The device for butt welding of HDPE pipes PROSVAR With 315 CNC
Russia
Russia
Description
PROSVAR C 315 CNC is an automatic machine for welding polymer pipes and fittings with a diameter of 90-315 mm. The equipment belongs to the professional-class equipment in terms of automation, productivity, and accuracy of operations performed. The model is widely used by specialized specialists during the installation or repair of engineering communications (gas, water supply, sewerage, etc.).
Functionality
The model provides the possibility of welding polymer materials at a temperature of 0-300 ° C. The complete set of the device makes it possible to use it for connecting pipes with a diameter of 90-315 mm.
The operation of the device is fully automated, which eliminates the influence of the human factor on the result.
The manufacturer has provided a number of design solutions to improve the safety of operation and functionality of the equipment. The hydraulic unit is equipped with an electric shut-off device, protected by a metal casing with additional stiffeners that protect the internal elements from dust and moisture.
To increase operator safety, automatic emergency shutdown of the device is provided, and the ability to control all equipment operation parameters using electronics.
Equipment:
The standard equipment of the PROSVAR With 315 CNC provides for the supply of the following elements:
- centralizer;
- electric end face;
- heating element;
- device for automatic removal of the heating element;
- CNC hydraulic unit (high degree of automation);
- sets of inserts and fixing bolts with a diameter of 90 – 280 mm;
- equipment assembly tools;
- hoses for connecting hydraulic equipment;
- a case for transportation and storage;
- operating instructions for the equipment.
Appearance and ease of use
A distinctive feature of the model is the increased technical life of all its structural elements. This ensures the device's resistance to external influences, which is important when working on an existing construction site.
Special attention is paid to increasing the mechanical resource. The welding machine is designed for long-term active operation in harsh conditions. The following design solutions are provided for this purpose:
- production of inserts and clamps of the centralizer using injection molding technology using aluminum alloy;
- installation of powerful hydraulic cylinders with fluoroplast piston rings, which are highly resistant to wear;
- all structural elements are resistant to vibration caused by facing;
- Hardened steel is used for the production of end cap sprockets, which is characterized by increased resistance to deformation and damage.
For the convenience of using the device, a special mechanism is provided for the rapid separation of the pipe section stuck to the heating surface. This helps to increase the productivity of installers and improve its quality. Even with the pump turned off, the accumulator is able to maintain system pressure up to 100 bar.
A solid cast aluminum structure is used to manufacture the heating elements of the PROSVAR C 315 CNC. This ensures a uniform temperature distribution and a significant increase in the life of the part. The 5-meter power cable and the centralizer's wheels make it possible to move the device around the site, ensuring convenient operation.
Equipment power supply
The electric welding machine is connected to a 220 V (50 Hz) mains. There are no special requirements for the power supply of the installation, so it can operate without restrictions from a household or industrial network. The electronics control the operating characteristics of the equipment, so the welding quality does not change under voltage drawdown conditions, but if there is such a problem, the use of a stabilizer is recommended..
The characteristics of the 315 CNC WELD allow the machine to be used to connect polymer pipes made of all types of polyethylene and polypropylene. The manufacturer has provided an optimal heating range for the work surface to perform such tasks. The welding parameters are electronically controlled with high precision.
Characteristics The device for butt welding of HDPE pipes PROSVAR With 315 CNC
General Specifications
Russia
Russia
Dimensions of packaged product
Specifications
This parameter characterizes the energy consumption of the equipment and determines its performance when welding pipes of various diameters
- Low–power models (0.6-2 kW) are hand-held devices for socket welding of domestic water supply systems
- High power (up to 61.5 kW) is typical for large butt machines working with large diameter main pipes
- The higher the value, the faster the heating element reaches the operating temperature after switching on
- The power reserve ensures stable heating when working outdoors, compensating for heat loss from wind and cold
- Defines the requirements for the power supply (a regular 220 V outlet or an industrial 380 V network)
This parameter characterizes the energy consumption of the equipment and determines its performance when welding pipes of various diameters
- Low–power models (0.6-2 kW) are hand-held devices for socket welding of domestic water supply systems
- High power (up to 61.5 kW) is typical for large butt machines working with large diameter main pipes
- The higher the value, the faster the heating element reaches the operating temperature after switching on
- The power reserve ensures stable heating when working outdoors, compensating for heat loss from wind and cold
- Defines the requirements for the power supply (a regular 220 V outlet or an industrial 380 V network)
This parameter determines the heating range of the working element (soldering iron) required to melt the connected surfaces of pipes and fittings.
- The range from 0 to 300 °C allows the device to be used for welding various types of thermoplastics (polypropylene, polyethylene, PVDF)
- For the most common polypropylene pipes, the optimum temperature is about 260 °C
- The presence of a thermostat allows you to accurately set the desired value and avoid overheating of the material
- Too low a temperature will lead to "cold soldering" and joint leaks
- Exceeding the temperature (closer to 300 °C) causes plastic degradation and can block the inner section of the pipe
This parameter determines the heating range of the working element (soldering iron) required to melt the connected surfaces of pipes and fittings.
- The range from 0 to 300 °C allows the device to be used for welding various types of thermoplastics (polypropylene, polyethylene, PVDF)
- For the most common polypropylene pipes, the optimum temperature is about 260 °C
- The presence of a thermostat allows you to accurately set the desired value and avoid overheating of the material
- Too low a temperature will lead to "cold soldering" and joint leaks
- Exceeding the temperature (closer to 300 °C) causes plastic degradation and can block the inner section of the pipe
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
Similar products
Reviews about The device for butt welding of HDPE pipes PROSVAR With 315 CNC ( 0 )