125mm A80 (14A 20/P80) self-locking disc with TSUNAMI holes
Russia
Russia
Description
Self-locking abrasive discs are in high demand because they are an excellent consumable for grinding a wide variety of surfaces: metal, plastic, wood, glass and even stone. Their great popularity is caused by an excellent combination of low price, ease of use, as well as versatility in application.
They are made on a paper or fabric basis, on which grains of silicon carbide, zirconium or corundum are applied. The abrasive is fixed with the help of special adhesive compositions, which holds it fairly securely when used. However, despite the fact that suchan abrasive wheelis very wear—resistant (although, of course, up to certain limits), it is still necessary not to overload it too much during operation, and most importantly, not to allow heating to a high temperature. The fact is that under its influence, the adhesion of the grains to the base is significantly weakened, as a result of which they begin to crumble prematurely, which has the most detrimental effect on the durability of the disks.
In order forthe abrasive wheelof this type not to overheat, special holes are often made on it, like those that can be seen on ventilated brake discs. However, they are not always present, and solid ones are no less popular.
One of the features and undoubted advantages of self-locking abrasive discs is that they are very easy and simple to mount on the tooling. On the reverse side, a special "Velcro" is applied to them, with which they are very tightly attached to the base, and during operation they do not shift at all. After the abrasive surface is worn out, it is enough to simply "peel off" the disc and install a new one in its place. It takes a few seconds for the masters to do this, so this operation practically does not lead to interruptions in work.
Self-locking abrasive discs are used for installation in manual angle grinders (so-called "grinders"), on special faceplates fixed with axes in electric drill cartridges, as well as in electric manual eccentric grinders. In order to choose the right abrasive wheel, which is necessary in this particular case, it is necessary to take into account a number of important factors.
First of all, it should be borne in mind that self-locking grinding wheels are produced with varying degrees of abrasive grit, and this criterion is perhaps decisive. For rough grinding, circles with large grain are best suited, and preferably zirconium, since it is most resistant to serious mechanical loads. Finer, finishing work should be done with discs with a fine abrasive. It goes without saying that a very important role in the selection of a self-adhesive abrasive wheel is also played by the material that they have to process.
As for such an important moment as their service life, it is influenced not only by the quality of the product itself, but also by how rigidly the support faceplate is fixed. It is significantly reduced by vibrations, since in this case a sufficiently serious shock load is placed on the abrasive layer, as a result of which it is painted out quickly enough.
Self-locking abrasive discs are available in several sizes, and the most popular of them are 125 and 150 millimeters in outer diameter. They are successfully used in woodworking enterprises, furniture factories, car service stations, locksmiths. They are often bought by those people who like to make something with their own hands from wood, metal, glass or stone.Characteristics
General Specifications
Russia
Russia
Dimensions of packaged product
Specifications
Terms of delivery
Who provides the delivery of goods?
On the Enex marketplace, you order the product directly from its supplier, and Enex employees organize the delivery in the way you choose.What are the delivery methods?
You can choose any convenient way for you to receive an order:-
Pickup from partner locations or from the manufacturer's warehouse
If the manufacturer or trading company has the possibility of pickup, you can pick up your goods yourself or use the services of any transport company. Pickup is free of charge. -
Delivery to the terminal by a transport company
Pick up the goods at the nearest terminal of the Business Lines shopping center or DHL in your city. The delivery time and cost depend on your region and the dimensions of the cargo - they will be known at the stage of ordering. -
Delivery to the door by courier of the transport company
Receive the goods at your address via a Business Lines courier or DHL. The delivery time and cost depend on the region and the dimensions of the cargo - they will be known at the stage of ordering.
How can I keep track of the shipped product?
After you have selected your preferred delivery method and placed an order, you will be able to monitor the change in its status by the number in your personal account, and track the immediate location of the product by the track assigned by the delivery service. You will also receive email notifications about changes in the status of your order. This way, you will always know where your product is located and respond promptly to changes.Payment methods
Payment by bank card online
You can pay for the goods with bank cards "Visa", "Master Card", "Mir", "JCB". Payment by bank card is made without commission.- your bank card number;
- expiration date of your bank card;
- CVV code for Visa / CVC code for Master Card: the last 3 digits on the signature strip on the back of the card;
- confirm the card transaction, for example, with a one-time password from an SMS.
Payment according to the invoice
On the checkout page, select the “Invoice payment” option, and after placing the order, the system will automatically generate and send you an invoice for payment to the specified email address.Payment with bonuses
The buyer can pay part of the order cost (up to 20%) with Enex bonuses. The procedure and conditions for calculating and debiting bonuses are specified in section 7 Rules of sale and delivery.The seller's indication on the marketplace
Various suppliers of tools and equipment trade on the Enex marketplace. These can be both manufacturers and trading companies. In this case, the Marketplace acts as an agent (Chapter 52 of the Civil Code of the Russian Federation). Enex itself can also act as a seller for some products. Learn more about ordering from different suppliers.Return of goods
Is it possible to return the purchased product?
If you are not satisfied with the product purchased on the Enex platform, you can return it or exchange it under the conditions specified below. Since buyers conclude direct purchase and sale transactions with manufacturers on the Enex platform, the return of goods is carried out directly to manufacturers.
Return of goods of proper quality
For individuals
The buyer-an individual has the right to refuse the ordered goods at any time before receiving it, as well as after receiving the goods - within 7 days, not counting the day of purchase. The return of the goods is possible if its presentation and consumer properties are preserved, as well as a document confirming the fact and conditions of purchase of the goods.
The buyer does not have the right to refuse a product of proper quality having individually defined properties if the specified product can be used exclusively by the buyer acquiring it.
In case of refusal of the goods of proper quality, the cost of services for the organization of delivery to the buyer is not refunded. Transportation costs for the return of goods of proper quality are borne by the buyer. The method of returning the goods is determined by the buyer.
For legal entities
The return (exchange) of goods of proper quality by the buyer, who is a legal entity (individual entrepreneur), is not allowed, unless otherwise provided by the agreement with the supplier.
Return of goods of inadequate quality
For individuals
The buyer, who is an individual, in cases provided for by law, may return the goods of inadequate quality during the warranty period for the goods and demand a refund of the amount of money paid for the goods. The goods of inadequate quality, in agreement with the buyer, can be replaced with a similar product of proper quality.
For legal entities
The buyer, who is a legal entity (individual entrepreneur), in the event of the transfer of Goods of inadequate quality to him, has the right to make claims provided for in Article 475 of the Civil Code of the Russian Federation.
Distribution of responsibility
In case of return/replacement of low-quality goods, the cost of delivery of the goods is paid by the supplier. The supplier reserves the right to accept the goods of inadequate quality from the buyer and, if necessary, to check the quality of the goods. If, as a result of the examination of the goods, it is established that its shortcomings arose due to circumstances for which the supplier is not responsible, the buyer is obliged to reimburse the supplier for the costs of conducting the examination, as well as the costs associated with its storage and transportation of the goods.
If any defect is found in the product, the manufacturer and (or) the marketplace has the right to require the buyer to provide a photo of the product, the claimed defect, packaging, labeling (nameplate) of the manufacturer.
If the buyer, who is a legal entity (individual entrepreneur), refuses the goods of inadequate quality, such buyer is obliged to return such goods to the supplier. The buyer - an individual can also return the goods to the address of the supplier or Marketplace.
Transportation costs for the return of low-quality goods are borne by the supplier or Marketplace.
The difference between the shades of the goods in the photo and the real goods is not a sign of poor quality.
For questions about the return or exchange of goods, please contact us by phone 8 800 707-56-00 or by email: info@enex.market .
