Diesel generator in a container TSS AD-320S-T400-2RNM5 PROF
Russia
Russia
Description
The impressive advantages of a container diesel generator set with a 320 kW AVR of the TSS Prof series are fully revealed during long-term operation in the mode of the main power supply source, when fuel consumption, reliability, duration of service intervals, adaptability to load reception come to the fore. TSS TTSt 440TS CGA PROF is designed by specialists of the engineering center of TSS Group with full consideration of the needs of domestic customers and operating conditions. The TSS Prof series is a real and affordable alternative to European diesel generators of the middle and higher price ranges, which is in no way inferior to equipment of famous brands, but having a much lower cost.
The technological capabilities of the TSS GC production complex allow us to mass produce modern models of generator sets with quality that meets international industry standards, which is documented by certificates from such advanced developers as Moteurs Baudouin (France), Yuchai (China), Weichai (China), Sincro (Italy), Mecc Alte (Italy) and others.
TTSt 440TS CGA PROF is a ready-made energy solution for building reliable power supply systems for the most critical facilities, including continuous cycle production, healthcare and education institutions, enterprises of various industries, shopping and entertainment centers, hotel complexes.
The TSS TTSt 440TS CGA PROF diesel power plant produces 400 kVA (320 kW) of main power and 440 kVA (352 kW) of reserve power. New technologies embodied in the TSS Diesel engine (Steyr Technology) allow this model to operate with very economical fuel consumption in all major modes:
- at a load of 100% - 86.2 l/h;
- at a load of 75% - 64.8 l/h;
- at a load of 50% - 43.1 l/h.
Advantages:
- The best price/quality ratio among the DGS produced by TSS Group.
- The possibility of using both as the main and as a backup power supply source.
- A high degree of reliability and durability of operation due to the use of high-quality and high-tech components and assemblies.
- Time-tested models of diesel engines.
- A high degree of engine pick-up in terms of simultaneous load reception.
- Effective start-up in the cold season.
- Low specific consumption of fuel and engine oil.
- Unpretentiousness to the quality of Russian diesel fuel.
- Low noise and vibration levels.
- Low cost of consumables.
- Availability of a large warehouse program of consumables and spare parts with minimum delivery time to the customer's facility.
- A wide range of manufacturers of alternators.
- Convenient and intuitive interface for managing the operation of the DSU due to the use of modern multifunctional DSU control controllers manufactured by Lovato, SmartGen with a multilingual menu, including a menu in Russian.
- Testing of each DSU under load before sending to the customer for at least two hours.
- Compliance with modern requirements regarding the content of harmful substances in exhaust gases.
- Compliance with Russian standards.
- Extended warranty for up to 3 years.
TSS Diesel TDP 350 6LTE Diesel Engine (Steyr Technology)
The engine is designed specifically for generation and optimized for maximum efficiency in operation at 1,500 revolutions per minute required to generate alternating electric current with a frequency of 50 Hz, used in many countries around the world, including Russia, Belarus, Kazakhstan, Kyrgyzstan and Armenia. The engine has an in-line design of 6 cylinders and is equipped with an electronic speed controller, which allows its operation in parallel, as part of a scalable energy complex.
- The engine is manufactured using Steyr technology (Austria);
- Excellent price-quality ratio.
- maximum power 385 kW;
- 6 cylinders, in-line arrangement of cylinders, 4-stroke;
- turbocharged and intercooled air intake system;
- 12.6 liters - engine displacement;
- electronic speed control.
Synchronous generator 320 kw TSS SA-320 - high quality electric current
The synchronous three-phase brushless generator is designed for use in diesel and gas piston generator sets focused on the power supply of the most critical facilities sensitive to the characteristics of the supplied current. The voltage autoregulator (AVR) used in its design ensures an adjustment accuracy of 0.5%, the housing, and the protection class of the windings corresponds to IP 21. This is a reliable and unpretentious single-column generator, which has been used for decades as part of diesel generator sets of the TSS brand.
TTSt 440TS CGA PROF control System
TTST 440 TS CGA PROF of this series are equipped with Smartgen HGM-6120 or Lovato RGK-600 controllers, which allows you to optimally unlock the potential of a diesel engine and a synchronous generator.
Both controllers allow you to control many parameters of the station's operation and are configured in factory conditions for full readiness for operation in all passport modes.
Equipping a container diesel power plant with the 2nd degree of automation (automatic start-up) 320 kW TTSt 440TS CGA PROF
The container diesel power plant with an AVR of 320 kW is equipped in accordance with the requirements of automation of the second degree, which implies the integration of additional subsystems that significantly expand the possibilities of autonomous operation of a diesel power plant. The AVR unit (automatic reserve input) provides automatic start of the DES in the event of a power outage of the main power supply network and stops when the supply of electricity from the main source is resumed. All load switching between power sources is performed automatically, without the participation of management personnel. The electric heating system of the engine block ensures the constant readiness of the DSU to start even in the cold season, using an external power supply network as a power source. The module for automatic recharging of on-board batteries maintains constant readiness of starter batteries throughout the entire period of operation of the equipment.
A power plant in a container with an autorun 320 kW TTSt 440TS CGA PROF - Maximum autonomy and full protection of DES
This model is supplied in a container design, which allows its long-term operation in the most severe climatic conditions, from the high latitudes of the Arctic to the scorching heat of the southern steppes of Russia and Kazakhstan. Commercially available TSS block containers, even in the basic design, are designed to operate the equipment placed in them at an external temperature range from -40C ° to +40C°, and a special "Arctic" series allows comfortable operation of DES and at -60C °. The container DSU can be equipped with additional fuel tanks, engine oil, various additional modules and systems that expand the standard functionality of the equipment.
Important information from the manufacturer
Specialists of the engineering center and the TSS Group of Companies' production complex implement a set of measures aimed at improving the operational characteristics of their products. In this regard, the performance indicators of the TSS Prof diesel generator and its images shown on the website pages and in catalogs may differ from those stated.
Specifications:
- Rated power, kW - 320
- Rated power, kVA - 400
- Maximum power, kW - 352
- Maximum power, kVA - 440
- The power factor is 0.8
- Voltage (V) - 400/230
- Number of phases - 3
- Frequency, Hz - 50
- Rated current (A) - 578
- The volume of the cooling system (l) is 65
- Fuel tank capacity (l) - 956
- Fuel separator - yes
- Fuel consumption at 50% power l/h - 43.1
- Fuel consumption at 75% power l/h - 64.8
- Fuel consumption at 100% power l/h - 86.2
- Autonomous operation at 75% load without refueling (h) - 14.8
- Degree of automation - 2 (autorun)
- Emergency stop system - yes
- Fuel level sensor - yes
- Installed battery Ah/V - 2*120/12
- Execution - container
- Silencer - industrial
- Radiator dimensions (rast. from the floor, H, W, mm) - 400, 1100x1200
- Overall dimensions (L;W;H; mm) - 4500x2300x2675
- Engine - TSS Diesel TDP 350 6LTE (Steyr Technology)
- Maximum engine power, kW - 385
- Number of cylinders - 6
- The arrangement of the cylinders is in-line
- Engine displacement (l) - 12.6
- Air intake system - turbocharged and intercooled
- The speed control is electronic
- The recommended oil type is SAE 15W40/10W40, API CH-4
- Oil system capacity (L) - 32
- Generator power, kW - 322
- Excitation system - SHUNT
- Generator efficiency, % - 93.7
- The winding step is 2/3
- Number of support bearings - 1
- Winding protection class - IP21 (IP23)
- Insulation degree - H
- Voltage adjustment accuracy (±%) - 1
- Voltage regulator - yes
- The language of the controller interface is Russian
- Weight, kg - 5050
- Complete set - muffler, fuel tank, battery, power supply with digital panel, oil and coolant locking station
- Frame height (mm) - 400
- Warranty period (months) - 36 months/2000 hours
Characteristics
General Specifications
Russia
Russia
Dimensions of product
Specifications
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
