sound sources
- Information about the Partial Discharge Detector (CR)
- Partial discharge detection methods AA (ultrasonic) and TEV (ground voltage transient method)
Characteristics of the AA sensor
- The range of detectable frequencies is 40±1kHz
- Dynamic detection range -8~68dbmq
- Sensor sensitivity -65dB(0dB=1 Volt/mcbar RMS SPL)
- The linearity error is less than 10%
Characteristics of the AA sensor
- The range of detectable frequencies is 3~100 MHz
- Dynamic detection range 0~60dBmV
- The linearity error is less than 10%
Information about the display
- Display Type Color Touch LCD display
- Display brightness 400 cd/m2
- IPS Display Technology
- Sunlight Visual Glass Coating Technology
- Display resolutions are 800x480 pixels
- Display size 5 inches / 12.6cm
Image Modes
- Image modes IR, Visible spectrum, picture in picture, IMIX*, Thermal mixing
- Ultra-high resolution mode is supported. Magnification of the image by 4 times
- Alarm mode Automatic sound and light alarms at preset temperature (above/below)
Temperature measurement
- The measured temperature range is -40 °C to +2000 °C
- Setting the temperature range
- -40 °C to +150 °C
- From 0 °C to 410 °C
- From 300 °C to 2000 °C
- Temperature measurement error ±2°C or ±2%
Image Analysis
- Isotherm is lower or higher than the set temperature
- Emissivity correction is variable from 0.1 to 1.0
- Temperature analysis Maximum / Minimum / Central
- Custom settings For up to 10 custom points, up to 10 custom squares, 5 custom lines
- Distance correction Manual adjustment of the distance to the measured object
- Ambient temperature correction Variable from -270 °C to +300 °C
- Correction of ambient humidity from 0 to 100%
- Correction of weather conditions Changing the state of weather conditions: clear, cloudy, rain, fog, snow
- Wind speed correction Setting the required wind speed
- Load correction of electrical equipment Changes in voltage and current
Image Settings
- 10 color palettes (iron, rainbow, black and white, etc.)
System settings
- Command settings Time, Date, Language, units, Brightness
- Alarm Setting the temperature value, setting the parameter – lower / higher, alarm – light and sound
- Laser Laser pointer, Class 2
- Laser alignment The laser position is automatically displayed on the image
- Text comments The ability to create a text annotation for an image
- Voice comments The ability to create voice annotations to an image
- Automatic shutdown Availability
Data storage
- in the IR image format.jpg / .png (radiometric)
- H.264 video format (radiometric)
- The format of the image in the visible spectrum .jpg
Digital Camera
- The focus is Fixed
- The resolution of the digital camera is 5 MP
- Field of view 55°x42°
- Backlight Built-in LED flashlight
Data transfer interfaces
- Data transfer to PC Via USB
- Wi-Fi Real-time image transfer to mobile phone/computer via Wi-fi
- Bluetooth Support for recording and playback using Bluetooth headset
- HDMI The presence of a Micro HDMI output
- 4G Real-time wireless data transmission to mobile devices/computers via 4G
Memory capacity
- SD Card Type High-speed Micro SD Card
- 32 GB of memory (more than 10,000 infrared images)
Power supply system
- Battery Type Removable Lithium polymer battery
- Supply voltage 11.1 V
- Battery capacity is 2100 mAh
- The operating time of the thermal imager is at least 3 hours
- Charging Method Two-piece 12V charger
- Charging time is 2 hours
Environmental data
- Enclosure protection class IP54 (IEC 60529)
- Operating temperature range -20 °C to + 55 °C
- Storage temperature -40°C to 70°C
- 2G Vibration resistance (IEC 60068-2-6)
- Shock resistance 25G (IEC 60068-2-27)
- Drop resistance Safe fall from 2 meters
- Humidity (during operation and storage) <95%, non-condensing
Physical data
- Weight 1.23 kg.
- Dimensions 159.5x135.9x330.7 mm
- The color is Red
- Material Plastic, Glass, Metal
- Tripod mount UNC ¼" -20
Guarantee
- Warranty The basic warranty is 24 months from the date of commissioning
- Additional warranty The possibility of extending the warranty for up to 5 years
Delivery Information
- Packing type Cardboard box
- Package weight 5 kg
- Package dimensions 440x360x200 mm
- Country of manufacture Russian Federation
- Scope of delivery
- Thermal imaging camera – 1 piece
- Partial discharge sensor – 1 piece
- Transportation shockproof plastic case – 1 piece
- Battery pack – 2 pieces
- Headset – 1 piece
- Two–piece charger - 1 piece
- Power supply for the charger – 1 piece
- 32 GB SD card – 1 piece
- Card reader – 1 piece
- Micro HDMI cable – 1 piece
- USB cable – 1 piece
- User Manual – 1 piece
- Factory calibration certificate – 1 piece
- Technical data sheet – 1 piece
Thermal imaging data processing
- Software Free software of "SEVIRAL IR Research"
- Compatibility of Linux-based OS (Astra Linux) and Windows from version XP and above
- The number of simultaneous users is unlimited
Characteristics
General Specifications
Russia
Russia
Dimensions of packaged product
Dimensions of product
Specifications
- The first digit (from 0 to 6): Protection from dust and solid particles.
- The second digit (from 0 to 9): Protection from moisture and water.
- The first digit (from 0 to 6): Protection from dust and solid particles.
- The second digit (from 0 to 9): Protection from moisture and water.
Accuracy (or error) is the maximum allowable deviation of the measurement result from the actual temperature of the object. The smaller these numbers are, the more reliable the data you will receive.
- ±1°C / ±1% (High): Professional grade. It is necessary for energy audit, searching for microcracks in electronics and accurate scientific research. ±2°C / ±2% (Standard): The most common option. It is ideal for finding heat leaks in homes, checking the operation of underfloor heating and radiators.
- ±3°C and above (Basic): Budget models. They are suitable for household needs, when you just need to understand "hot or cold", without being tied to exact numbers.
Accuracy (or error) is the maximum allowable deviation of the measurement result from the actual temperature of the object. The smaller these numbers are, the more reliable the data you will receive.
- ±1°C / ±1% (High): Professional grade. It is necessary for energy audit, searching for microcracks in electronics and accurate scientific research. ±2°C / ±2% (Standard): The most common option. It is ideal for finding heat leaks in homes, checking the operation of underfloor heating and radiators.
- ±3°C and above (Basic): Budget models. They are suitable for household needs, when you just need to understand "hot or cold", without being tied to exact numbers.
- What it affects: When going beyond the specified limits (for example, in severe frost or in a hot workshop), the screen may start to "slow down", the battery will run out in a matter of minutes, and the measurement error will increase dramatically.
- For outdoor work in winter: Choose models with a lower threshold of -20°C or -30°C. Conventional appliances (from -10°C) can switch off at the most crucial moment.
- To inspect roofs in summer or industrial facilities: Pay attention to the upper limit (+50°C or +60°C), as the device body heats up in the sun or from the equipment.
- What it affects: When going beyond the specified limits (for example, in severe frost or in a hot workshop), the screen may start to "slow down", the battery will run out in a matter of minutes, and the measurement error will increase dramatically.
- For outdoor work in winter: Choose models with a lower threshold of -20°C or -30°C. Conventional appliances (from -10°C) can switch off at the most crucial moment.
- To inspect roofs in summer or industrial facilities: Pay attention to the upper limit (+50°C or +60°C), as the device body heats up in the sun or from the equipment.
Lower threshold:
- Usually -10...-20 °C: Important for finding heat leaks in winter, checking the quality of thermal insulation of walls and windows, and identifying "cold bridges" outside the building.
Upper threshold:
- Up to +120...+150 °C: Sufficient for checking heating systems, underfloor heating and finding blockages in radiators.
- Up to +300...+400 °C: Necessary for diagnostics of electrical panels, circuit breakers, loaded bearings and industrial equipment.
Lower threshold:
- Usually -10...-20 °C: Important for finding heat leaks in winter, checking the quality of thermal insulation of walls and windows, and identifying "cold bridges" outside the building.
Upper threshold:
- Up to +120...+150 °C: Sufficient for checking heating systems, underfloor heating and finding blockages in radiators.
- Up to +300...+400 °C: Necessary for diagnostics of electrical panels, circuit breakers, loaded bearings and industrial equipment.
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
