Diesel power plant AD-120-Fregat in a casing with an AVR
Description
Diesel power plants with a capacity of 120 kW are designed on the basis of turbocharged water-cooled diesel engines of various volumes and capacities produced by leading domestic and foreign manufacturers.
A large assortment of DSU and DES in the "Frigate" catalog section allows you to choose a diesel generator set with optimal parameters, ideally suited for the implementation of certain tasks. As well as universal diesel generator equipment capable of performing a wide range of diverse tasks.
Pre-sale preparation
It includes two-hour bench tests under different loads and a short-term test with 10% overload of the declared capacity.
Areas of application
The diesel generator set is intended for use as the main or backup source of three-phase power supply with a voltage of 230/400 V and a frequency of 50 Hz.
Operating recommendations
Overload within acceptable values should not exceed 10% of the rated power and last no more than 1 hour for every 8 hours of operation. But no more than 200 hours per year.
The recommended load of a diesel power plant when used as the main power source is 75-90% of the rated power. The operation of DES with a load of up to 25% is not allowed for longer than 5 minutes.
Configuration options:
- DES open on the frame;
- in a noise-proof casing;
- in a container of the "North" type;
- mobile on the chassis, in a noise-proof casing.
Main Features:
- Rated power, kW 120
- Rated power, 150 kVA
- Maximum power, kW 132
- Maximum power, 165 kVA
- Power factor, cos φ 0.8
- Voltage, 400 V
- Number of phases 3
- Frequency, Hz 50
- Rated current, A 217
- Resource before major repairs, moto-hour 10000
Engine:
- Engine model R6105IZLD
- Engine power, kW 146
- Liquid cooling system
- Cooling system capacity, l 22
- Oil system capacity, l 18
- Rotation speed, rpm 1500
- Number of cylinders 6
- The order of operation of cylinders 1-5-3-6-2-4
- The arrangement of the cylinders is in-line
- Engine stroke 4
- Engine displacement, l 7,1
- Turbocharging air intake system with ONV
- Cylinder diameter, mm 105
- Piston stroke,mm 135
- Compression ratio in cylinders 16:1
- The speed controller is mechanical
- Supply voltage, V 24
- Starting device, In the electric starter
- Specific fuel consumption, g/kWh ≤224
- Fuel filter type disposable filter
- Recommended oil type SAE 15W40/10W30
- Oil Filter Type disposable filter
- Specific oil consumption, g/kWh ≤1.63
- Noise level, dB ⩾80
Fuel system:
- Type of fuel diesel
- Fuel tank capacity, hour 8-10
- Fuel consumption at 50% power, l/h 16.5
- Fuel consumption at 75% power, l/h 25
- Fuel consumption at 100% power, l/h 33
Electrical system:
- Electric starter
- There is an oil pressure sensor
- There is a coolant temperature/overheating sensor
- There is a fuel level sensor
- There is an automatic stop device
- There is an emergency stop button
- There is a charging generator for your own needs
- There is a voltage regulator relay
Generator:
- Generator type synchronous brushless
- Number of generator phases 3
- Constant power, kW 120
- SHUNT excitation system
- Generator voltage, 400 V
- Rated current of the generator, A 217
- Generator frequency, Hz 50
- Efficiency, % 94
- Winding step 2/3
- Number of support bearings 1
- Winding protection class IP21
- Degree of isolation H
- Power factor (cos φ) 0.8
- Voltage adjustment range (±%) 5
- Electronic voltage regulator
- Automatic voltage regulator (AVR) is
- There are current transformers
Controller:
- The controller interface language is Russian
- Operating temperature range (°C) -15+55
- There is a delay function for starting and stopping
- The possibility of starting from an external signal is
- There is a possibility of working together with the automatic input of the reserve
- Controller voltage, 8~35 V DC
- There is a temperature control
- There is an oil pressure control
- There is a fuel level control
- There is a phase-by-phase voltage control
- There is a phase-by-phase current control
- Power control is
- There is a frequency control
- There is a voltage control of the charging generator
- There is a control of the number of launches
- There is a control over the running time of the moto hours
- Control of the generated power yes
Equipment:
- battery,
- muffler,
- technical documentation
Characteristics
General Specifications
Specifications
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .