Loncin G390F (A type) D25 engine
Russia
China
Description
Technical specifications:
- Maximum power, hp: 13
- Shaft location: Horizontal
- Shaft diameter, mm: 25
- Cylinder diameter, mm: 88
- Piston stroke, mm: 64
- Working volume, cm3: 389
- Compression ratio: 8.1:1
- Torque: 25.1 nm/2500 rpm.
- Ignition system: Contactless electronic
- Start: Manual start
- Fuel tank capacity, l: 6.5
- Fuel consumption, g/kWh: 340
- Engine oil volume, l: 1.1
- Dimensions, mm: 405x450x443
- Package dimensions, mm: 415x460x453
- Lighting coil: Missing
- Gearbox availability: None
- Engine Type: Gasoline 4-stroke single cylinder
- Engine Model: Loncin G390F Engine
- Maximum number of revolutions/min: 3,600
- Idle speed, rpm: 1800 ±150
- Rated power, kW: 8.2
- Fuel supply system: carburetor
- Shaft type: A type
- Shaft length, mm: 60
- Gross weight, kg: 34
Characteristics
General Specifications
China
Russia
Dimensions of product
Specifications
The maximum speed of rotation of the crankshaft with the throttle fully open under load. It affects the speed of cutting or rotation of the working organs.
-
3000-3600 rpm: Standard for 4-stroke engines of tillers, mowers and generators.
7000-9000 rpm: High-speed 2-stroke engines of mowers and light saws.
- Over 10,000 rpm: Professional chainsaws and boosted gasoline tools.
The maximum speed of rotation of the crankshaft with the throttle fully open under load. It affects the speed of cutting or rotation of the working organs.
-
3000-3600 rpm: Standard for 4-stroke engines of tillers, mowers and generators.
7000-9000 rpm: High-speed 2-stroke engines of mowers and light saws.
- Over 10,000 rpm: Professional chainsaws and boosted gasoline tools.
The minimum steady number of revolutions of the crankshaft per minute without workload. It affects easy start-up, warm-up and fuel economy.
- Low RPM (1400-1800 rpm): Large 4-stroke engines of tillers and mini tractors.
- Standard RPM (2500-2800 rpm): Compact 4-stroke lawn mower motors.
- High RPM (2800-3200 rpm): High-speed 2-stroke engines of chainsaws and trimmers.
The minimum steady number of revolutions of the crankshaft per minute without workload. It affects easy start-up, warm-up and fuel economy.
- Low RPM (1400-1800 rpm): Large 4-stroke engines of tillers and mini tractors.
- Standard RPM (2500-2800 rpm): Compact 4-stroke lawn mower motors.
- High RPM (2800-3200 rpm): High-speed 2-stroke engines of chainsaws and trimmers.
The capacity of the engine crankcase in liters for filling engine oil. Determines the amount of lubricant needed to protect the rubbing parts.
- Low volume (0.35–0.45 liters): Compact 4-stroke engines for light lawn mowers and cultivators.
- Standard volume (0.6 L): The global standard for most tillers and generators (up to 7 hp).
- Increased volume (1.1–1.6 liters): Powerful two-cylinder engines of professional equipment.
The capacity of the engine crankcase in liters for filling engine oil. Determines the amount of lubricant needed to protect the rubbing parts.
- Low volume (0.35–0.45 liters): Compact 4-stroke engines for light lawn mowers and cultivators.
- Standard volume (0.6 L): The global standard for most tillers and generators (up to 7 hp).
- Increased volume (1.1–1.6 liters): Powerful two-cylinder engines of professional equipment.
- Small volume (25-100 cm3): Lightweight trimmers, lawn mowers, motor drills and compact cultivators.
- Average volume (140-210 cm3): Universal engines for heavy lawn mowers, tillers and generators.
- Large volume (250-450+ cm3): Powerful motors for mini tractors, snow blowers and branch shredders.
- Small volume (25-100 cm3): Lightweight trimmers, lawn mowers, motor drills and compact cultivators.
- Average volume (140-210 cm3): Universal engines for heavy lawn mowers, tillers and generators.
- Large volume (250-450+ cm3): Powerful motors for mini tractors, snow blowers and branch shredders.
The capacity of the integrated gas tank in liters. Determines the duration of operation of equipment at one gas station without technological stops.
- Small tank (0.8–1.5 L): Compact garden equipment (lawn mowers, trimmers) for household plots.
- Medium tank (3.6–6.5 liters): Tillers, snow blowers and motor pumps for long-term continuous operation.
- Large tank (from 15 to 25+ liters): Stationary power plants, mini tractors and generators.
The capacity of the integrated gas tank in liters. Determines the duration of operation of equipment at one gas station without technological stops.
- Small tank (0.8–1.5 L): Compact garden equipment (lawn mowers, trimmers) for household plots.
- Medium tank (3.6–6.5 liters): Tillers, snow blowers and motor pumps for long-term continuous operation.
- Large tank (from 15 to 25+ liters): Stationary power plants, mini tractors and generators.
- Low power (1.0–2.5 kW): Light gardening equipment (lawn mowers, light cultivators).
- Average power (3.5–5.5 kW): Heavy tillers, snow blowers, motor pumps of medium capacity.
- High power (6.5 to 15+ kW): Industrial generators, mini tractors, and barrel shredders.
- Low power (1.0–2.5 kW): Light gardening equipment (lawn mowers, light cultivators).
- Average power (3.5–5.5 kW): Heavy tillers, snow blowers, motor pumps of medium capacity.
- High power (6.5 to 15+ kW): Industrial generators, mini tractors, and barrel shredders.
The specific or hourly consumption of gasoline by the engine when operating at rated power. It affects the efficiency of operation and the autonomy of the equipment.
- Low consumption (0.3–0.6 kg/h): Low-power lawn mower and light cultivator engines.
- Average consumption (1.0–1.8 kg/h): Standard 6.5–9 hp tillerblock motors for plowing and cargo transportation.
- High consumption (from 2.5 to 4.5+ kg/h): Powerful two-cylinder power units and generator stations.
The specific or hourly consumption of gasoline by the engine when operating at rated power. It affects the efficiency of operation and the autonomy of the equipment.
- Low consumption (0.3–0.6 kg/h): Low-power lawn mower and light cultivator engines.
- Average consumption (1.0–1.8 kg/h): Standard 6.5–9 hp tillerblock motors for plowing and cargo transportation.
- High consumption (from 2.5 to 4.5+ kg/h): Powerful two-cylinder power units and generator stations.
- Low torque (4-9 Nm): For mowing lawns and regular mowing of grass cover.
- Average moment (10-14 Nm): Cultivation of heavy soil, plowing of vegetable gardens with tillers.
- High torque (from 15 to 30+ Nm): Industrial snow removal, uprooting and heavy plowing.
- Low torque (4-9 Nm): For mowing lawns and regular mowing of grass cover.
- Average moment (10-14 Nm): Cultivation of heavy soil, plowing of vegetable gardens with tillers.
- High torque (from 15 to 30+ Nm): Industrial snow removal, uprooting and heavy plowing.
- Short stroke (35-45 mm): High-speed 2-stroke and compact 4-stroke trimmer motors.
- Medium stroke (50-55 mm): Universal 4-stroke engines with even thrust over the entire speed range.
- Long stroke (from 60-70+ mm): Long-stroke traction motors for heavy arable machinery and tillers.
- Short stroke (35-45 mm): High-speed 2-stroke and compact 4-stroke trimmer motors.
- Medium stroke (50-55 mm): Universal 4-stroke engines with even thrust over the entire speed range.
- Long stroke (from 60-70+ mm): Long-stroke traction motors for heavy arable machinery and tillers.
The inner diameter of the cylinder liner. In a compartment with a piston stroke, it determines the total volume of the engine and the density of power removal.
- Small diameter (35-50 mm): Trimmers, chainsaws, and compact gasoline mowers.
- Average diameter (68-70 mm): The most common cylinder size for 6.5–7 hp single-axle motors
- Large diameter (from 77 to 90+ mm): Heavy single- and double-cylinder engines with high power.
The inner diameter of the cylinder liner. In a compartment with a piston stroke, it determines the total volume of the engine and the density of power removal.
- Small diameter (35-50 mm): Trimmers, chainsaws, and compact gasoline mowers.
- Average diameter (68-70 mm): The most common cylinder size for 6.5–7 hp single-axle motors
- Large diameter (from 77 to 90+ mm): Heavy single- and double-cylinder engines with high power.
The outer diameter of the output crankshaft for mounting a pulley or centrifugal clutch. It affects the selection of transmission mechanisms and belts.
-
19.05 mm (3/4"): A popular standard for light and medium engines of tillers and pump assemblies.
- 20.0 mm: European and Asian industry-wide standard for cultivators and generators.
- 25.4mm (1") and keyed/tapered: Heavy engines with a capacity from 9 to 20+ hp
The outer diameter of the output crankshaft for mounting a pulley or centrifugal clutch. It affects the selection of transmission mechanisms and belts.
-
19.05 mm (3/4"): A popular standard for light and medium engines of tillers and pump assemblies.
- 20.0 mm: European and Asian industry-wide standard for cultivators and generators.
- 25.4mm (1") and keyed/tapered: Heavy engines with a capacity from 9 to 20+ hp
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
