Butt welding machine for HDPE pipes PROSVAR With 200 CNC
Russia
Russia
Description
PROSVAR C 200 CNC is a butt welding machine used to connect sections of pipes made of polymer materials during repair and installation work by private craftsmen, professional installers of equipment for water, gas, heat supply systems, communications for the transportation of liquid or gaseous media.
Functional features
The device is designed to work with 63-200 mm pipes, regardless of the SDR indicator – the ratio of the outer diameter and wall thickness. The model is equipped with a hydraulic drive, which ensures a stable speed of movement of the working part during the entire cycle under variable load conditions.
The welding process is fully automated, the heating element rises and falls without operator intervention, which improves the quality of work and eliminates the impact of human factors.
The movement takes place without shocks. The operator has access to the stop control function of the device, and it is possible to perform operations with considerable effort.
Package contents:
- welding machine;
- the end face;
- a centralizer equipped with 4 clips and wheels to facilitate movement;
- heating element with automatic heater removal device.;
- reduction inserts 63-180 mm with a set of fasteners;
- electric oil station with CNC control unit;
- set of tools and spare parts;
- a case for storing and transporting equipment;
- user manual.
Appearance and ease of use
The hydroelectric power station is available in an IP54 metal housing, which provides effective protection against moisture and dust ingress. To prevent the pipes from sticking to the heating panel, a Teflon coating is applied to the surface of the latter. The steel frame is equipped with 4 rings to securely fix the pipes. Its construction is reinforced with stiffening ribs.
For the convenience and efficiency of welding operations, clamping inserts are installed with a large enough area to prevent the pipes from slipping off when they are joined. They are made of aluminum alloy. The model is characterized by the possibility of precise control of operating parameters using an electronic temperature controller with a digital indicator.
Alloy hardened steel is used in the manufacture of the electric motor. A microswitch is placed on it to increase the safety of operation of the welding machine. This ensures consistently high cut quality and increased wear resistance of the part.
Equipment power supply
The welding machine is designed to be connected to a 220 V (50 Hz) single-phase mains. The equipment can be fully used when connected to a household or industrial power grid without restrictions.
How to choose
The C 200 CNC modification belongs to the category of automatic devices for performing butt welding of HDPE pipes. The determining parameter in the selection is the range of pipe diameters that can be connected using a particular model. When buying, it is worth choosing an option taking into account the prospects of using technology for the implementation of various projects, which is especially important when using it professionally.
Also, when buying, it is worth considering the power of the device, which determines the heating rate of the work surface and the overall performance of the equipment. The ease of use of the equipment is directly affected by its weight and dimensions. When choosing the optimal welding machine model for polymer pipes, the following factors must be taken into account:
- the purpose and diameter of the installed communications;
- the quality level of the resulting compound;
- the required resource of the selected equipment.
The presented model is characterized by ease of operation, ease of operation and parameter setting. The device has been certified, which confirms its compliance with current quality standards. It can be successfully used when performing installation and repair work by private craftsmen or professional installers.
Characteristics Butt welding machine for HDPE pipes PROSVAR With 200 CNC
General Specifications
Russia
Russia
Dimensions of packaged product
Specifications
This parameter characterizes the energy consumption of the equipment and determines its performance when welding pipes of various diameters
- Low–power models (0.6-2 kW) are hand-held devices for socket welding of domestic water supply systems
- High power (up to 61.5 kW) is typical for large butt machines working with large diameter main pipes
- The higher the value, the faster the heating element reaches the operating temperature after switching on
- The power reserve ensures stable heating when working outdoors, compensating for heat loss from wind and cold
- Defines the requirements for the power supply (a regular 220 V outlet or an industrial 380 V network)
This parameter characterizes the energy consumption of the equipment and determines its performance when welding pipes of various diameters
- Low–power models (0.6-2 kW) are hand-held devices for socket welding of domestic water supply systems
- High power (up to 61.5 kW) is typical for large butt machines working with large diameter main pipes
- The higher the value, the faster the heating element reaches the operating temperature after switching on
- The power reserve ensures stable heating when working outdoors, compensating for heat loss from wind and cold
- Defines the requirements for the power supply (a regular 220 V outlet or an industrial 380 V network)
This parameter determines the heating range of the working element (soldering iron) required to melt the connected surfaces of pipes and fittings.
- The range from 0 to 300 °C allows the device to be used for welding various types of thermoplastics (polypropylene, polyethylene, PVDF)
- For the most common polypropylene pipes, the optimum temperature is about 260 °C
- The presence of a thermostat allows you to accurately set the desired value and avoid overheating of the material
- Too low a temperature will lead to "cold soldering" and joint leaks
- Exceeding the temperature (closer to 300 °C) causes plastic degradation and can block the inner section of the pipe
This parameter determines the heating range of the working element (soldering iron) required to melt the connected surfaces of pipes and fittings.
- The range from 0 to 300 °C allows the device to be used for welding various types of thermoplastics (polypropylene, polyethylene, PVDF)
- For the most common polypropylene pipes, the optimum temperature is about 260 °C
- The presence of a thermostat allows you to accurately set the desired value and avoid overheating of the material
- Too low a temperature will lead to "cold soldering" and joint leaks
- Exceeding the temperature (closer to 300 °C) causes plastic degradation and can block the inner section of the pipe
Additional characteristics
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
Similar products
Reviews about Butt welding machine for HDPE pipes PROSVAR With 200 CNC ( 0 )