Primer HS-059 "LiDA" GRAY (semi-finished product with hardener No. 5)
Russia
Belarus
Description
Type:Primer HS-059 "LiDA" is a two-component system consisting of a semi-finished primer and hardener No. 5 (TU 6-10-1093), mixed before use.Semi-finished primers and enamels are a suspension of pigments in a solution of vinyl chloride copolymer with vinyl acetate in a mixture of organic solvents with the addition of epoxy resin and plasticizer.
Scope of application: primer and enamel are designed to protect the outer surfaces of railway freight cars and tanks, equipment, metal and reinforced concrete structures exposed to solutions of mineral acids, alkalis, salts, aggressive gases (SO2, CO2, NO2, NH3) and other chemical reagents with a temperature not exceeding 60 ° C, and for operation indoors – in combination with varnish HS-724 (GOST 23494).
The production of a primer and enamel of a different color is carried out under an agreement with the customer.
Primer and enamel are supplied complete: semi–finished primer – 100 mass parts and hardener No. 5 - 2.6 mass parts; semi–finished enamel - 100 mass parts and hardener No. 5 - 2.8 mass parts.
The primer and enamel are diluted before use to a working viscosity of 14-16 c according to a viscometer type VZ-246 (or VZ-4) with a nozzle diameter of 4 mm at a temperature of (20.0 ± 0.5) ° C with solvents P-4, P-4A (GOST 7827).
Advantages:The primer and enamel form a chemically resistant coating to protect the surface from the effects of aggressive alkaline and acidic environments operated in atmospheric conditions of various climatic regions, as well as for indoor use – in combination with varnish HS-724 (GOST 23494).
The primer can be used for weather-resistant PVC enamels of the XB brand and enamels based on copolymers vinyl chloride.
Surface preparation:Preparation of the surface of the product for painting is carried out in accordance with the requirements of the TNPA for the product, GOST 9.402 or STB ISO 12944-4.
The metal surface must be thoroughly cleaned of rust, scale and other contaminants before applying the primer (it is necessary to remove notches, burrs, welding splashes, round off sharp edges, corners, teeth and welding seams; there should be no grease, marking paint and other substances on the surface, such as mineral impurities, water-soluble salts affecting the quality surface preparation), sanded, degreased and thoroughly dried. It is most carefully necessary to clean the surface in the area of welds up to 3 cm wide from the remnants of fluxes, alkaline slags and oxides formed during welding. To improve the protective properties of the surface, it is recommended to pre-clean by sandblasting or shot blasting to the degree of purification from oxides 1-2 according to GOST 9.402. If necessary, the area of welds up to 3 cm wide should be treated with an additional layer of primer (paint with a brush) before painting.
Previously painted surfaces must be cleaned of dust, grease, sanded, degreased, dried and tested for staining. In case of swelling or peeling, the old coating must be removed.
To avoid condensation of moisture, the temperature of the painted surfaces must be at least
3 °C above the dew point temperature.
Reinforced concrete surfaces should be clean, dry, durable, without cracks, loose areas, dust and dirt. If necessary, concrete and reinforced concrete surfaces are cleaned dry (with brushes) and dedusted.
Application.Before use, semi-finished primers and enamels are thoroughly mixed. To 100 mass parts of the semi-finished primer and 100 mass parts of the semi-finished enamel, 2.6 and 2.8 mass parts of hardener No. 5 are added, respectively, thoroughly mixed and diluted with solvents P-4 and P-4A (GOST 7827) in an amount of up to 40% of the mass of the primer and enamel, filtered and applied to the prepared surfaces by pneumatic spraying. It is allowed to apply primer and enamel with a brush in hard-to-reach places.
The consumer independently selects the working viscosity depending on the production conditions (ambient temperature in the room, the diameter of the spray nozzle, the working pressure of compressed air, etc.).
In case of storage at low temperatures, the primer and enamel are kept in a warm room before application (to avoid condensation of moisture on the painted surface during painting) for at least 24 hours.
In the case of surface cleaning by sandblasting or shot blasting, the coating thickness should be increased taking into account the degree of surface roughness Ra (GOST 2789).
Obtaining a comprehensive coating for surfaces operated in open areas.
One layer of primer and two to four layers of enamel are applied successively to the prepared surface. Interlayer drying between layers is carried out for 30 minutes at a temperature of (20 ± 2) ° C and final drying – for 3 hours at a temperature of 70-75 ° C or for 24 hours at a temperature of (20 ± 2) ° C and relative humidity (65 ± 5) %. The thickness of the dried the complex coating should be 60 – 125 microns.
Obtaining a comprehensive coating for surfaces operated indoors.
One layer of primer, two to four layers of enamel and one layer of varnish HS-724 (GOST 23494) are applied sequentially to the prepared surface. Interlayer drying between layers is carried out for 30 minutes at a temperature of (20 ± 2) ° C and final drying – for 3 hours at a temperature of 70-75 ° C or for 24 hours at a temperature of (20 ± 2) ° C and relative humidity (65 ± 5) %. The thickness of the dried the complex coating should be 80 - 150 microns.
The coating system acquires operational qualities after exposure for 5-7 days.
The consumptionof primer and enamel for a single-layer coating is 120-150 g/m2 and 130-160 g/m2, respectively, without taking into account the complexity of the surface to be painted, its preparation, application method, color, personnel qualifications and other factors.
Storage:Semi-finished primers and enamels should be stored in tightly closed containers, away from heating devices and protected from moisture and direct sunlight. Keep away from fire.
Precautions: Persons involved in the painting work should be provided with personal protective equipment (overalls, goggles, rubber gloves). During the painting works and after their completion, ventilate the room.
The dried coating does not have a toxic effect on the environment and the human body.
Characteristics
General Specifications
Belarus
Russia
Dimensions of packaged product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
