Container Sever UBK-3 basic configuration (based on a sea container)
Russia
Russia
Description
The UBK container series is produced on the basis of a large-capacity universal cargo (marine) container according to GOST 20259 and is sheathed from the inside with three-layer, galvanized sandwich panels with mineral wool insulation, flammability group G 1 according to GOST 30244.
These containers are intended for the placement and storage of equipment, in particular, power plants used as the main and backup power supply source for autonomous facilities.
UBK containers provide protection from adverse environmental influences and internal comfortable operation of maintenance personnel, as well as allows you to integrate a wide range of additional equipment to ensure long-term, autonomous operation of the station, in conditions of negative temperatures.
The standard version is designed for use in the temperature range from -40 ° C to +40 ° C.
The design of the block container consists of:
- Cargo (sea) container according to GOST 20259
- The walls and ceiling inside are made of sandwich panels with a thickness of 50 mm.
- The floor is covered with a corrugated sheet 3 mm thick.
- Standard entrance door.
- The door is equipped with a door closer.
- The type of lock is with the possibility of internal closing.
- Holes for cable I/O.
The standard package includes:
- Supply and exhaust ventilation with openings equipped with electric louver valves.
- A shield for your own needs
- Main and emergency lighting
- Fire extinguishing system
- Gas heating system
- Fire alarm system
- Heating system (convector)
- Manual fire extinguishing kit (OU type fire extinguisher)
Specifications:
- Sandwich panel thickness (mm) - 50
- The maximum weight of the equipment (kg) is 1500
- Overall dimensions (L; W; H; mm) - 2988x2438x2591
- Lighting - yes
- Electric heating - yes
- A closet for your own needs - yes
- Ventilation blinds with electric drive - yes
- Exterior grilles to blinds - yes
- Fire alarm system - yes
- Powder Fire Extinguishing Module - yes
- Door opening (W;H; mm) - 820x2000
- Gas heating system - yes
- Transportation units - Corner fittings
- Weight, kg - 2000
- Warranty period (months) - 12
- Heated blinds are an option
- Security alarm system is an option
- Noise-absorbing awning is an option
- Additional compartment - option
- Swing gate - option
- Sledge is an option
- Fuel pumping system is an option
- The gas fire extinguishing module is an option
- Aerosol fire extinguishing module is an option
- Cable duct is an option
- Ventilation blinds with manual drive - optional
- Additional ventilation with thermostat is an option
- The permissible length of the equipment (mm) is 2400
- The permissible width of the equipment (mm) is 2100
- The permissible height of the equipment (mm) is 2200
Characteristics
General Specifications
Russia
Russia
Dimensions of product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
