Lid-making machine KDM Kursant-500
Russia
Russia
Description
The KDM Kursant lid-making machine is developed and manufactured by RIG LLC.
The KDM Cadet is a semi-automatic lid-making machine with a high degree of automation and ergonomics, and is also manufactured in accordance with GOST R 51205-98.
KDM Kursant is designed for the production of small and medium-sized editions, allows you to produce a full range of cashing work, as well as hardcover work.
The KDM Cadet machine has a high degree of automation and ergonomics:
- automatic stops of the liner (bookbinding material)
- automatic stops of cardboard (bookbinding cardboard)
- a node for automatic bending of the edges of the binding cover
- a node for mechanical bending of the edges of the binding cover (important in the presence of cutter errors, non-standard orders, small-format products)
- automatic stacking of finished products (no time is wasted on warehousing finished products, the machine operator does not stop working when another employee takes finished products from him for subsequent technological operations)
- adjusting the speed of the adhesive shafts (usually operators work at high speed, but when making adhesives, especially small-format ones in products such as certificates, diplomas, etc. operators install for convenience of work and the exclusion of defects low speed)
- illumination of precise positioning (important when assembling digital prints, when the liner is printed on a digital printing press)
- built-in vacuum (no compressor is needed, as well as quiet operation of the machine, which allows it to be used in office premises)
- is equipped initially with both turn-around and pass-through pens (turn-around pens are relevant when it is necessary to obtain a liner with with glue up, products such as book covers, and passageways are relevant for interior gluing when it is required to receive products such as certificates and diplomas with glue down).
The Cadet KDM is designed in such a way that, due to the ergonomics of the process, it ensures high productivity, while the machine is structurally designed in such a way that the operator constantly monitors the quality of the products produced.
The 220V single-phase power supply of the machine, with a heating consumption of up to 2 kW, allows it to be operated in office premises.
At the end of the work shift, cleaning the car takes 1-2 minutes.
All these advantages of KDM Kursant provide high productivity, reduce operator errors and fatigue, and minimize maintenance time (setting up the machine for 1-2 minutes, cleaning the machine for 1-2 minutes).
Moreover, due to the fact that low-skilled personnel are often used in printing houses, the following protection systems are implemented in the machine:
- a system to protect the adhesive shafts from chipping when foreign objects enter.
- the system of protecting the necks of the adhesive shafts from bending the necks (important when winding the liner on the shaft or foreign objects: keys, bolts, watches, scarves, etc.).
- the technology of protecting the surface of calendering shafts.
- technology to protect automation from surges in the electrical network.
Technical specifications:
The minimum thickness of the cardboard side (automatic valve bend) mm - 1
- Gluing unit (width) mm - 520
- Assembly table (format) mm - 600*860
- Number of stops pcs - 2
- The width of the stops is mm - 7
- Additional stops - any width is an option
- Reverse feathers - yes
- Passing feathers - yes
- Automatic control of cardboard stops (electric pedal) - yes
- Automatic control of the liner stops (electric pedal) - yes
- Operator's hands-free function - Yes
- Magnetic side stop of the liner - yes
- Automatic valve closure unit - yes
- Mechanical valve closure unit - yes
- Illumination of the precise positioning of the spine - yes
- Vacuum plug-in/unplugged - yes
- Illumination of the operator's workplace is an option
- Two-channel glue temperature control system - yes
- Adjustment of the applied adhesive layer - yes
- Storage system (shelf) - optional
- Tilt-adjustable calender output table - optional
- The maximum length of the closed liner edge is 700
- Calendering unit (width) mm - 520
- Minimum product size (mechanical valve bend) mm - 50*50
- Minimum product size (automatic valve bend) mm - 100*100
- The maximum product size (mechanical valve bend) is 500*700 mm.
- The maximum length of the mechanical bend of the valve is 700 mm.
- Recommended valve width (mechanical valve bend) mm - from 8 mm
- Recommended valve width (automatic valve bend) mm - from 18 mm
- Working with hot glue - yes
- Working with cold glue - yes
- The recommended temperature range of hot glue is degrees Celsius - 0 - 75
- Power supply standard 220 V - yes
- Modular design is an option
Characteristics
General Specifications
Russia
Russia
Dimensions of packaged product
Dimensions of product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
