Enamel ML-12 "K" GOLDEN YELLOW
Description
Type:Enamel is a suspension of pigments in solutions of melamine-formaldehyde resins in organic solvents.
Scope of application:Enamel is intended for painting primed metal surfaces of products operated both in atmospheric conditions and indoors.
Advantages:Enamel coatings have high decorative properties when used in atmospheric conditions and indoors. Enamels are distinguished by a bright color, high gloss and a degree of dispersion (10 microns). The enamel coating is resistant to temperature changes ranging from minus 60 ° C to plus 60 ° C.
Preparation:Before applying the enamel, the primed surface, if necessary, is sanded, degreased and thoroughly dried. Previously painted surfaces are cleaned of fragile layers of the old coating, the old coating is removed, the entire surface is cleaned mechanically, dedusted, degreased and dried. If the type of old paintwork is unknown, then it must be checked for compatibility (it is recommended to carry out a control staining of a small area of the surface). In case of swelling or peeling, the old coating must be completely removed. To avoid condensation of moisture, the temperature of the painted surface must be at least 3 °C above the dew point temperature. To improve the adhesion and protective properties of the complex coating, preliminary phosphating or priming with a phosphating primer VL-02 (GOST 12707) of the prepared surface of the products is recommended. For subsequent priming, primers based on epoxy, polyvinylbutyral, glyptal and phenolic resins can be used. Recommended primers EP-0228 (TU 6-10-1943), EP-045 (TU BY 500021625.106), GF-0119 (GOST 23343), GF-021 (GOST 25129).
Recommendations for application: Enamel is applied to the primed surface by pneumatic and electrostatic spraying. When tinting small areas, it can be applied with a brush.
The enamel is thoroughly mixed and filtered if necessary. When applied by pneumatic spraying, the enamel is diluted with an oil solvent (GOST 10214), when sprayed in an electric field – with RE-1B, RE-2B diluents (GOST 18187) in an amount of no more than 25% of the mass of undiluted enamel. When applying with a brush, the enamel, if necessary, is diluted with a solvent in an amount of no more than 5% of the mass of undiluted enamel.
The enamel is applied at a temperature of 15 - 35 ° C and a relative humidity of no more than 80% in two layers by the wet-on-wet method with intermediate drying at a temperature of (20 ± 2) ° C for 5-7 minutes, exposure at a temperature of (20 ± 2) ° C for 5-7 min and final drying at a temperature of 130 - 135 ° C for 35 min. The thickness of the dried two-layer enamel coating should be at least 35 microns.
The consumptionof enamel for a two-layer dried coating is 100 - 120 g / m2, without taking into account the complexity of the surface to be painted, the method of application, the color of the enamel, the qualifications of personnel and other factors. To reduce the drying temperature of the coating, it is necessary to add the IZUR - 021 hardener to the enamel in an amount of 10% of the mass of undiluted enamel. Drying time of the two-layer enamel coating with a hardener:
- at a temperature of (20 ± 2) ° C for 24 hours;
- at a temperature of (60 ± 2) ° C for 2 hours;
- at a temperature of (80 ± 2) ° C for 1 hour;
- at a temperature of (90 ± 2) ° C for 40 minutes.
Coating servicelife : A coating system consisting of two layers of enamel applied to the primed surface (phosphating primer VL-02 (GOST 12707) and primer EP-0228 (TU 6-10-1943) with a primer layer thickness of 18-25 microns), in a moderately cold climate retains protective properties for at least 6 years and decorative properties for at least 3 years, and in a tropical climate retains protective and decorative properties for 1 year. The thickness of the complex coating after drying should be 48 - 60 microns.
Characteristics
General Specifications
Dimensions of packaged product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .