Diesel welding generator in casing TSS DGW-300ES
Russia
Russia
Description
Appointment
Welding diesel generator TSS DGW-300ES in a super quiet casing, designed for professional Manual Arc Welding. It has an additional function - power supply of electric consumers.
Features of the model
- Work with electrodes 1-6 mm. For welding with 1-3 mm electrodes, it is recommended to connect a welding inverter device to the power plant, which is included in the delivery package.
- The engine is diesel, 4-stroke, V-shaped, two-cylinder, air-cooled, with direct fuel injection. The motor life of the engine is more than 2000 hours. All engines are pre-run-in before installation on the generator and are fully ready for operation. Each engine has a unique serial number.
- The super-quiet protective casing, specially designed for this series of generators, is completely sheathed with noise-absorbing material from the inside, allows you to reduce the noise level to 67 dB and work without causing discomfort to the operator and others.
- The alternator of alternating current is single-phase, synchronous, brush. The alternator is 100% copper, of a special type for welding operations.
- The BOSCH fuel injection injector ensures efficient operation of the fuel system, easy engine start and reduced fuel consumption.
- The AVR (Automatic Voltage Regulator) system of automatic voltage control - maintains the set voltage and guarantees the supply of high-quality current.
- The fuel system enables automatic removal of air jams and eliminates the need to pump the fuel line after long periods of downtime.
- A 36 Ah battery and a built-in electric starter ensure a comfortable and easy start of the engine with a Key.
- Automatic recharging of the battery while the generator is running.
- The built-in 12 V charger is located on the control panel and with the help of terminals allows you to charge third-party batteries with a constant current of 8.3 A. A 10 A short-circuit fuse.
- Metal fuel tank of increased volume, equipped with a Fuel Level Indicator.
- Stable operation of the generator at t° -15 + 40
- Strong metal handles, which can also be used to lift the generator. Rotating transport wheels made of solid rubber with a steel base on bearings. The wheels are puncture resistant and do not require inflating or maintenance during the entire service life.
- Built-in overload protection protects against excessive load on the alternator, and also eliminates cases of overheating during prolonged use. Smart protection protects the generator from short circuit.
- Emergency Stop due to low oil level. An Oil Pressure Sensor is installed on the engine with an engine stop system if the minimum oil level is reached. Prolongs the service life and eliminates the reduction of engine life due to oil starvation. At the same time, a lamp on the control panel lights up signaling a low oil level.
- The SmartGen HGM501 professional Multifunction Display displays all the main parameters of the generator operation: Current Strength, Load, Voltage, Current Frequency, and Used Motorcycle Hours for timely maintenance.
- Two 230V/16A sockets for connecting energy consumers.
- The design of the casing is designed in such a way that it protects all elements of the generator during operation and transportation, while maintaining convenient access through doors and hatches to the units of the unit, during routine maintenance or repair work. The motor and alternator are mounted on Vibration-bearing Supports.
- Welding current with smooth adjustment up to 300 A allows for long-term (PV-80%) welding with a 6 mm electrode without overloading or overheating the generator.
- Remote adjustment of the welding current with a 10 m control cable is included in the delivery package. Greatly facilitates the work of the welder.
- Quick-release connections of welding cables of the same type as on welding sources operating from the mains, allow you to connect a cable with a cross section of up to 70mm.
- The casing is painted by Powder Coating, which prevents the appearance of corrosion.
Specifications:
- Recommended oil type - SAE10W30, SAE10W40
- Start type - electric start
- Engine model - SV292F
- Rated power, kVA - 3.5
- Maximum power, kVA - 4
- Power factor - 1
- Version - noise-proof casing
- The type of welding current is constant
Equipment
- Welding Generator
- 2.5m cable with ground terminal
- Electrode holder
- Transport wheels
- Oilcan
- Tool Kit
- Welding inverter machine TSS SAI-140
- User Manual
- Warranty card
Security guarantee
The equipment is manufactured in accordance with the requirements of the European Standard
EN 60974-1:2012 on the design and safety of arc welding power supplies. Complies with the requirements of the technical regulations of the Customs Union TR CU 004/2011 "On the safety of low-voltage equipment" and
TR CU 020/2011 "Electromagnetic compatibility of technical means".
Quality control
Characteristics
General Specifications
Russia
Russia
Dimensions of product
Specifications
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
