Inverter Diesel Welding Generator TSS DGW 7.0/250D-R
Russia
Russia
Description
Appointment
Welding diesel generator TSS DGW 7.0/250D-R — is designed for professional Manual Arc Welding and power supply to electric consumers in the absence of a stationary power supply network.
Main features of the model
- Diesel engine
- Three-phase generator
- MMA welding with a piece electrode
- Inverter circuit
- Welding current 20-230A
- Welding and parallel power supply of electric consumers is acceptable
- Maximum power 7 kW
- Output voltage 230V
- Possibility of welding from a stationary 220V network
- All operating parameters are displayed on the control panel
Additional advantages of the model
- The engine is diesel, 4-stroke, single-cylinder, air-cooled, with direct fuel injection. The motor life of the engine is more than 2000 hours. All engines are pre-run-in before installation on the generator and are fully ready for operation. Each engine has a unique serial number.
- Simultaneous operation in welding mode and in power supply mode.
- The alternator of alternating current is synchronous, brush. The alternator is 100% copper, of a special type for welding operations.
- The BOSCH fuel injection injector ensures efficient operation of the fuel system, easy engine start and reduced fuel consumption.
- The AVR (Automatic Voltage Regulator) system of automatic voltage control - maintains the set voltage and guarantees the supply of high-quality current.
- The particularly reliable design of the manual starter guarantees up to 1500 engine starts in manual mode.
- Metal fuel tank of increased volume, equipped with a fuel level indicator.
- Stable operation of the generator at t° -15 + 40
- Transport wheels made of solid rubber with a steel base on bearings. The wheels are puncture resistant and do not require inflating or maintenance during the entire service life.
- Built-in overload protection protects against excessive load on the alternator, and also eliminates cases of overheating during prolonged use. Smart protection protects the generator from short circuit.
- Emergency stop due to low oil level. An oil pressure sensor is installed on the engine with an engine stop system if the minimum oil level is reached. Prolongs the service life and eliminates the reduction of engine life due to oil starvation. At the same time, a lamp lights up on the control panel, signaling a low oil level.
- The multifunctional display displays all the main parameters of the generator operation: Voltage, current frequency, and hours worked for timely maintenance.
- Bright display of welding current, allows you to clearly adjust and remember the amount of welding current.
- Remote adjustment of welding current, creates additional comfort when working as a welder.
- A 230V/16A socket and a 230V/32A power socket for connecting energy consumers.
- The frame structure is designed in such a way that it protects all elements of the generator during transportation, while maintaining convenient access to the nodes during routine maintenance or repair work. The motor and alternator are mounted on vibration-bearing supports.
- The welding current with smooth adjustment up to 230 A allows for continuous (PV-80%) welding with a 5 mm electrode without overloading or overheating the generator.
- Quick-release connections of welding cables of the same type as on welding sources operating from the mains, allow you to connect a cable with a cross section of up to 70mm.
- The frame, tank and all protective elements are painted by powder coating, which prevents the appearance of corrosion.
Specifications:
- Recommended oil type - SAE10W30, SAE10W40
- Noise level (dB/7m) - 77
- Launch type - manual
- Engine Model - 192F
- Rated current (A) - 28
- Rated power, kVA - 6.5
- Maximum power, kVA - 7
- Power factor - 1
- Execution - open
- The type of welding current is constant
- Output 12V (A) - 8.3
Equipment
- Welding Generator
- Ground terminal
- Electrode holder
- Transport wheels
- Oilcan
- Tool Kit
- User Manual
- Warranty card
Security guarantee
The equipment is manufactured in accordance with the requirements of the European standard EN 60974-1:2012 for the design and safety of arc welding power supplies. Complies with the requirements of the technical regulations of the Customs Union TR CU 004/2011 "On the safety of low-voltage equipment" and TR CU 020/2011 "Electromagnetic compatibility of technical means".
Quality control
All assembled devices are subject to mandatory inspection at production, then before shipment to the buyer they are checked at the TSS Group warehouse by the OTC controller.
Double quality control eliminates possible factory defects.
Warranty 12 months or 1000 hours*
* Depending on which event comes first.
Characteristics
General Specifications
Russia
Russia
Dimensions of product
Specifications
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
