Enamel XB-16 PROTECTIVE 760
Description
Type:Enamels XB-16 and XB-16 P are a suspension of pigments and filler in a solution of perchlorovinyl and glyptal resins in a mixture of volatile organic solvents with the addition of plasticizers.
Scope of application:Enamels are intended for painting primed metal surfaces, concrete and reinforced concrete structures, as well as wooden and fabric surfaces.
Advantages:Enamels XB-16 and XB-16 P are quick–drying, dry at room temperature. Enamel coatings have high decorative and protective properties when used in atmospheric conditions and indoors. They are characterized by high water and weather resistance.
Surface preparation:Metal surfacesmust be primed with GF, VL, FL, XB, XC or EP primers before applying enamels. Surface preparation, application and drying of primers are carried out in accordance with the requirements of TNPA for a specific type of primer or in accordance with the requirements of TNPA for the product and,
GOST 9.402.
Previously painted surfaces are cleaned of fragile layers of the old coating, the old coating is removed, the entire surface is cleaned mechanically, degreased and dried. If the type of old paintwork is unknown, then it must be checked for compatibility (it is recommended to carry out a control staining of a small area of the surface). In case of swelling or peeling, the coating must be removed.
To avoid condensation of moisture, the temperature of the painted surface must be at least 3 °C above the dew point temperature.
Wooden surfacesmust be cleaned of resinous substances, dried, sanded to remove lint and dust-free. It is necessary to remove various impurities from the previously painted surface, completely remove the peeling coating, sand and dust the surface.
Concrete and reinforced concrete surfacesmust be clean, dry, durable, without cracks, loose areas, dust and dirt. If necessary, concrete and reinforced concrete surfaces are cleaned dry (with brushes) and dedusted.
Painting is not allowed during precipitation, as well as on wet and icy surfaces.
Application: Before applying the enamel, it is mixed, if necessary, diluted with solvent P-5, P-5A or P-4 (GOST 7827) in an amount of no more than 20% of the enamel weight, filtered and applied by pneumatic spraying, brush or roller.
The consumer independently selects the working viscosity depending on the production conditions (ambient temperature in the room, the diameter of the nozzle of the spray gun, the working pressure of compressed air, etc.)
In case of storage at low temperatures, the enamel is kept in a warm room before application (to avoid condensation of moisture on the painted surface during painting).
Enamels are applied in two to four layers with interlayer drying for 1 hour at a temperature of (20 ± 2) ° C and final drying for 1.5 hours at a temperature of (20 ± 2) ° C or for 2 hours at a temperature of (75 ± 2) ° C.
Before commissioning, it is recommended to keep the painted product for at least 7 days.
The thickness of the dried single–layer coating is at least 20 microns.
The consumptionof enamels for a single-layer coating is 120-160 g/m2, without taking into account the complexity of the surface to be painted, surface preparation, application method, enamel color, personnel qualifications and other factors.
The service life of the coating: the service life of the coating consisting of one layer of GF-0119 primer and two layers of enamel applied to the prepared metal surface in the conditions of UHL1 is at least 5 years.
The service life of the coating consisting of one layer of primer VL-02, two layers of primer FL-03K and four layers of enamel applied to the prepared surface under T1 conditions is at least 3 years.
The coating retains its protective and decorative properties in compliance with the requirements of the TNPA for coating, drying and operation in conditions of UHL1 and T1 climate.
Storage: Enamels should be stored in tightly closed containers, protecting them from moisture and direct sunlight. Keep away from fire.
Safety measures:Persons involved in the painting work must be provided with personal protective equipment (overalls, goggles, rubber gloves). During the painting works and after their completion, ventilate the room. The dried coating does not have a toxic effect on the environment and the human body.
Characteristics
General Specifications
Dimensions of packaged product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .