Diesel generator TSS AD-200S-T400-2RPM5 PROF in a weatherproof casing
Russia
Russia
Description
The impressive advantages of a 200 kW diesel generator set in a weatherproof casing with TSS Prof AVR are fully revealed during long-term operation in the mode of the main power supply source, when fuel consumption, reliability, duration of service intervals, adaptability to load reception come to the fore. TTSt 280TS CTA PROF is designed by specialists of the engineering center of TSS Group with full consideration of the needs of domestic customers and operating conditions. The TSS Prof series is a real and affordable alternative to European diesel generators of medium and higher price ranges, which is in no way inferior to equipment of famous brands, but having a much lower cost.
The technological capabilities of the TSS GC production complex allow us to mass produce modern models of generator sets with quality that meets international industry standards, which is documented by certificates from such advanced developers as Moteurs Baudouin (France), Yuchai (China), Weichai (China), Sincro (Italy), Mecc Alte (Italy) and others.
Advantages:
- The best price/quality ratio among the DGS produced by TSS Group.
- The possibility of using both as the main and as a backup power supply source.
- A high degree of reliability and durability of operation due to the use of high-quality and high-tech components and assemblies.
- Time-tested models of diesel engines.
- A high degree of engine pick-up in terms of simultaneous load reception.
- Effective start-up in the cold season.
- Low specific consumption of fuel and engine oil.
- Unpretentiousness to the quality of Russian diesel fuel.
- Low noise and vibration levels.
- Low cost of consumables.
- Availability of a large warehouse program of consumables and spare parts with minimum delivery time to the customer's facility.
- A wide range of manufacturers of alternators.
- Convenient and intuitive interface for managing the operation of the DSU due to the use of modern multifunctional DSU control controllers manufactured by Lovato, SmartGen with a multilingual menu, including a menu in Russian.
- Testing of each DSU under load before sending to the customer for at least two hours.
- Compliance with modern requirements regarding the content of harmful substances in exhaust gases.
- Compliance with Russian standards.
- Extended warranty for up to 3 years.
TSS Diesel TDP 286 6LTE Diesel Engine (Steyr Technology)
The engine is designed specifically for generation and optimized for maximum efficiency in operation at 1,500 revolutions per minute required to generate alternating electric current with a frequency of 50 Hz, used in many countries around the world, including Russia, Belarus, Kazakhstan, Kyrgyzstan and Armenia. The engine has an in-line design of 6 cylinders and is equipped with an electronic speed controller, which allows its operation in parallel, as part of a scalable energy complex.
The engine is manufactured using Steyr technology (Austria):
- The engine is manufactured using Steyr technology (Austria)
- Excellent price-quality ratio
- Liquid cooling
- Direct fuel injection
- Turbocharging with intermediate air cooling
- Electronic rotation speed control +/- 1%
- High quality compared to other Chinese suppliers in the Prof line
- Engine components are manufactured at the world's leading and Chinese FLEETGUARD, WEICHAI, LONGBERG, DELPHI, HOLSET, TYEN plants
- with a maximum power of 258 kW;
- 6 cylinders, in-line arrangement of cylinders, 4-stroke;
- turbocharged and intercooled air intake system;
- 9.7 liters is the working volume of the engine.
Synchronous generator 200 kw TSS SA-200 high quality electric current
The synchronous three-phase brushless generator is designed for use in diesel and gas piston generator sets focused on the power supply of the most critical facilities sensitive to the characteristics of the supplied current. The voltage autoregulator (AVR) used in its design ensures an adjustment accuracy of 0.5%, the housing, and the protection class of the windings corresponds to IP 21. This is a reliable and unpretentious single-column generator, which has been used for decades as part of diesel generator sets of the TSS brand.
TTSt 280TS CTA PROF control system in an outdoor casing with autorun
The 200 kW diesel generator of this series is normally equipped with Smartgen HGM-6120 or Lovato RGK-600 controllers, which allows you to optimally unlock the potential of the diesel engine and synchronous generator. Both controllers allow you to control many parameters of the station's operation and are configured in factory conditions for full readiness for operation in all passport modes.
The Smartgen HGM-6120 is a reliable and time-tested multifunctional controller with a Russified interface and many parameter settings. It is the most common in Russia and is well known to DSU operators.
Design features of a 200 kW diesel power plant in a weatherproof casing and an AVR TTSt 280TS CTA
Unlike the basic, open DSU, this model is equipped with a durable metal casing designed to provide reliable protection from precipitation, unauthorized access to equipment and reduce noise from an operating installation. An all–weather casing or hood is the most affordable, budget-friendly solution in the field of protected power plant layout, providing a minimum level of equipment protection and slightly reducing noise levels. The diesel power plant in a weatherproof casing is designed for installation on a flat and hard surface in the open air, and is ready for operation immediately after connecting the load and refueling. The weatherproof casing is equipped with everything necessary for convenient movement with the help of a lift and a crane.
TSS diesel generator sets are supplied fully equipped, filled with technical fluids in the required volume and ready for operation. The engine, cooling radiator, and generator are mounted on a sturdy rigid steel frame with an integrated fuel tank. All diesel generator sets undergo verification tests for at least 2 hours of operation.
The 200 kW diesel power plant of the Prof series has a warranty period of 3 years from the date of delivery, or an operating time of 2000 hours, depending on which event comes first. Spare parts and consumables are always available.
The presence of an extensive network of partner service centers, represented on the territory of Russia, the Republic of Belarus and Kazakhstan, allows you to quickly and timely perform maintenance.
Specifications:
- Rated power, kW - 200
- Rated power, kVA - 250
- Maximum power, kW - 220
- Maximum power, kVA - 275
- The power factor is 0.8
- Voltage (V) - 400/230
- Number of phases - 3
- Frequency, Hz - 50
- Rated current (A) - 360
- Cooling system volume (l) - 67
- Fuel tank capacity (l) - 535
- Fuel consumption at 50% power l/h - 30.7
- Fuel consumption at 75% power l/h - 43
- Fuel consumption at 100% power l/h - 55.9
- Autonomous operation at 75% load without refueling (h) - 13
- Degree of automation - 2 (autorun)
- Emergency stop system - yes
- Fuel level sensor - yes
- Installed battery Ah/V - 2x120/24
- Version - Weatherproof cover
- Silencer - industrial
- Radiator dimensions (rast. from the floor, H, W, mm) - 600, 890x900
- Overall dimensions (L;W;H; mm) - 3300x1400x2153
- Engine Manufacturer - TSS Diesel
- Engine - TSS Diesel TDP 235 6LTE (Steyr Technology)
- Maximum engine power, kW - 258
- Number of cylinders - 6
- The arrangement of the cylinders is in-line
- Engine displacement (l) - 9.726
- Air intake system - turbocharged and intercooled
- The speed control is electronic
- Recommended oil type is SAE 15W40/10W40, API CH-4
- Oil system capacity (L) - 28
- Generator power, kW - 200
- Excitation system - SHUNT
- Generator efficiency, % - 91
- The winding step is 2/3
- The number of support bearings is 1
- Winding protection class - IP23
- Degree of insulation - H
- Voltage adjustment accuracy (±%) - 1
- Voltage regulator - yes
- The language of the controller interface is Russian
- Weight, kg - 2270
- Complete set - muffler, fuel tank, battery, power supply with digital panel, oil and coolant locking station
- Frame height (mm) - 300
- Warranty period (months) - 36 months/2000 hours
Characteristics
General Specifications
Russia
Russia
Dimensions of product
Specifications
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
