Chiseling cutters of the Киржачский инструментальный завод

Slotting cutters are used for machining various materials by chiseling during reciprocating movements of the cutter.

Slotting cutters are used for processing flat and shaped surfaces along closed and unclosed contours. With their help, it is possible to obtain products of convex, concave, spherical, spherical and complex shapes. Slotting cutters are used when processing the workpiece at close range or at an angle. In the latter case, they help to give the desired shape to hard-to-reach surfaces located in the inner part of the workpiece.

Slotting cutters are needed to obtain grooves, grooves, corners on different workpieces. They work the same way as planing, but only in the vertical plane. Slotting cutters are installed in different types of machines: slotting, turning, automatic, semi-automatic, special purpose. They remove layers of material from the processed part sequentially until the product of the required shape and size is obtained.

Slotting cutters, like any cutting tool that we manufacture, have a high hardness, at the same time, the cutting part of the cutter is made of a sufficiently viscous material so that the cutting edges are not painted under chip pressure during operation.

The cutting speeds during chiseling are so moderate that there is usually no need to use carbide plates. We produce almost all slotting cutters in one piece or, more often, with a solder plate made of steel P18 or P6M5.

Varieties of slotting cutters

Our catalog has slotting cutters of different types:

• Slotted. Such products are used for the manufacture of grooves, various planes or recesses, as well as when performing cutting operations.
• Double-sided passageways. They can be used not only on curved, but also on vertical surfaces.
• Keyways. Such a slotting cutter GOST 10046-72 is used for processing various materials during vertical planing operations.

Slotting incisors

In the practice of a slotterer, it is often necessary to cut off excess material from the workpiece or even cut it into pieces. Slotting slotted cutters are used for this operation.

With the help of slotting cutters for slotting machines, holes of rectangular or square shape are also processed, suitable for cutting external and internal grooves or grooves.

We have slotting slotted cutters with sizes from the smallest 16x10x150mm, the minimum width of the cutting part is 4mm, the reach is 40mm, to large cutters of 63x40x600mm with a cutting part width of 28mm and a reach of 250mm.

Double-sided slotting cutters

Double-sided slotting cutters are designed for processing metal parts by cutting.Therefore, they are made of high-strength alloys, which in hardness significantly exceed the machined parts. This guarantees a long service life of the cutters.

Such cutters are often used to work when feeding in opposite directions.

Slotting cutters for keyways

Chiseling of keyways is one of the most common operations in the slotting business. Keyway cutters are used to produce keyway grooves in gears, hubs, gears, bushings, half couplings, couplings, pulleys, etc.

In our catalog on Enex you will find a large selection metal cutters.