VIKING MIG 200 DOUBLE PULSE SYNERGIC PRO Semi-automatic welding machine
Professional semi-automatic welding machine VIKING MIG 200 DUBLE PULSE SYNERGIC PRO It has the functions MIG/MAG, TIG, MMA, SPOT, SROT. The inverter supports the MIG/MAG double pulse welding technology, which makes it possible to weld all types of aluminum alloys, steel, stainless steel, copper, cast iron, etc. In comparison with conventional semi-automatic machines, the presence of synergetics (control control), allows both beginners and professional welders to use the welding machine. VIKING MIG 200 DUBLE PULSE SYNERGIC PRO is simple and convenient to use during welding operations.
The adjustment of the arc voltage from 24A to 200A and the wire feed speed both on the control panel of the welding semi-automatic and with the help of a regulator located on the burner handle, gas purge functions, Burn-back mode and 2T/4T 2TS/4TS allows you to control the welding process and obtain perfect seam quality. 35 memory cells and programs with the provided settings allow you to reduce the time of setting up the inverter and defines it as a professional source for work of high complexity.
Features of the device
Double pulse mode
Convenient work with thin metal
Reduces heat investment in metal products, thereby significantly reducing the curvature of the structure. Creates a beautiful, external appearance of the welding seam without welding splashes.
Synergetic control algorithm
In the welding power supply of the inverter type VIKING MIG 200 DOUBLE PULSE SYNERGIC PRO an automated system for managing functionality based on synergy is built in. The synergy-based system ensures stable operation of the welding power inverter. The stable connection of the components of the welding semi-automatic in automatic mode makes it possible to adjust the voltage of the welding arc when the feed rate of the filler material changes.Thanks to this, the user of the equipment can not waste extra time on additional settings of the device, and this will help to increase the volume of production, improve welding properties and not be distracted from the production event.
TIG DC mode
Manual arc welding using a non-melting electrode under the protection of TIG inert gases (Tungsten Inert Gas) allows the welder to use a variety of metals and alloys from them, as well as stainless steel when using currents on the apparatus from 10A to 200A.When the welding inverter is in this mode, you can change the starting and final gas purge settings, which will increase the welding level. If you need to get a high-quality seam and the desired depth of penetration, then use this mode. To obtain an optimal arc between the electrode and the product, use the LIFT mode.
MMA mode
The MMA mode (Manual arc welding) is supported in an inverter-type welding power supply VIKING MIG 200 DOUBLE PULSE SYNERGIC PRO with the use of electrodes of different diameters. A wide range of welding currents (20-200A) and different modes (MMA PULSE, HOT START, ARCFORCE, VRD) makes it possible to adjust the inverter to the thickness of the material and the tasks set. In manual arc welding mode, the apparatus shows high-quality excitation of the welding arc.
Functions 2T/4T 2TS/4TS
The 2T/4T function makes it possible to reduce the load on the welder's hands. To obtain accurate and not large seams, use the 2T mode. If you need to get long seams or there is a need for prolonged use of welding, then use the 4T mode. In the MIG/MAG mode, when the polarity is changed, the device can cook with a powder wire. MIG/MAG makes it possible to weld without using a protective gas, this becomes possible thanks to the structure of the powder wire itself, which melts during welding and creates conditions for protecting the welding bath.
Semi-automatic welding in Pulse mode, Duble Pulse
In the MIG/MAG pulse welding mode, short pulses of high-frequency current are applied to the welding current (A), which force the melting of the welding wire, which reduces the amount of splashes and deformation of the seam. Thanks to this mode, a more dense structure of the welding seam is achieved. Semi-automatic welding in pulse mode allows you to remove up to 95% of all impurities and gas bubbles from the weld due to the action of high current pulses that shake the welding bath, making it more homogeneous. The MIG/MAG pulse welding mode creates a controlled heat supply to the welding seam, improving the welding quality. Thanks to this mode, overheating of the metal is eliminated, which allows to improve the appearance and geometry of the welding seam. The MIG/MAG Pulse, Duble Pulse mode is used for welding products made of aluminum alloys, stainless steel and other non-ferrous metals.
Welding arc inductance adjustment
The welding arc setting mode allows you to make the welding process smoother. In the semi-automatic MIG/MAG welding mode, the welding wire creates a short circuit when touching the product, which provokes a drop in the voltage level to almost zero. This entails a sharp change in the welding current and rapid combustion of the welding wire with significant metal splashing. Adjustment of the inductance of the welding arc in VIKING MIG 200 DUBLE PULSE SYNERGIC PRO allows you to solve this problem.
The maximum value of the inductance allows you to perform a smooth, smooth seam roller and deep penetration of the material being welded.
The minimum value of the inductance allows you to make a convex weld roller and a small penetration depth, an increase in metal splashing is possible.