INVAMAT 900 fire protection couplings
INVAMAT 900 is a fire protection sleeve that meets the requirements of GOST, ETAG, BS and UL organizations and is approved by the FM system to create a fire protection and smoke protection around installed pipe penetrations.
Scope of application
The fire protection coupling is designed to simplify the fire protection of combustible pipes laid in walls and floors with a set fire resistance limit.
Applicable to plastic pipes with a diameter of 16 — 250 mm
 |
Features
- Snap-on mechanism for quick and easy locking;
- Flexible hook placement for easy attachment;
- With the possibility of dismantling;
Technical specifications
- Packing: Corrugated box (20 pcs)
- Base materials: Concrete, Drywall, Brickwork
- Pipe diameter range: 16 - 250mm
- Expansion coefficient: 1:17
- Expansion: 140 °C
- Can be painted: No
INVAMAT belt type fire protection coupling CP 646 CFS-IN
INVAMAT belt type thermal expansion fire protection coupling CP 646 CFS-IN is designed for use as a shut-off device in nodes intersections of enclosing structures with combustible pipelines made of polymeric materials (PVC, PE, PP), as well as metal pipes in combustible rubber insulation.
Scope of application
- Designed for fire protection of steel pipes, PVC, PE, PP
- It is used with various types of insulation
- It is used in floors made of concrete, brick, etc.
Advantages
- Versatility — one product for pipes made of different materials and different diameters
- Quick and easy installation: no drilling and no additional tools required
- Easy installation in holes with minimal gap between pipe and base material
- High noise insulation index
Technical specifications
- Color: Grey
- Bulging: Yes
- Roll Length: 10m
- Width: 120 mm
- Thickness: 2 mm
- Application temperature: -5°C – +50°C
- Temperature resistance: -20°C – +100°C
- Expansion temperature: +180°C
INVAMAT 710 thermal expansion sealing tape
Thermal expansion sealing tape INVAMAT 710 with an applied adhesive layer is a flexible tape, from 1 to 10 mm thick, which is designed to seal joints of enclosing fire structures, such as:
- Fire doors (installed along the inner perimeter of the door frame, or along the outer perimeter of the door leaf);
- Pipe penetrations (installed along the outer circumference of the pipe);
- Sealing of ventilation passages through enclosing structures and floor slabs.
Under the influence of open fire and high temperatures, the INVAMAT 710 tape increases in volume, filling the free space in the junction, thus blocking the penetration of fire and smoke.
Advantages
- Versatility and ease of use-to install the sealing unit of the pipe passage, it is enough to cut off the tape of the required length and paste it on the pipe, then place it in the passage. The pipe penetration assembly mounted in this way does not protrude beyond the overlap and enclosing structure, it looks more aesthetically pleasing, which allows for better finishing work and avoids the use of fire protection couplings.
- Compact during transportation and storage (1 roll of thermal tape with a diameter of 100 mm. replaces 10 couplings of equal diameter.
- The tape is made in various thicknesses and widths, with and without an adhesive layer, which makes it possible to successfully solve a wide range of tasks.
After installation, it is allowed to paint the tape, or apply another decorative coating.
Properties and characteristics
- Color: Black
- Thickness, mm: From 1 mm
- Width of the tape, mm: 10 – 500 mm.
- Tape length per roll, m: 50 and 100
- Degree of expansion, %: 500
- Density, g/cm3: 1.1±0.2
- Toxicity: Non-toxic. Does not emit harmful substances during operation
Packaging options
Ribbon - 1 x 10; 1 x 15; 1 x 20; 1.5 x 10; 1.5 x 15; 2 x 10; 2 x 15; 2 x 20; 2 x 30; 2 x 40
INVAMAT CP 651 firebags iN
Application areas
- Permanent fire-fighting sealing of cable penetrations in partitions and floor slabs
- It is especially suitable for permanent fire sealing when compliance is required due to the possible frequent change of cables
- Temporary sealing of fire-fighting penetrations during installation work
Advantages
- Cost-effective solution due to optimal penetration dimensions
- Suitable for penetrations up to 1200×1500 mm in partitions, 1000×700 mm (700x∞ mm)* in the floor plate
- Ready-made solution immediately after installation
- Quick and convenient installation and disassembly
- Possible reuse
- It can be used in plasterboard partitions
Instructions for use
Before starting the installation, make sure that the cables are installed and secured according to the standards. Place the first layer INVAMAT CP 651 iN, if possible, under the cable duct. During the subsequent laying of pillows, it is necessary to leave an overlap of at least 20 mm on each side. Fill the opening tightly. To obtain the necessary density, it is recommended to tamper the cushion on the plane before placing it in the opening.
When installing in a horizontal ceiling, it is necessary to use a wire mesh (wire > 5 mm in diameter / grid < 50×50 mm). Secure it from below with anchors. Fire protection cushions should be laid on a grid, offset by 1/2 of the width of the next cushion.
The free space between the cables must be filled with INVAMAT CP 651 iN fire protection mastic. After installation, it is necessary to make sure that the cushions are installed correctly and there are no voids left in the passage.
Are not intended for use
- With pipes made of corrugated or spiral wound material and cast iron
- In highly corrosive environment
- In places immersed in water
- In installations with a high level of smoke generation
Cable penetrations
|
Type of passage |
Fire resistance limit |
Minimum overlap thickness |
Additional conditions |
|---|---|---|---|
|
Universal cable routing |
IET 120 |
≥ 150 mm |
No |
|
Metal modular cassette with a cell of 100x100x400 mm, embedded in concrete |
IET 180 |
≥ 180 mm |
No |
|
Universal cable routing |
IET 180 |
≥ 200 mm |
Coating of cables 200 mm from the edge of the tunnel with INVAMAT CP 651N fire protection coating. The thickness of the dry layer is 1 mm. |
Technical specifications
- Color: White
- Density: 0.35 g/cm
- Temperature of the beginning of thermal expansion: +180°C
- Dimension (LxWxH):
- INVAMAT CP 651 iN (large) 300x170x30
- INVAMAT CP 651 iN (medium) 300x80x30 mm
- INVAMAT CP 651 iN (small) 300x40x30 mm
- Temperature resistance from -40°C to +120°C
Invamat fire protection solutions at Enex
Invamat product catalog on Enex