HYUNDAI L 5100M Petrol Lawn Mower
Russia
China
Description
The HYUNDAI L5100M gasoline lawn mower is a limited edition series for the European market. Unlike its brother in the L5100S line, the lawn mower is not self-propelled and without a grass collector, but it is more squat and maneuverable. It also has a mulching function.
Features:
- Enlarged 7 and 10 inch wheels ensure confident movement of the lawn mower. The car also holds the grip well on hilly stretches, as well as on perfectly flat ones. The large diameter makes it easy to maneuver, avoid obstacles. The width of the wheels does not spoil the grass and does not leave a deep rut. Long-life ball bearings ensure free rotation.
- The working handle is covered with a corrugated material that is pleasant to the touch, eliminates slipping even wet hands, helps to carry out the tightest grip. The control knobs are located here. The handle can be adjusted in height, adjusting to the height of the user. Screw-on secure clamps hold the selected position. During storage, the handle can be folded in half.
- There is a special standard diameter fitting on the bottom of the deck. At the end of the work, the operator connects a water hose to it, then turns on the engine of the lawn mower and quickly washes away the remnants of vegetation from the bottom of the mower. Water pours under high pressure, thereby easily cleans the deck, air knife, wheels.
- The lawn mower starts from a slight jerk of the operator by the exhaust cable. For a confident start of the crankshaft, there is a fuel pump in the design, which helps to pump fuel into the carburetor and enrich it with the help of a throttle valve. Fast start-up takes place at any ambient temperature or degree of humidity, due to an advanced start-up system.
- There is a side discharge. A separate mode allows the operator to carefully trim the edges of lawns and flower beds, as well as cut long grass along paths and fences. The convenience of the side discharge lies in its quick adjustment, plus, with its help, you can harvest hay for feeding pets. Switching modes takes a minimum of time and can take place right on the work site.
Technical specifications:
- The presence of a motion drive is not present.
- The body material is steel.
- The cutting knife is 2-bladed.
- Lateral ejection - yes.
- The diameter of the front/rear wheels is 177.8/254 mm.
- The type of movement is self–propelled (or not self-propelled) - no.
Characteristics
General Specifications
China
Russia
Dimensions of packaged product
Specifications
The level of the knife above the ground can be changed. Wheeled lawn mowers usually have at least two mowing height levels ranging from 20 to 80 mm.
Lawn mowers can have a different way of adjusting the mowing height:
- manual adjustment to rearrange the wheels to different heights, during such an operation, the lawnmower will have to be stopped.
- central adjustment with a single lever, the mowing height can be changed, while stopping the engine is not necessary, since the height of the knife can be adjusted directly during operation, depending, for example, on the terrain.
The level of the knife above the ground can be changed. Wheeled lawn mowers usually have at least two mowing height levels ranging from 20 to 80 mm.
Lawn mowers can have a different way of adjusting the mowing height:
- manual adjustment to rearrange the wheels to different heights, during such an operation, the lawnmower will have to be stopped.
- central adjustment with a single lever, the mowing height can be changed, while stopping the engine is not necessary, since the height of the knife can be adjusted directly during operation, depending, for example, on the terrain.
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
