Hand hoists are indispensable assistants in production, construction or workshop for lifting and precise positioning of heavy equipment.
Manual gear hoists are used in all areas of modern industry. These are small-scale mechanized devices for lifting and holding loads in industrial premises, construction sites, during the repair of valves, pumps, heat exchangers and other devices during the installation and dismantling of parts and components of equipment. The gear mechanism is equipped with an automatic locking brake for lifting the load. This allows you to lock and hold the load at any height.
General advantages
- Load capacity from 0.5tons to 20 tons
- Lifting height from 1.5 to 18 meters
- Load capacity up to +25%
- Commissioning: unpacked - hung up - started lifting
- Each hoist is tested at the factory before shipment
- Compact size, easy to install, easy to take off.
- It has a simple design, does not require connection to electricity
But what is their difference? We present three unique series:
The NORMA tal is a proven classic
The NORMA series. The shape and construction of the hoist is widely known in our market. The hoist is used everywhere: in production, construction, in everyday life. It has an ideal price-quality ratio. It's great for most normal jobs, which is why the series is called the NORM.
- Load capacity +10%
SEVERE hoist – for the most severe conditions
The SEVERE series. This is a professional hoist for daily work in production. The hoist uses a gear mechanism from a well-known Japanese manufacturer. The hoist has an extended service life compared to other hoists available on the market. The name of the series SEVERE translates as "harsh", "cruel", "hardest", "fierce", so we named the series NORTH!
- Can be used for heavy work in three shifts
- The chain is lacquered with protection from dirt and corrosion
- Load capacity +25%
The CLEVER hoist is an intelligent approach
The CLEVER series. This is a professional hoist for experienced users who understand the difference between a gear and lever manual chain hoist. The hoist is equipped with a control lever instead of a control chain. The lever is designed to control the lift. There is an "up", "idle", "down" switch on the head. In the "idle" position, you can freely stretch the load chain to the working position — this is convenient, it speeds up the work. There is no idling on conventional gear hoists. The lever hoist does not make any noise during operation.
- Load capacity +15%
- There is an "idle" mode
Regardless of whether you need a hoist for periodic work in the garage or for daily workloads in production, there is an optimal solution in the OSALIFT range. Choose your tal on the marketplace: the proven "NORMA", the hardy "SEVERE" or the innovative "CLEVER"!
Ocalift manual chain hoists on Enex