Polyvinyl acetate homopolymer coarse dispersion PVAD grade DF 51/15 VP (plasticized) F.5,0
Russia
Belarus
Description
Type:coarse homopolymer polyvinyl acetate dispersion (PVAD) is a product of polymerization of vinyl acetate in an aqueous medium in the presence of an initiator and a protective colloid of polyvinyl alcohol. Depending on the composition and purpose , the following dispersion grades are produced:
- non-plasticized - D 50N, D 51C, D 51B;
- plasticized - DF 50/5N; DF 51/10S; DF 51/10SL; DF 51/15S; DF 51/15V; DF 51/15VP; DF 47/50V.
In the designation of brands, the first two digits indicate the minimum dry residue content before the plasticization of the dispersion, and the subsequent ones indicate the content of the plasticizer in terms of dry residue as a percentage.
Alphabetic indexes to digits denote:
D - dispersion; F - dibutyl phthalate or diisobutyl phthalate.
Letter indexes after the numbers indicate:
H – low–viscosity; C – medium–viscosity; B - high-viscosity; L - paint and varnish; P – printing.
Scope of application:
PVAD is used as an adhesive in the production of binding and pamphlet work, in the manufacture of various leather goods, for gluing facing metal and facade tiles, as an appreting additive for finishing fabrics, in the manufacture of starching agents in household chemicals, as a binder for polymer cement, polymer concrete and seamless floor coverings, as adhesives for paper, cardboard, wood, plywood, cotton fabrics, in the production of containers and packaging made of paper and cardboard, as a binder in water-dispersion paints.
The main recommended areas of application are brand dispersions
Application:carefully remove before use during layering. If a film forms on the surface during storage, it should be removed before use. The bonding surfaces must be dry and clean. Apply the PVA dispersion in a thin layer on one of the surfaces to be glued, connect with the other by combining the edges to press.
Instructions for plasticizing dispersion:the plasticization of the dispersion is carried out in a capacitive apparatus made of stainless steel, aluminum or enameled, equipped with a stirring device (a frame or anchor type agitator with a circumferential mixing speed of 3-5 m / s) at a temperature of 20-30 ° C. It is allowed to carry out plasticization at a temperature of 50 ° C. An unpasticized dispersion is loaded into the apparatus, then, with the agitator running, a plasticizer is fed in portions or continuously for 1-2 hours. After the end of loading the entire amount, mixing is continued for 3 to 4 hours.
Transportation and storage:according to GOST 9980.4 and GOST 9980.5. Plasticized dispersion is transported at a temperature not lower than plus 5 ° C, non–plasticized - not lower than minus 40 ° C. In winter, the plasticized dispersion is transported in tanks with a thermal insulation coating according to GOST 10674. The duration of transportation of the non-plasticized dispersion at a temperature below 0 ° C should not exceed one month.
The plasticized dispersion is supplied separately with the plasticizer in winter. PVAD should be stored in tightly closed containers in warehouses at a temperature of at least plus 5 ° C. The frozen non-plasticized dispersion is thawed in a warm room or heated in a container to a temperature no higher than 80 ° C without the use of an open flame and then thoroughly mixed.
Precautions:rooms designed to work with dispersion must be equipped with local and general exchange ventilation. Work with the dispersion plasticized with dibutyl phthalate or diisobutyl phthalate, in direct contact, is carried out in rubber gloves. PVAD is fire- and explosion-proof.
Warranty period: 12 months from the date of manufacture.
Characteristics
General Specifications
Belarus
Russia
Dimensions of packaged product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
