INVAMAT 817 electrical insulating neutral silicone sealant, 280 ml cartridge
Russia
Russia
Description
INVAMAT 817 silicone electrical insulation sealant is a one–component high-temperature neutral curing sealant specially designed for surface insulation and sealing of equipment operating in an air environment and protecting it from moisture.
Special characteristics:
- Electrically insulating – has high dielectric properties.
- Heat–resistant - operating mode from -60 ° C to +270 ° C, short-term operation at +800 ° C is possible.
- It is absolutely waterproof, resistant to atmospheric influences, temperature changes and UV radiation.
- It is resistant to UV radiation, extreme temperature changes, oils and gasoline.
- Highly elastic – able to maintain the specified properties and not collapse under severe deformations.
- Non–shrinkable - does not contain a solvent, does not decrease in volume after vulcanization.
- INVAMAT 817 sealant is applied at both low (-10 °C) and high (+60 °C) temperatures.
- High adhesion to metals, wood, concrete, brick, plaster, plastic, laminate, glass, ceramics, etc.
Adhesion and application
It has excellent adhesion without the use of a primer to most non-porous surfaces, for example, glass, tiles, ceramics, enamel, tiles, metals such as aluminum, steel, zinc and copper, with impregnated, varnished or painted wood; with alkaline substrates and porous surfaces such as concrete, lime, stone or brick masonry; with many types of plastic.
It is used for surface insulation, sealing and moisture protection of equipment and surface sealing of devices operating in vibration conditions. For sealing threaded connections of pipelines, internal systems of cold, hot water supply and heating of buildings, as well as gluing plexiglass, glass and other silicone-based materials.
These products:
- Appearance paste-like mass
- Operating mode from -60 ° C to +270 ° C (up to 800 ° C)
- Tensile strength of at least 1.3 MPa
- Adhesive strength of at least 1.0 MPa
- Relative elongation at break of at least 200%
- Electrical strength (Epr) not less than 27 kV/mm
- The dielectric constant is not more than 3.25
- The tangent of the dielectric loss angle is not more than 4.1.10-3
*These are reference data and should not be used in the preparation of specifications.
Preparation for use
The surfaces to which the sealant will subsequently be applied must be clean, dry and free of any loose materials, dust, dirt, rust, oil or other contaminants. If necessary, clean non-porous surfaces with a solvent and wipe with a clean cotton cloth. Remove the solvent with a clean, dry cloth before it evaporates. It is recommended to cover the areas adjacent to the seam with masking tapes to prevent contamination of the substrate and ensure a neat line of sealant. The masking tape should be removed immediately after smoothing the sealant.
Usage Restrictions
INVAMAT 817 does not belong to dangerous products and does not require special protective measures when used. The sealant should be used in ventilated areas, in case of contact with skin or clothing, it can be removed with white spirit. In a frozen state, it does not pose any harm to health.
Safety
During work, it is necessary to ensure good ventilation of the workplace, if the non-vulcanized silicone sealant gets into the eyes or mucous membranes, they must be thoroughly rinsed with water to avoid irritation. Keep the product out of the reach of children. Vulcanized silicone sealant is safe for health. the data provided in this technical description corresponds to the information available to us at the moment, but does not exempt the buyer from a thorough check of all materials immediately upon receipt. We have the right to change the technical characteristics of the product due to technological progress or new scientific discoveries. The recommendations do not relieve the buyer from the obligation to monitor possible violations of the rights of third parties. Recommendations are not a guarantee, express or implied, that the product meets certain goals.
Keeping
INVAMAT 817 silicone high-temperature sealant is suitable for at least 12 months when stored in a cool (below 25°C) in a dry place, protected from humidity in the original container. The expiration date of each batch is indicated on the product label. after the expiration date indicated on the package, the product does not necessarily become unusable. However, in this case, it is necessary to check all the properties of the product before using it.
Packaging and colors:
- 280 ml cartridge
- Color: Grey
Characteristics
General Specifications
Russia
Russia
Specifications
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
