DLS650/10 oil-free low noise compressor 650 W, 120 l/min, 10 L Denzel receiver
Russia
China
Description
The oil-free low-noise compressor Denzel DLS650/10 58021 with a power of 650 W and a capacity of 120 l/min, with a 10 l receiver, is suitable for household use, and will also be useful in car service stations, on construction sites and in furniture production. Compressed air generation takes place without oil and does not cause environmental damage. There is no need to deal with oil mist at the exit, which is very important when carrying out painting work. Spray guns, pneumatic gravers and pneumatic trailers, simple pneumatic tools for pumping tires, purging equipment or individual parts can be connected to the compressor.
With a power of 650 Watts, the compressor operates very quietly due to the two-cylinder layout and low engine speeds (1400 rpm), the volume is reduced to the level of the refrigerator. The coaxial drive provides a stable supply of compressed air up to 8 atm. to the compact receiver.
Advantages:
- Pressure switch — the operation of the system is regulated by automatic switching on and off, which allows you to maintain productivity at the required level.
- Automatic safety valve — if the relay does not turn off the motor when the pressure exceeds 8 bar, air is discharged, which eliminates emergencies and destruction of the receiver.
- Engine protection — wear-resistant cylinders have a ribbed surface, which significantly reduces the load on the engine, protects it from heating and improves heat dissipation.
- The presence of a pressure gauge — visual monitoring of compressed air pressure significantly increases the safety of operation.
- Thermal protection — in case of excessive heating, the compressor is turned off to save the engine and ensure fire safety.
- Reliable air filter — the metal body is designed for long service life, and the paper filter element with 8 folds minimizes air flow resistance.
- Lossless filtration — the rubber seal eliminates the ingress of an uncleaned air stream into the compressor.
- Automatic start — up - if the pressure drops below 6 atmospheres, the system starts up again on its own, saving the user time.
- Convenient condensate drain — the valve with a finger stop can be easily rotated to remove excess moisture, this avoids the formation of corrosion in the receiver.
- Ergonomic transport handle — comfortable grip and non-slip coating make it easier to move the installation.
- Stability — rubber supports reduce vibration and prevent the compressor from tipping over.
- 3 year warranty — the high quality of the compressor is confirmed by the manufacturer.
Characteristics
General Specifications
China
Russia
Dimensions of packaged product
Specifications
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
