On the Enex marketplace, products are sold directly by manufacturers and trading companies
Sing in
0
Comparison
0
Order template
0
Cart

Flexible shaft with vibrating tip TSS VVN 8/70DU (length 8000 mm; dia. 70mm)

To order template
Remove from template
Compare
Remove from comparison
Flexible shaft with vibrating tip TSS VVN 8/70DU (length 8000 mm; dia. 70mm)
Flexible shaft with vibrating tip TSS VVN 8/70DU (length 8000 mm; dia. 70mm)
Flexible shaft with vibrating tip TSS VVN 8/70DU (length 8000 mm; dia. 70mm)
Flexible shaft with vibrating tip TSS VVN 8/70DU (length 8000 mm; dia. 70mm)
Manufacturer
SHH
Brand Country
Russia Russia
Country of origin
Russia Russia
Weight, kg
2
Tip diameter, mm
70
Length, mm
8000
Flexible shaft with vibrating tip TSS VVN 8/70DU (length 8000 mm; dia. 70mm)
Vendor code: 016917
Leave feedback
18 935 rub.
The price is set by the manufacturer.
Manufacturer SHH trades with VAT 20%
The price is valid for today, 22.12.2024.
+ 379 bonus rub. for purchase
Manufacturing time:
3 days
To be requested to manufacturer
Request
There are no offers from trading companies
Sell on Enex
Description

Description

Deep vibrators are designed to seal concrete mixtures when laying them in monolithic structures with varying degrees of reinforcement, as well as in the manufacture of concrete and reinforced concrete products for prefabricated construction. The working set of a deep vibrator with a flexible shaft consists of an electric motor, a flexible shaft and a vibrating tip.

When choosing a shaft, the following rules must be followed:

The shaft length is selected based on the thickness of the concrete mix with a margin of 1 m. Long shafts are used for pouring reinforced concrete supports, shafts 2-5 m long are usually enough for pouring foundations, and short 1.5-2 m – for sealing floors.

The diameter of the vibrating tip (mace) is selected based on the density of the reinforcement laying. The diameter should be 1.5 times less than the minimum gaps between the rods of the reinforcement structure, if the reinforcement is rare or not used, then a tip of 70 mm or more can be used, because in this case the efficiency of vibration sealing increases, and the complexity of the process decreases.

Distinctive features:

  • A flexible shaft with a pendulum-type vibrating tip.
  • Suitable for all types of concrete mix.
  • Several thousand vibrations per minute ensure high quality work.
  • The flexible shaft and the mace are not separable.
  • The type of connection used is designed for fast and reliable connection of the shaft and the drive.
  • The flexible shaft is made of lightweight, durable material for long-term operation and easier operator operation.
  • Compatible with electric drives: TSS EP. When choosing an electric drive, the weight of the shaft must be taken into account. The recommended maximum shaft weight is indicated in the characteristics of the electric drive.

Specifications:

  • Type of equipment - pendulum type
  • Connection type - Remote control
  • The length of the flexible shaft, m - 7.5
  • The diameter of the vibrating tip, mm - 70
  • The length is flexible. shaft with vibrating tip, m - 8
  • Weight, kg - 26.5
  • Package dimensions (L;W;H; mm) - 750x550x60
Characteristics

Characteristics

General Specifications

Manufacturer
SHH
Vendor code
016917
Country of origin
Russia
Brand Country
Russia
Production time
3 days
Minimum order
1

Dimensions of product

Length, mm
8000

Specifications

Tip diameter, mm
70
Reviews (0)
Reviews (0)
Terms of delivery

Terms of delivery

Who provides the delivery of goods?

On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.

What are the delivery methods?

You can choose any convenient way for you to receive an order:
  • Pickup from partner locations or from the manufacturer's warehouse

    If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge.
  • Delivery to the terminal by a transport company

    Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering.
  • Delivery to the door by courier of the transport company

    Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
You can find out the exact information about the delivery methods of your order when placing an order or by contacting us by phone 8 800 707-56-00 or email info@enex.market .

How can I keep track of the shipped product?

After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.

Payment methods

Payment methods

Payment by bank card online

You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.

To make a transaction, you will need:
  • your bank card number;
  • expiration date of your bank card;
  • CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
  • confirm the card transaction, for example, with a one-time password from an SMS.

Payment according to the invoice

On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.

In order for the order to be accepted, the invoice must be paid within 3 days.

Payment with bonuses

The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.

The seller's indication on the marketplace

Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.

Information about the supplier is always indicated when placing an order, as well as in the invoice (when paying by invoice) or in the receipt (when paying by card). The invoice contains the terms of delivery of the goods, which are accepted by the buyer when paying for it.

Read more about the rules of Sale and delivery
Return of the product

Return of goods

Is it possible to return the purchased product?

If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.

Rules for the sale of goods.

Return of goods of proper quality

For individuals

The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.

The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.

In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.

For legal entities

The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.

Return of goods of inadequate quality

For individuals

The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.

For legal entities

The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.

Distribution of responsibility

In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.

If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.

If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace. 

Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.

The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.

For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .

Full list of refund and exchange conditions

Flexible shaft with vibrating tip TSS VVN 8/70DU (length 8000 mm; dia. 70mm)
18 935 rub.
Flexible shaft with vibrating tip TSS VVN 8/70DU (length 8000 mm; dia. 70mm)
Flexible shaft with vibrating tip TSS VVN 8/70DU (length 8000 mm; dia. 70mm)
Leave feedback
Vendor code: 016917
Already 247089 products from 810 manufacturers
Selling tools directly from the manufacturer
Comparison of prices of producers and trading companies
Direct dialogue with the manufacturer on commercial and technical issues