INVAMAT 620 Mounting foam thermally expanding two-component fire protection, inline cartridge 250 / 450 ml (standard, foam output up to 2 liters)
Russia
Russia
Description
The INVAMAT DF-620 dispenser gun is used for application
Foam mounting thermally expanding two-component fire protection INVAMAT 620 is produced in accordance with the technical specifications 23.20.13-008-37166468-2018 and technological regulations INVAMAT-18/1. Meets the requirements of 123-FZ "TECHNICAL REGULATIONS ON FIRE SAFETY REQUIREMENTS", GOST R 53310-2009 "Cable penetrations, hermetic inlets and busbar passages. Fire safety requirements. Fire resistance test methods". The composition has proven itself well when used in structures with high fire resistance standards, is used for rapid sealing of mounting gaps of building structures, holes in partitions, after laying cables and pipes. The filling of the cavity is controlled visually. When creating a fire-resistant barrier, foam simultaneously provides thermal and sound insulation.
The composition foams for 10-30 seconds, filling the cavity. At the moment of foaming, the polyurethane foam heats up. The final hardness of the composition acquires in 1 minute at an air temperature of 20 ° C. After that, the foam can be cut with a knife, leveled, plastered and painted. The foam does not break down under the influence of temperature in the range of -30 ° — +100 ° C, but is not protected from UV radiation. Foam mounting thermally expanding two-component fire protection INVAMAT 620 seals structures, but does not replace metal fasteners. It has weak adhesion to polymer coatings. Before use, the product must be thermostated, that is, to acquire the ambient temperature.
Technical specifications:
- Cartridge volume (coaxial, standard version): Total volume /filling / foam output: 300 ml./250 ml./1.9-2.1 liters
- Cartridge volume (inline system, standard version):Total volume /filling / foam output: 450 ml./250 ml./ 1.9-2.1 liters
- Cartridge volume (inline system, increased output): Total volume /filling / foam output: 450 ml./250-430 ml./2-4 liters
- Inline cartridge: 1:2
- Fire resistance limit: 180 minutes
- Package contents: Foam cartridge, mixer, gloves.
- The end of the ascent: 30 — 40 seconds
- Storage and transportation temperature: +5°C — +25°C
- Application equipment: dispenser DF-620
- Application temperature: +10°C — +30°C
- Operating temperature: -30°C — +100°C
- Setting time: 35 seconds
- Curing time: 1 minute
- Recommended service life: 30 years
- Shelf life: 12 months
Characteristics
General Specifications
Russia
Russia
Specifications
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
