HV-124 PROTECTIVE enamel
Russia
Belarus
Description
Type:Enamels XB-124 are a suspension of pigments in a solution of medium-viscous polyvinyl chloride chlorinated resin and alkyd resin in a mixture of volatile organic solvents with the addition of a plasticizer.
Scope of application: Enamels are intended for painting primed metal surfaces, as well as wooden surfaces operated in atmospheric conditions. The norm for the indicator "Film wrinkling" is determined by the manufacturer periodically at the request of the consumer. The indicator "Shrinkage of the film" is determined for consumers using the technology of obtaining a coating with a gap in time.
Advantages:Enamel coatings have high decorative and protective properties.Enamels form a homogeneous coatingwith water, oil and gasoline resistance. XB-124 enamels applied to primed surfaces can be operated in atmospheric conditions of various climatic regions.
Surface preparation:Enamels are applied to the primed surface. Under the enamel XB-124, the use of primers is allowed according to GOST 9.401.
Surface preparation before applying primers is carried out in accordance with the requirements of the TNPA for the product, GOST 9.402 or STB ISO 12944-4.
To avoid condensation of moisture, the temperature of the painted surface must be at least 3 °C above the dew point temperature.
Application:Before applying to the surface by pneumatic and airless spraying, the enamels are diluted to a working viscosity with solvent P-4A (GOST 7827).
It is allowed to apply enamels by electrostatic spraying (in automatic chambers with the use of spark-preventing devices). At the same time, the enamels are diluted to working viscosity with the following diluents:
- diluent No. 1:
- xylene (GOST 9949, GOST 9410) – 40% (by weight);
- diacetone alcohol (TU 6-02-1045) – 25% (by weight);
- ethylcellosolv (GOST 8313) – 25% (by weight);
- butanol (GOST 5208) – 10% (by weight).
- diluent no. 2:
- solvent (GOST 10214) – 50% (by weight);
- xylene (GOST 9949, GOST 9410) – 35% (by weight);
- diacetone alcohol (TU 6-02-1045) – 15% (by weight).
The consumer independently selects the working viscosity depending on the production conditions (ambient temperature in the room, nozzle diameter of the spray gun, working pressure of compressed air, etc.).
In case of storage at low temperatures, the enamel is kept in a warm room before application (to avoid condensation of moisture on the painted surface during painting).
Enamels are applied to the primed surface in 3 - 4 layers. Drying between layers of enamel is carried out for 30 minutes at a temperature of (20 ± 2) ° C. The final drying of the coating is carried out at a temperature of 60 - 70 ° C for 3 hours or at a temperature of (20 ± 2) ° C for 24 hours.
The thickness of the dried film of a single-layer coating should be 18-23 microns.
Exposure of the coating before use for at least 7 days.
To eliminate the phenomenon of "wrinkling" that occurs due to the use of staining technology with a time gap between the application of the first and subsequent layers of XB-124 enamels, it is recommended to introduce guanide F (diphenylguanidine, hereinafter referred to as DFG) into enamels according to GOST 40-80. In this case, the specified time gap should not exceed 5 months.
The introduction of DPH is carried out by mixing enamel with a solution of DPH in acetone (GOST2768-84) immediately before use at a temperature from 15 ° C to 30 ° C. DPH is introduced in an amount of 1% of the mass of undiluted enamel (in terms of dry DPH). The preparation of the DFG solution is carried out at a temperature from 15 ° C to 30 ° C by dissolving the DFG in acetone in a ratio by weight of 1 : 9.
The consumption of enamelsfor a single-layer coating is 110-140 g/m2, without taking into account the complexity of the surface to be painted, its preparation, application method, color, personnel qualifications and other factors.
Service life of the coating:The terms of preservation of the protective and decorative properties of the coating in a temperate climate – in accordance with GOST 9.074, tropical climate – GOST 9.401, cold climate – GOST 9.404.
The service life of the coating, consisting of three layers of enamel XB-124, applied to the primed surface, in a temperate climate – at least 3 years.
The service life of the coating, consisting of four layers of enamel XB-124, applied to a surface primed with two layers of primer FL-03K (GOST 9109), in a tropical climate is at least 3 years.
The service life of the coating, consisting of three layers of enamel XB-124, applied to the surface primed with AK-070 primer (GOST 25718) or VL-02 primer (GOST 12707) with aluminum powder, in cold climates – at least 4 years.
The coating retains its protective and decorative properties in compliance with the requirements of the TNPA for coating, drying and operation in cold, temperate and tropical climates.
Storage:Enamels should be stored in tightly closed containers, protecting them from moisture and direct sunlight. Keep away from fire.
Precautions:Persons involved in the painting work should be provided with personal protective equipment according to GOST 12.1.007 and GOST 12.4.068. All work related to the preparation and application of enamels should be carried out in workshops equipped with local and general supply and exhaust ventilation. The dried coating does not have a toxic effect on the environment and the human body.
Characteristics
General Specifications
Belarus
Russia
Dimensions of packaged product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
