Fluke 529 Calibrator
Russia
China
Description
The Fluke 725 calibrator is a versatile instrument capable of providing operational testing and configuration of various types of input and output devices and verification of secondary industrial automation equipment. Such a device is especially in demand in enterprises where complex automatic systems are installed that monitor technological processes using a large number of different types of sensors. The Fluke 725's functionality will allow it to be used instead of a set of separate calibrators, checking and configuring industrial automation with voltage, pressure, temperature converters, flow meters, etc.
When checking industrial automation systems, the Fluke 725 calibrator provides a full cycle of work. You can calibrate the sensors by disconnecting them from the system, and then check the correct functioning of the secondary equipment by sending signals to it that simulate the operation of the sensors. Using only one meter instead of several tools for all types of work significantly increases your mobility and efficiency of work. In addition, the Fluke 725 has a lower price than the total cost of devices for testing and configuring individual components of industrial automation systems.
When working with thermal sensors, the Fluke 725 can calibrate and simulate 12 types of thermocouples and 7 standard types of resistance thermometers. The calibrator is also capable of detecting and generating current signals, measuring voltage, resistance, frequency, etc. By connecting any of the 700Rhx series pressure modules, you can calibrate pressure sensors and transmitters, as well as relays and valves that work with non-aggressive gases and liquids.
The large-size backlit display displays the magnitude of the measured and generated signals with the selected units of measurement, as well as the active functions and modes of the Fluke 725 calibrator. Simultaneous monitoring of the magnitude of the signals at the input and output of the device under test makes it easy to calibrate converters and controllers of any type. The measurement results are displayed in different lines of the display, and an additional digital indicator can display the magnitude of the signal in percentage terms. At the same time, you can set the digital value or the nature of the input signal change, checking the reaction of the control object to determine the linearity of its characteristics.
When checking sensors and passive components of the current loop automation in offline mode, the Fluke 725 calibrator, whose price fully corresponds to its capabilities, can provide them with cyclic power from an internal source, while simultaneously measuring the magnitude of the DC signal. To speed up the calibrator's preparation for operation using standard procedures for testing sensors and transducers, settings for each type of device being tested can be stored in memory and accessed, if necessary, by simply selecting the corresponding cell number.
It is worth buying a Fluke 725 calibrator for those who are looking for maximum mobility and versatility when working with a large number of different types of equipment.
Characteristics
General Specifications
China
Russia
Dimensions of packaged product
Dimensions of product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
