Set: RGK SP-100G rotary leveler + rack tripod
Russia
China
Description
The RGK SP-100G rotary leveler with a green laser beam is equally well suited for marking in a large room and for outdoor work. The bright line is perfectly visible at a distance of up to 30 meters, but the full potential of the device is revealed with the radiation receiver, which is included in the kit. With this format of operation, the range expands to 100 meters, which allows you to completely cover a large area.
Two installation options
The laser level can project a line in 2 positions. The horizon will help to align, level with the receiver, or, for example, mount the ceiling. And the vertical is indispensable when installing partitions, pipes, wall decoration and other construction and repair tasks. The functionality is successfully complemented by the zenith point, which is useful when transferring markup.
Work at an angle
The RGK SP-100G rotary level can be switched to manual mode (without self-leveling) and set at any desired angle. The inclined beam is useful for mounting stairs, decorative elements and landscape design.
Antishock
If you touch the device after turning on this function, the operation will stop immediately and will not continue as in normal mode. Thus, it will immediately become clear that the equipment has shifted for some reason, and it is better to check it.
Adjusting the rotation speed
Adjusting the emitter rotation speed helps to adapt the RGK SP-100G rotary level to different distances and lighting conditions.
Scan mode
Projection in a certain sector is necessary in cases where several craftsmen work at the facility at once. You can choose one of several options for the width of the sector, and do not interfere with colleagues. In addition, it is possible to rotate the prism with a certain pitch, which will be especially useful for marking. You can manually move either a single point or an entire sector.
Stability and accuracy
The device is based on a powerful servo compensator, which provides a minimum line error of only ± 1.5 mm per 10 meters and self-leveling in the range of ± 5 °. Servos, unlike conventional laser levels, completely smooths out vibrations from heavy hand tools and construction equipment, the line always remains flawlessly stable.
Technical Specifications:
RGK SP-100G
- The number of horizontal planes is 1.
- The horizontal scan angle is 360°.
- The accuracy is ± 1.5 mm per 10 m.
- The range of operation is up to 30 m.
- The range of operation with the receiver is up to 200 m.
- The color of the laser beam is green.
- The type of compensator is a servo drive.
- Automatic leveling system (compensator operating range) - ± 5°.
- Construction of inclined lines.
- Mounting on a tripod.
- Batteries - 4 x AA (1.5 V) or AC/DC 4.8-6V power supply.
- Battery life is up to 15 hours.
- The laser class is 2.
- The wavelength is 255 nm.
- The power is < 1 MW.
- The indication is audible/visual (light).
- The degree of protection against dust and moisture is IPX54.
- The operating temperature range is -20° to +50°C.
- The storage temperature is -20° to +70°C.
RGK SH-170
- Application - for rotary levelers.
- The material is aluminum.
- Height - from 0.69 to 1.7 m.
- The threaded connection is 5/8".
- Clips are clips.
RGK LR-2
- The purpose is for laser levelling.
- Height - up to 2.4 m.
- The millimeter scale.
Equipment:
- RGK SP-100G laser level.
- RGK SH-170 elevator tripod.
- The leveling rail RGK LR-2.
- A laser radiation receiver.
- The remote control.
- Bracket for mounting on a rail and mounting.
- Laser glasses.
- Target.
- Memory.
- Case.
- Instruction manual.
Characteristics
General Specifications
China
Russia
Specifications
- Linear: The most popular type. Projects one or two perpendicular lines (a cross). Ideal for interior work: laying tiles, installing furniture, or leveling cornices.
- Linear 3D and 4D: Professional devices that create 360° closed lines around their axis.
- 3D gives one horizontal and two vertical planes. 4D adds a second horizontal line (often near the floor), which is indispensable when pouring the screed.
- Combined (Linear and dotted): In addition to lines, it projects points (zenith, nadir). This helps to "transfer" the tags from the floor to the ceiling, which is important when installing lighting or partitions.
- Laser self-leveling: Indicates the presence of a pendulum mechanism. The device aligns the beam itself if it is placed on an uneven surface (within 3-5°). If the tilt is too high, the beam will start flashing, preventing an error.
- Optical: A classic geodetic instrument. It does not build laser beams, it requires work in tandem with an assistant and a rail. It is used outdoors for foundation and road work, as it is not afraid of the bright sun.
- Linear: The most popular type. Projects one or two perpendicular lines (a cross). Ideal for interior work: laying tiles, installing furniture, or leveling cornices.
- Linear 3D and 4D: Professional devices that create 360° closed lines around their axis.
- 3D gives one horizontal and two vertical planes. 4D adds a second horizontal line (often near the floor), which is indispensable when pouring the screed.
- Combined (Linear and dotted): In addition to lines, it projects points (zenith, nadir). This helps to "transfer" the tags from the floor to the ceiling, which is important when installing lighting or partitions.
- Laser self-leveling: Indicates the presence of a pendulum mechanism. The device aligns the beam itself if it is placed on an uneven surface (within 3-5°). If the tilt is too high, the beam will start flashing, preventing an error.
- Optical: A classic geodetic instrument. It does not build laser beams, it requires work in tandem with an assistant and a rail. It is used outdoors for foundation and road work, as it is not afraid of the bright sun.
This parameter shows how many laser lines or dots the device can project at the same time. The more beams there are, the less you have to move the level to mark the room.
-
1-2 rays: Classic "cross" (vertical and horizontal). It is ideal for everyday tasks: to hang a shelf, a painting or to paste wallpaper.
- 3-5 beams: Allow additional marking of plumb points (floor/ceiling) and right angles. It is convenient for installation of partitions. 8-12 rays (3D): Project closed 360° lines on all axes. They allow you to work in the entire room at once, they are indispensable when filling the floor and installing stretch ceilings.
- 16 beams (4D): Maximum configuration with two horizontal planes (top and bottom). The lower beam runs as close to the floor as possible, which is convenient for laying tiles.
This parameter shows how many laser lines or dots the device can project at the same time. The more beams there are, the less you have to move the level to mark the room.
-
1-2 rays: Classic "cross" (vertical and horizontal). It is ideal for everyday tasks: to hang a shelf, a painting or to paste wallpaper.
- 3-5 beams: Allow additional marking of plumb points (floor/ceiling) and right angles. It is convenient for installation of partitions. 8-12 rays (3D): Project closed 360° lines on all axes. They allow you to work in the entire room at once, they are indispensable when filling the floor and installing stretch ceilings.
- 16 beams (4D): Maximum configuration with two horizontal planes (top and bottom). The lower beam runs as close to the floor as possible, which is convenient for laying tiles.
- Vertical / Horizontal: The basic option for simple tasks (mounting shelves, leveling paintings).
- Scan angle (e.g. 100° or 240°): Indicates the length of the line. The larger the angle, the less you need to rearrange the device to capture adjacent walls.
- 360° (circular marking): The line runs around the entire perimeter of the room. This allows you to work in the entire room at once without turning the level. Ideal for stretch ceilings and floor screeds.
- Points (up/down/ forward/sides): Called a "plumb line". They are used to transfer labels from the floor to the ceiling (for example, when installing lamps) or to quickly arrange partitions at right angles.
- Vertical / Horizontal: The basic option for simple tasks (mounting shelves, leveling paintings).
- Scan angle (e.g. 100° or 240°): Indicates the length of the line. The larger the angle, the less you need to rearrange the device to capture adjacent walls.
- 360° (circular marking): The line runs around the entire perimeter of the room. This allows you to work in the entire room at once without turning the level. Ideal for stretch ceilings and floor screeds.
- Points (up/down/ forward/sides): Called a "plumb line". They are used to transfer labels from the floor to the ceiling (for example, when installing lamps) or to quickly arrange partitions at right angles.
This indicator (Ingress Protection) determines how well the device body is protected from dust and moisture. This is critically important for the laser level, since dust inside the case can settle on the prism and distort the accuracy of the beam, and moisture can disable electronics.
- The first digit (0-6): Protection from dust and solid particles.
- The second digit (0-8): Protection from water.
- Letter X: Protection for this parameter has not been tested.
This indicator (Ingress Protection) determines how well the device body is protected from dust and moisture. This is critically important for the laser level, since dust inside the case can settle on the prism and distort the accuracy of the beam, and moisture can disable electronics.
- The first digit (0-6): Protection from dust and solid particles.
- The second digit (0-8): Protection from water.
- Letter X: Protection for this parameter has not been tested.
This is the maximum distance from the instrument to the measuring point at which the laser beam can be detected by a special receiver device (detector).
- Outdoor work: It is almost impossible to mark the foundation or facade on a sunny day without a receiver.
- Large-scale facilities: Allows you to work in large workshops, hangars or on open construction sites.
- Save time: You don't have to wait for dusk or build intermediate points to "reach" the far wall.
This is the maximum distance from the instrument to the measuring point at which the laser beam can be detected by a special receiver device (detector).
- Outdoor work: It is almost impossible to mark the foundation or facade on a sunny day without a receiver.
- Large-scale facilities: Allows you to work in large workshops, hangars or on open construction sites.
- Save time: You don't have to wait for dusk or build intermediate points to "reach" the far wall.
- If you only work indoors: standard models with a range of +5°C are suitable.
- For facade and street work: choose models with a lower threshold of -10°C or -18°C. At low temperatures, the usual levels may be inaccurate or discharge quickly.
- Upper limit (+50°C): important when working in summer in direct sunlight to avoid burning out the laser emitter.
- If you only work indoors: standard models with a range of +5°C are suitable.
- For facade and street work: choose models with a lower threshold of -10°C or -18°C. At low temperatures, the usual levels may be inaccurate or discharge quickly.
- Upper limit (+50°C): important when working in summer in direct sunlight to avoid burning out the laser emitter.
500 – 540 nm (Green beam) The most popular choice for professionals.
- Pros: Perfectly visible at long distances and in daylight.
- Cons: It consumes battery power faster and costs more.
630 – 670 nm (Red beam) The classic option for standard tasks.
- Advantages: Affordable price, economical energy consumption (it lasts longer on a single charge).
- Cons: It is poorly visible outdoors in sunny weather or in very spacious, brightly lit halls.
500 – 540 nm (Green beam) The most popular choice for professionals.
- Pros: Perfectly visible at long distances and in daylight.
- Cons: It consumes battery power faster and costs more.
630 – 670 nm (Red beam) The classic option for standard tasks.
- Advantages: Affordable price, economical energy consumption (it lasts longer on a single charge).
- Cons: It is poorly visible outdoors in sunny weather or in very spacious, brightly lit halls.
-
8-20 meters: Ideal for household repairs, apartment decoration, wallpaper gluing and furniture installation.
- 20-50 meters: Suitable for working in large rooms, sales halls or suburban areas in cloudy weather.
- More than 50 meters (up to 600 m): Professional rotary levellers for large-scale construction and road works.
-
8-20 meters: Ideal for household repairs, apartment decoration, wallpaper gluing and furniture installation.
- 20-50 meters: Suitable for working in large rooms, sales halls or suburban areas in cloudy weather.
- More than 50 meters (up to 600 m): Professional rotary levellers for large-scale construction and road works.
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
